Refine by
Hilliard Companies Equipment & Supplies
51 equipment items found
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO Hydraulic Clutch Assemblies provide high-torque engagement for industrial applications. Available in variable and fixed displacement types, they operate at pressures up to 5,000 psig (350 bar). Designed for high-speed operation, these assemblies feature SAE mounting and spline shafts, ensuring compatibility with open and closed-loop circuits. Ideal for marine, oil & gas, and power ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc diameter of 12" and is offered in 4 sizes to accommodate a ½", 1", 1-3/16", and ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard M900SH brake caliper is a floating spring applied, hydraulically released brake for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications and has been designed for use in many different extreme environments. The M900SH is capable of producing 170,000 LBF (750 kN) of braking force. The floating design can accommodate up to 1 inch of axial ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO coalescing systems are the ideal way to remove moisture contamination in any liquid fuel. HILCO has been manufacturing coalescers for liquid fuels for over twenty-five years. Systems are available with flow capacities as high as 1500 GPM (5700 ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard M500HS brake caliper is a hydraulic applied, spring retracted brake caliper for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications and has been designed for use in many different extreme environments. The M500HS brake caliper is capable of producing a maximum 27,000 lbf (120 kN) of braking force at 1600 psi (110 bar) and has been ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard MK1400 is an electromagnetic, fail safe caliper brake. Spring applied, electric released, it is suitable for holding duty and emergency for applications such as theatrical stage lifts, elevators and cranes. Alternative mounting arrangement: pin mounting, base mounting horizontal and base mounting angle. The MK1400 is capable of producing a maximum 1,400 LBF of braking force with up ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Flame clutch includes all of the design advantages of the Fury but also includes several additional features. The clutch is fully tunable with optional weights. The optional weights alow the racer to make small adjustments to the engaging speed for optimal performance. The shoes have been designed to reduce chatter and provide smoother engagement over the Fury clutch. The shoes are lighter ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard BBH2 Power Unit incorporates an engineered hydraulic circuit to control the brake torque during a typical stop. Large capacity hydraulic accumulators provide additional volume for precise control of brake pressure. Equipped with manual overrides and hand pump for power outages, high pressure filtration and control braking mode to meet sophisticated braking system ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard M500SH/HR brake caliper is a spring applied, hydraulically released brake for use in heavy duty industrial applications. The brake comes standard with marine grade epoxy paint suitable for outdoor environments. The M500SH is available with standard force ratings. which when paired with the correct disc size produces an exact braking torque for the application. The caliper features ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Hilliard offers a Continuously Variable Transmission that is more advanced than any other belt drive system currently on the market. The Hilliard clutch system utilizes a tight belt which allows for seamless engine braking and belt protection at start up and during overload situations, to extend belt life. Hilliard's CVT system is designed to fit a wide variety of clutch envelopes, so no ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard Front Drive System is an electro-mechanically activated bidirectional overrunning clutch. When 12 volts of power are sent via the 4WD switch, the unit is activated to engage both front wheels instantaneously, whenever the rear wheels lose traction. The clutch also releases or overruns automatically the instant the rear wheels regain traction. Because torque is transmitted to both ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO portable filters are an economical solution for removing water and particulate from oils, fuel and other fluids. Filters can be built to ASME Code standards. Hilco portable filters can be used for many different fluids, including: Mineral-based lubricating, hydraulic, and insulating oils Synthetic lubricating and hydraulic (EHC) fluids Fuel oils, kerosene, gasoline Ethylene glycol mixes ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Hilliard BBH4 power unit is suitable for brakes demanding pressures above 3,000 PSI. It includes on/off and ramped braking modes. The power units are highly customizable, allowing customers to specify component types for several items in the system, including the motor, electrical panel, RTD, and pressure transmitter. The unit includes an isolated hand pump specifically useful in power ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard M700SH brake caliper is a spring applied, hydraulically released brake for use in heavy duty industrial applications. The brake comes standard with marine grade epoxy paint suitable for extreme environments. It is available with standard force ratings which, when paired with the correct disc size, produces an exact braking torque for the application. The caliper features "maintenance ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Hilliard Electric Brakes provide positive stopping and reliable holding of rotating devices on demand-every time. Spring engaged when current is interrupted and electromagnetically relased when voltage is applied, these brakes are designed for maximum flexibility and long, dependable service. Each brake has an easy-to-adjust wear bolt to compensate for friction service wear and extend the life of ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Hilliard standard disc hubs are supplied with parallel or tapered bores and keywayed to accommodate customer requirements. Hubs are manufactured from either iron or steel. Special hubs with keyless locking devices are also ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Standard disc diameters range from 6 inches to 54 inches, with other sizes supplied to order. Discs are bored and drilled to fit Hilliard standard Hubs, meeting customer ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard MK4800 is an electromagnetic, fail safe caliper brake. Spring applied, electric released, it is suitable for holding duty and emergency for applications such as heavy duty lift operations, conveyors, elevators and cranes. Alternative mounting arrangement: pin mounting, base mounting horizontal and base mounting angle. The MK4800 is capable of producing a maximum 4,800 LBF of braking ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Operates on any pressurized gas (0-220 psig). Break-away torques up to 3,700 ft lb. Output speeds up to 12,000 RPM. For industrial gas turbine or reciprocating engines. Standard and custom interfaces available. Helical rotor design. Positive displacement. Roller-ramp overrunning clutch to pre-engage the starter to the turbine. Dynamically balanced, gas tight. Delivers rated torque at 0 ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc diameter of 12" and is offered in 4 sizes to accommodate a ½", 1", 1-3/16", and 1-1/2" thick ...