7 products found
PSE AG Products
-
Photovoltaic Modules
For almost 20 years, PSE has developed and built test stands for performance testing and quality control of photovoltaic modules. Our ready-to-use products are designed in accordance with internationally recognized testing standards and with the wishes of our customers.
-
Soras - Model LS - Steady-State Solar Simulator for PV Modules
In certification laboratories for photovoltaic modules, steady-state solar simulators are mostly used for stabilization / light soaking tests (MQT 19) and hot-spot endurance tests (MQT 09) according to IEC 61215 and IEC 61730. An initial stabilization is required for all PV modules that undergo a standard test procedure. For the hot-spot endurance test (MQT 09), it is important that the operator has easy access to the front and back site of the module. ...
-
Testing Equipment for Solar Thermal Collectors - Steady State Solar Simulator
Our steady state solar simulators enable you to test and develop solar thermal collectors independent of weather and season, faster, more efficiently and more comprehensively than ever before. Both simulators are turnkey products, delivered 100 % ready to go! Our product line for the testing of thermal collectors includes the following steady state solar simulators:
-
Soras - Model ST6 - Steady State Solar Simulator for Solar Thermal Collectors
Our steady state solar simulators enable you to test and develop solar thermal collectors independent of weather and season, faster, more efficiently and more comprehensively than ever before. SORAS-ST6 is a turnkey product, delivered 100 % ready to ...
-
Soras - Model ST8 - Steady State Solar Simulator for Solar Thermal Collectors
Our steady state solar simulators enable you to test and develop solar thermal collectors independent of weather and season, faster, more efficiently and more comprehensively than ever before. SORAS-ST8 is a turnkey product, delivered 100 % ready to ...
-
Testing Equipment for Solar Thermal Collectors - Tracker
For regions with stable weather conditions, PSE provides two outdoor bi-axial trackers, which keep test samples perpendicular to the sun. PSE trackers are designed for outdoor testing and certification of both solar thermal collectors and PV modules. With our trackers it is possible to test more than one collector at the same time. Simultaneous collector testing can allow direct comparison of different collector designs under identical conditions or increase the measurement throughput of collectors and modules. In our product line we offer the following tracking systems:
-
PSE - Model P4 - High-Precision Outdoor Trackers Give
PSE’s high-precision outdoor trackers give you top-quality testing options. We offer two different tracking systems, the larger and more accurate Tracker P4 and the smaller Tracker P2. Our tracking systems can be combined with different measurement equipment to fulfill requirements of solar thermal collector and PV module test standards. Combined with our Heliosensor it is ...
-
PSE - Model P2 - High-Precision Outdoor Trackers
PSE’s high-precision outdoor trackers give you top-quality testing options. We offer two different tracking systems, the larger and more accurate Tracker P4 and the smaller Tracker P2. Our tracking systems can be combined with different measurement equipment to fulfill requirements of solar thermal collector and PV module test standards. Combined with our Heliosensor it is also possible to reach higher tracking accuracies required for testing ...
-
Heat Pumps and Chillers
PSE AG is offering turnkey testing solution to test the performance of heat pumps according the international standards e.g. DIN EN 16147, DIN EN 15879-1 and DIN EN 14511. The test equipment is designed to test performance (COP) of heat pumps and chillers under different operating conditions. This is needed for the EHPA or the heat pump Keymark certification tests. The test procedures are already pre-defined in the software which guarantees for a high degree of automation.
-
PSE - Dynamic Thermal Module
For testing heat pumps or chillers the temperature level of the heat source is typically at -5 to 10 °C. Whereas the temperature level for the heat sink is typically between 20 – 60 °C. To cover this wide range, we are offering our dynamic thermal modules with water or brine as heat transfer ...
-
PSE - Static Thermal Module
This device is designed to supply water on a constant temperature level. Static thermal module with one tank. This module can be used for heating (source) or cooling (sink) during the performance test for electrical or thermal driven heat pumps or ...