Sterling Thermal Technology Limited products

Air-cooled gas coolers to remove excess heat from a gas stream. Excess heat from a gas stream is lost to the atmosphere while the gas product is cooled close to ambient temperatures. Air-cooled gas coolers are used to remove this excess heat. Air-cooled gas coolers are used for a range of applications. These include CO2 cooling in refrigeration systems, also inter-cooling and after-cooling of compressor gas streams

Air coolers to cool the air intake of your process. Air is used as an integral part of process arrangements. The temperature of the air supplied must be carefully controlled to optimise the efficiency of a process. We can cool your airstream to do so.

Avantair is a high-performance cooling solution that uses heat pipes (also known as thermosyphons) to transfer energy from a generator to the surrounding environment using forced air movement and an extended finned surface.

Charge air coolers to improve the volumetric efficiency of engines, Charge air coolers reduce the air temperature as it enters the engine to improve the volumetric efficiency. It’s located between the turbocharger or supercharger and the engine inlet. The equipment is cooled by water and uses finned tubes to remove heat from the combustion air flow.

Air-cooled condensers are heat exchangers that take a process stream in gaseous form, cool it below its dewpoint and discharge a stream with the majority of the material in liquid form. Multiple axial flow fans are generally used to supply the cooling ambient air. The medium being cooled is dependent on the process being considered. Most of the applications are in petrochemical, power generation, and refrigeration.

Air blast coolers, the workhorses of the industry for cooling of process fluids. Our air blast coolers are part of our wide range of custom design and build watercoolers for industrial use. An air blast cooler is an extended surface heat exchanger using ambient air to cool process fluids. We produce coolers from small products for ships stabiliser gear to units of more than 6 meters in length and weighing several tons.

Air preheaters take energy from a process stream to heat incoming air to a system. This operation increases the inlet temperature of the air to the process thus improves the overall efficiency of the system. Air preheaters may be configured as gas to air or liquid to air, depending on the available process streams.

Bearing oil coolers sit within the bearing housing removing heat directly from the oil sat in the oil sump. The shape of the oil sump depends on the machine orientation and operating parameters. As a result, the geometry of the cooler varies widely from one application to the next. Cooling of a bearing on a vertical shaft may require a circular array of tubes to sit around the outside of the bearing while other arrangements may need a set of small cooling clusters in the bottom of the housing.