Panel Components & Systems, Inc. (PC&S) products

Complete 1-phase and 3-phase digital universal metering system. Measures a standard range of 17 different parameters. Four easy to access front control buttons to scroll up or down through the parameters. Blue LED display is designed to be sunlight readable over a very wide viewing angle. Plug-in communications modules for RS485, pulsed output and Ethernet. MODBUS RTU and BACnet MS/TP communications protocols for use with PC, PLC, RTU, Data Loggers and SCADA programs.

The Sentinel 150 line provides high performance battery charging for continuous float charge and standby power applications. Switch mode technology provides major advances in power supply and battery charger design, giving a compact and lightweight construction, improved power efficiency, low heat dissipation, wide supply voltage tolerance and low output ripple.

High quality, rugged construction is built into every switch that PC&S sells.  Whether your requirement is for a control switch, an instrument switch, ON-OFF switch, Multi-step switch, a changeover switch, a voltage change switch, PC&S has the right switch for you.

Small, light weight, low cost sealed contactor with a current rating up to 500VDC. Switch DC loads at both low and high voltage from 12V to 900V DC. Coil power is very low, built-in coil, economizer is only 1.7W

This Hall Effect current sensor is based on open loop compensating principle and designed with a split core and a high galvanic isolation between primary and secondary circuits. It can be used for measurement of DC current etc. The output of the transducer reflects the real wave of the current carrying conductor.

This Hall Effect current sensor is based on open loop compensating principle and designed with a split core and a high galvanic isolation between primary and secondary circuits. It can be used for measurement of DC current etc. The output of the transducer reflects the real wave of the current carrying conductor.

The DKM-409 is a precision instrument designed for displaying various AC parameters in 3-phase distribution panels.

The DKM-405 is a low-cost precision instrument designed to display various AC parameters in a 3-phase distribution panel.