Xinda Green Energy Co.Limited products

It is applicable under low head conditions from 1.5 meters to 18meters with large flow. This new type of machine has solved the problem that ordinary axial flow generator has long main shaft and the bearings at the impeller must be immersed into water and thus cause easy damage; The open channel of the volute chamber can not utilize the water head pressure; Work amount is large, installation period is long and cost is high; Fabrication of the volute chamber and the tail pipe is hard to reach requirements of standards etc. Volute axial flow machine is a consummate type and its efficiency and endurance are several times higher than that of ordinary axial machines.

A wind turbine, which is installed on top of a tall tower, collects kinetic energy from the wind and converts it to electricity that is compatible with a home`s electrical system. In a normal residential application, a home is served simultaneously by the wind turbine and a local utility. If the wind speeds are below cut-in speed (7-10 mph) there will be no output from the turbine and all of the needed power is purchased from the utility. As wind speeds increase, turbine output increases and the amount of power purchased from the utility is proportionately decreased.

Type SD/SDC Series Generating-welding set is best driver by an internal combustion engine. They thus form a mobile or stationary power supplying unit which is suited to be used in towns, countrysides, forests, construction sites or on boats for lighting, household appliance, power tools and welding. This machine can serve for either power generating or electric welding individually, and for both welding and a small scale illumination simultaneously.