Thermobile UK Ltd products

Durable phosphated body parts with powder coating. Very mobile, economic in use, reliable. Safe cool outside housing. Tank for 16 hours burning duration. Exchangeable components. High pressure pump with 1-way pipe system. Conversion kit to 2-way pipe system available for connection to bulk tank (max. length 50 m/height 3 m, depends on diameter of pipe). Room ventilation is required. TA models with burner relay, photocell flame control and thermostat connection. Air wheels for TA 16/22/30/40/80 available as accessory. TA 40 (TH) and TA 80 (TH) models are standard equipped with a level meter. TA 40 TH and TH 80 TH are standard equipped with tank heating.

Direct heat with 100% efficiency. Fixed outlet temperature approx.100-130 °C. Large air throw. Clean burner because of fresh air connection. Fan for optimum combustion air.

Direct heat with 100% efficiency. Fixed outlet temperature circa 60-100 °C. Large air throw. Clean burner because of fresh air connection. Fan for optimum combustion air. High pressure pump for diesel or paraffin.

All GA models with burner relay, ionization flame protection, thermostat connector and hose breakage protection. Clean combustion, easy to maintain. High capacity for low price. Wheels GA 60/85 E available as an accessory. Wheels GA 110 E are standard. Full humidity and dust proof control panel. (Except GA 25 E). Removable exterior cover for service. Gas valves with built-in filter. Twin gas valves for safety. KIWA-CE certified. Room ventilation is required. GA 25 is not suitable for stables. GA models (except the GA 25 E) can both blow horizontally and vertically (up or down) near a drying system.

Transport frame available on request. With overheating protection and temperature limitation of warm air. The fan stops at temperatures below 40 °C and does not ventilate cold air when starting up. (Constant ventilation is possible with an extra switch position). Fully automatic, controllable with thermostat connection. Tigerloop standard, fuel filter with condensate separator.

Odourless without air flow. Fixed radiation temperature circa 150 °C at 70 cm (20 °C at 3 m). Spot heating (and limited space heating).

Multi fuel capability. Automatic burner with fuel pre-heating.  Room thermostat for economical operation. Fast and simple installation.  Minimum service and maintenance. Clean, soot free combustion. High efficiency. Heater includes `day` tank, pump and controls.

The AV306 and AT306TI irRMO are recommended only for workshops where no explosive vapours are present. Model AT306 produces radian! heat only, whilst the AT306TIJFRMO produces a combination of radiant heat plus hot air from the top mounted`thermo` blower.

Equipped with a high pressure pump for diesel or paraffin with a 1-way pipe system. (Conversion to a 2-way pipe system for connection with separate fuel tank available as an option). All models are equipped with burner relay, photocell flame control and thermostat connection.

Equipped with a high pressure pump for diesel or paraffin with a 1-way pipe system (conversion to a 2-way pipe system for connection with separate fuel tank available). Outlet temperature with ΔT of about 50°C. High efficiency heat exchanger (91% Min). The ITA Robust version is supplied with a very robust bumper, large ball bearing wheels, forklift slots and tank heating.