Solarventi products

SolarVenti® SV3 for wall mounting. The size of SolarVenti® SV3 makes it easier to find a horizontal or vertical space for its location, it has a Ø125 mm fan. The air that smaller models produce, do not generate the temperature and volume of air that other larger models there is therefore no need for a regulator so they are supplied as standard with a simple switch. As accessory you can buy a thermostat. The SV3 is supplied with all accessories for wall mounting.

The size of SolarVenti SV7 makes it easier to find a horizontal or vertical space for its location, it has a Ø125 mm fan. Its airflow between 40 and 100 m3 / h, heats 110 m3 of air to approximately 20° C above the outside air temperature. The SV7 is supplied with all accessories for installation on wall. The SV7 Slimline can be ordered with an electronic Regulator or a simple switch.

SolarVenti SV14 one of the best selling models mainly because of the size. With its 201 cm long and 70 cm wide is still small, it is mounted both horizontally and vertically. Its airflow between 60 and 110 m3 / h, heats 110 m3 of air to approximately 30° C above the outside air temperature. The SV14 is supplied with all accessories for installation on wall. The SV14 Slimline can be ordered with an electronic Regulator or a simple switch.

SolarVenti SV20 is used for spaces up to 100 m2 and can be mounted either vertically or horizontally on wall or roof. Its airflow between 80 and 140 m3 / h, heats 140 m3 of air to approximately 35° C above the outside air temperature. SV20 is supplied with all accessories for wall mounting. SV20 Slimline can be ordered with an electronic Regulator or a simple switch.

SolarVenti SV14K model for basements - Complete system with 1.40 m2 surface, for basements up to 55 m², including wall mounting kit and electronic regulator with room thermostat, speed regulator for the fan and on / off. The air outlet connection: Ø125 mm. Solar cell and fan mounted on the back of the collector. The model for Basements SolarVenti® (SVK) is a SolarVenti® (SV) model specially modified for use in the basement area with greater capacity of solar cell and the air outlet closer to the edge. The model is available in sizes SV14K, SV20K and SV30K.

SolarVenti SV20K model for basements - Complete system with 1.98 m2 surface, for basements up to 70 m², including wall mounting kit and electronic regulator with room thermostat, speed regulator for the fan and on / off. The air outlet connection: Ø125 mm. Solar cell and fan mounted on the back of the collector. The model for Basements SolarVenti® (SVK) is a SolarVenti® (SV) model specially modified for use in the basement area with greater capacity of solar cell and the air outlet closer to the edge. The model is available in sizes SV14K, SV20K and SV30K.

This kit is to remove the moist air in winter, to extract warm air in summer, or to ventilate with cool air from the north in summer. The kit is supplied with 6W solar cell and the system is 12V and has no running costs because it is completely powered by the sun.

For connecting to SolarVeti regulator. This kit is to remove the moist air in winter, to extract warm air in summer, or to ventilate with cool air from the north in summer. The kit is for 12V and has no running costs as it connects so an SolarVenti panel that is completely powered by the sun.

FREE POOL HEATING WITH SOLARVENTI SOLAR COLLECTORS. Enquiries for pool heating systems require direct contact with SolarVenti. Pool owners like to use their pool as long as possible. But for many, the economy puts a limit because it is very expensive to heat the pool at a reasonable temperature for bathing with traditional energy. A pool of 32 m2 can easily cost more than 2,000 € for heating in a single season. The price for heating make it a problem for many homeowners who want to maintain a temperature suitable for use when desired.