Mingjiang Electrical Co., Ltd. products

The CG series cable lugs are tailor-made for heavy-duty usage and are highly suitable for grounding structures and equipment, be it indoors or in outdoor settings. These lugs are also well-suited for medium voltage applications of up to 35KV. They are crafted from high-purity copper tubing with a purity level of more than 99.9% and are annealed to ensure durability.

TTL series lugs are manufactured from electrolytic Copper tube with a purity greater than 99.9%. The dimensions of the tube are designed to obtain the most efficient electrical conductivity and mechanical strength to resist vibration and pull out. Mingjiang lugs are annealed to guarantee optimum ductility, an absolute necessity for connectors which will have to withstand the severe deformation arising when compressed and any bending of the palm during installation. In applications subject to vibration, terminals have to perform a reliable connection, the annealing process plays a vital role in avoiding cracking or breaks between the barrel and palm. The barrel length has been designed to allow easy and accurate positioning of the dies during the crimping operation. Lugs are electrolytically Tin plated to avoid oxidation.

The SCL series cable lugs are designed for heavy duty, for grounding structures and equipment both indoors and outdoors and for medium voltage applications up to 35kV. SCL series terminals are made from high purity Copper tube with a purity greater than 99.9%, and are annealed. They feature a double length barrel for enhanced electrical and mechanical performance in heavy duty applications. The absence of an inspection hole prevents the entry of water or moisture into the crimped joint making these terminals suitable for outdoor applications. The terminals are electrolytically Tin plated to prevent atmospheric corrosion.

Copper palm fixing - Aluminium barrels. The barrels of series DTL connectors are made from Aluminium of a purity equal to or greater than 99.5%. The barrel is friction welded to the palm thus achieving the best possible transition between the Copper palm and Aluminium barrel. Barrels are capped and filled with grease so as to avoid oxidation of the Aluminium

Our Electrical Interconnect Heat Shrinkable Tubing boasts a one-piece design, made up of a transparent heat shrinkable sleeve and fluxed solder. With this tubing, you can get insulation, inspection, strain relief, and waterproofing in one place. It simplifies the insulation process, making it easy and affordable. Additionally, the color hot-melt glue located on both ends of the heat shrinkable tube makes it remarkably convenient to use the precise wire dimensions for your project.

Non-insulated Ring Terminals are Ring terminals without insulation. They are electrical connectors used to connect and terminate wires in an electrical circuit. As the name suggests, these terminals do not have insulation on the terminals, making them a suitable option for applications where the wire is routed through an insulated component, such as a conduit or wire duct. These terminals have a ring-shaped end that fits onto a terminal or component in the circuit and a barrel connector that is crimped onto the wire. Ring terminals without insulation are manufactured with a range of materials, including copper,and brass, to accommodate different types of electrical systems and applications.

Material: Terminal Body: Copper or brass. Plating: Tin. Brazed Seam Only copper.

Material: Terminal Body: Copper or brass. Plating: Tin. Brazed Seam Only copper.