Murphy Industrial Products Inc
6 products found

Murphy Industrial Products Inc products

Blocks & Pulleys - Block W/ Hook

Alloy With Hook Bronze Bushed

Snatch Block Alloy With Hook: Snatch blocks double the pulling power of any winch, or aid in angled pulls. They also reduce heat build up and amp draw. Snatch block pivots at the pulley pin to allow quick attachment to your cable.

Blocks & Pulleys - Block w/ Shackle

Snatch Block Bronze Bushed - WLL 2-8 Tons

Snatch Block With Shackle and Fitted with Swivel Eye: Snatch blocks double the pulling power of any winch, or aid in angled pulls. They also reduce heat build up and amp draw. Snatch block pivots at the pulley pin to allow quick attachment to your cable.

Blocks & Pulleys - Block - Tail Board

Tail Board Bronze Bushed, Painted Blue - WLL 2-8 Tons

Snatch blocks double the pulling power of any winch, or aid in angled pulls. They also reduce heat build up and amp draw. Snatch block pivots at the pulley pin to allow quick attachment to your cable.

Gin Block

12 Inch Hoisting Block/Gin Wheel - Up To 7/8 Inch Rope 171100

12" Gin Wheel w/ Forged Hooks. For Rope Size up to 7/8". Work load limit is stamped/engraved into the wheel.

Blocks & Pulleys

Single Swivel Eye

Zinc Plated to Protect Against Rust and Corrosion. Powder Metal Bushing to Extend Pulley Life and Provide Smooth Operation. For Rope Up to 3/8". Working Load Limit Stamped on Pulley Body. For Indoor or Outdoor Use.

High Carbon Steel

M-Sling - Eye and Eye Slings for Lifting - Vertical - 2 PLY, 2 Inch Wide

M-Sling Eye and Eye Slings for lifting, Type 3 Flat Eye Sling - Synthetic web lifting slings offer a number of advantages for rigging purposes: Strength, Convenience, Load protection, and Economy. Being light weight and pliable the EE sling offers great versatility able to make lifts of a variety of materials. Eye and Eye Slings may be used in a vertical, choker or basket type hitch. Eye and Eye lifting slings are susceptible to cuts and abrasion damage, as well as damage from temperatures above 200°. These lifting devices should be protected from sharp edges, sharp projections and heat sources such as steam pipes, open flame and welding splatter. *!* NEVER EXCEED THE WORKING LOAD LIMIT *!*