Refine by
Hilliard Companies Equipment & Supplies
51 equipment items found
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO Hydraulic Clutch Assemblies provide high-torque engagement for industrial applications. Available in variable and fixed displacement types, they operate at pressures up to 5,000 psig (350 bar). Designed for high-speed operation, these assemblies feature SAE mounting and spline shafts, ensuring compatibility with open and closed-loop circuits. Ideal for marine, oil & gas, and power ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Hilliard Electric Brakes provide positive stopping and reliable holding of rotating devices on demand-every time. Spring engaged when current is interrupted and electromagnetically relased when voltage is applied, these brakes are designed for maximum flexibility and long, dependable service. Each brake has an easy-to-adjust wear bolt to compensate for friction service wear and extend the life of ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Operates on any pressurized gas (0-220 psig). Break-away torques up to 3,700 ft lb. Output speeds up to 12,000 RPM. For industrial gas turbine or reciprocating engines. Standard and custom interfaces available. Helical rotor design. Positive displacement. Roller-ramp overrunning clutch to pre-engage the starter to the turbine. Dynamically balanced, gas tight. Delivers rated torque at 0 ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard Front Drive System is an electro-mechanically activated bidirectional overrunning clutch. When 12 volts of power are sent via the 4WD switch, the unit is activated to engage both front wheels instantaneously, whenever the rear wheels lose traction. The clutch also releases or overruns automatically the instant the rear wheels regain traction. Because torque is transmitted to both ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard High-Speed Starter Overrunning Clutch Drive provides positive engagement and high torque on demand. Featuring a unique roller-ramp design, the clutch when engaged transmits power via the precision-machined cam and roller assembly connected to the input shaft. A ball bearing at each end of the roll cage supports and aligns the cam in relation to the drive (output) ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard MK4800 is an electromagnetic, fail safe caliper brake. Spring applied, electric released, it is suitable for holding duty and emergency for applications such as heavy duty lift operations, conveyors, elevators and cranes. Alternative mounting arrangement: pin mounting, base mounting horizontal and base mounting angle. The MK4800 is capable of producing a maximum 4,800 LBF of braking ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Flame clutch includes all of the design advantages of the Fury but also includes several additional features. The clutch is fully tunable with optional weights. The optional weights alow the racer to make small adjustments to the engaging speed for optimal performance. The shoes have been designed to reduce chatter and provide smoother engagement over the Fury clutch. The shoes are lighter ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard BBH1 Power Unit is a base model that includes on/off and ramped braking modes. With integral manifold mounting and heavy duty pump with fail-safe design, many options are available to customize the system to the specific needs of the ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc diameter of 12" and is offered in 4 sizes to accommodate a ½", 1", 1-3/16", and 1-1/2" thick ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard M300 brake caliper is a hydraulic applied, spring retracted brake caliper for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications and has been designed for use in many different extreme environments. The M300 brake caliper is capable of producing a maximum 10,600 LBF (47 kN) of braking force at 1600 PSI (110 Bar) and has been designed for ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Inferno Fury is an economical racing clutch designed for durability. The sprockets are heat treated steel and the hub is heat treated. The Fury is available with an oil impregnated bronze bushing, or a needle bearing. The Fury is a long lasting low maintenance design with some tunability. The Fury clutch can handle excessive heat and give you consistent torque all race season. The Fury clutch ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard M900SH brake caliper is a floating spring applied, hydraulically released brake for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications and has been designed for use in many different extreme environments. The M900SH is capable of producing 170,000 LBF (750 kN) of braking force. The floating design can accommodate up to 1 inch of axial ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The H3 Power Unit is Hilliard's most advanced brake control system. With a PID Loop Control, the BBH3 Power Unit is capable of monitoring speed. The Hilliard BBH2 Power Unit incorporates an engineered hydraulic circuit to control the brake torque during a typical stop. Large capacity hydraulic accumulators provide additional volume for precise control of brake pressure. Equipped with manual ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard Auto-Lok Differential offers equal power transferred to both wheels on an axle regardless of traction, allowing positive back drive through both wheels. The self- contained unit locks and unlocks automatically providing the benefits of both an open and locked differential, depending on the ground conditions. Benefits include improved traction and easier operation and ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO Six-Port Standard Transfer Valves provide precise, multi-path fluid routing in industrial systems. Available in same-side or opposite-side six-port layouts, they employ spring- and pressure-loaded sealing pads (not plugs) for tight leak control. Built from heavy-wall steel or stainless tubing for durability, they offer low torque, low pressure drop, and simple top/bottom ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO Fuel Gas Strainers are custom-engineered duplex or simplex basket strainers built from wrought materials—not castings—for superior flexibility and serviceability. Designed to ASME Code standards, they accommodate mesh-lined or perforated baskets and offer options like internal bypass, differential pressure gauges, and varied material constructions to fit oil & gas, power ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Hilliard supplies standard and custom brake caliper mounting kits and brackets for use with all Hilliard brake models. Fabricated of welded steel construction with painted finish, Hilliard mounting bracket models are available to accommodate from one to eight calipers per disc. Hilliard can also supply non-standard disc and hub sizes to meet your specific applications. ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard MK750 is an electromagnetic, fail safe caliper brake. Spring applied, electric released, it is suitable for holding duty and emergency for applications such as conveyors, elevators and cranes. Alternative mounting arrangement: pin mounting, base mounting horizontal and base mounting ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc diameter of 12" and is offered in 4 sizes to accommodate a ½", 1", 1-3/16", and 1-1/2" thick ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The patented Hilliard Extreme Duty Centrifugal Clutch has been engineered in pulley and sprocket versions to provide long service life and is ideal for retrofit or new equipment applications. A thermodynamically designed clutch shoe increases the clutch's capacity to absorb heat without damaging the integrity of the ...