Refine by
Hilliard Companies Equipment & Supplies
51 equipment items found
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Operates on any pressurized gas (0-220 psig). Break-away torques up to 3,700 ft lb. Output speeds up to 12,000 RPM. For industrial gas turbine or reciprocating engines. Standard and custom interfaces available. Helical rotor design. Positive displacement. Roller-ramp overrunning clutch to pre-engage the starter to the turbine. Dynamically balanced, gas tight. Delivers rated torque at 0 ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Inferno Fury is an economical racing clutch designed for durability. The sprockets are heat treated steel and the hub is heat treated. The Fury is available with an oil impregnated bronze bushing, or a needle bearing. The Fury is a long lasting low maintenance design with some tunability. The Fury clutch can handle excessive heat and give you consistent torque all race season. The Fury clutch ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard MK750 is an electromagnetic, fail safe caliper brake. Spring applied, electric released, it is suitable for holding duty and emergency for applications such as conveyors, elevators and cranes. Alternative mounting arrangement: pin mounting, base mounting horizontal and base mounting ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard MK4800 is an electromagnetic, fail safe caliper brake. Spring applied, electric released, it is suitable for holding duty and emergency for applications such as heavy duty lift operations, conveyors, elevators and cranes. Alternative mounting arrangement: pin mounting, base mounting horizontal and base mounting angle. The MK4800 is capable of producing a maximum 4,800 LBF of braking ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Hilliard Electric Brakes provide positive stopping and reliable holding of rotating devices on demand-every time. Spring engaged when current is interrupted and electromagnetically relased when voltage is applied, these brakes are designed for maximum flexibility and long, dependable service. Each brake has an easy-to-adjust wear bolt to compensate for friction service wear and extend the life of ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO Lab Services offers expert fluid and filtration testing, including particle analysis, viscosity testing, multipass evaluations, and filter diagnostics. Our ISO 9001-certified lab supports custom trials and static discharge testing—backed by 100+ years of engineering know-how. Get reliable insights to boost system performance and extend equipment ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Torque limiters and couplings are designed to slip during a torque overload, while still transmitting the adjusted torque. They provide dependable solutions to the problems of torque control and overload protection in power transmission equipment. These clutches include one or more friction discs mounted on an inner hub, a single nut adjustment to easily pre-sets the torque. Similar static and ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc diameter of 12" and is offered in 4 sizes to accommodate a ½", 1", 1-3/16", and ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The A400 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The 400 requires a minimum disc diameter of 24" and is off ered in 2 sizes to accommodate a 1" and 1-1/2" thick disc. The design of ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard centrifugal clutch provides automatic, gradual, cushioned engagement over a speed range on high-inertia loads. It smooths out and reduces starting current surge. Centrifugal clutches are slip-free at rated load and speed. They protect against overload by limiting torque, absorbing shock and eliminating torsional resonance. Hilliard centrifugal clutches have soft transmission of power ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO Electric Start Assemblies deliver reliable 24 V DC starting power with solenoid-actuated Positork drives. Designed for SAE-3 mounting, they offer clockwise and counterclockwise rotation options and deliver up to 80 ft-lb torque. Engineered for rugged industrial use, these starters ensure smooth, dependable engine starts in marine, power generation, and oil & gas ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard MK350 is an electromagnetic, fail safe caliper brake. Spring applied, electric released, it is suitable for holding duty and emergency for applications such as conveyors, elevators and cranes. Alternative mounting arrangement: pin mounting, base mounting horizontal and base mounting angle. The MK350 is capable of producing a maximum 350 LBF of braking force with up to 210 VDC release ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard M900SH brake caliper is a floating spring applied, hydraulically released brake for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications and has been designed for use in many different extreme environments. The M900SH is capable of producing 170,000 LBF (750 kN) of braking force. The floating design can accommodate up to 1 inch of axial ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard Front Drive System is an electro-mechanically activated bidirectional overrunning clutch. When 12 volts of power are sent via the 4WD switch, the unit is activated to engage both front wheels instantaneously, whenever the rear wheels lose traction. The clutch also releases or overruns automatically the instant the rear wheels regain traction. Because torque is transmitted to both ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard M500SH/HR brake caliper is a spring applied, hydraulically released brake for use in heavy duty industrial applications. The brake comes standard with marine grade epoxy paint suitable for outdoor environments. The M500SH is available with standard force ratings. which when paired with the correct disc size produces an exact braking torque for the application. The caliper features ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc diameter of 12" and is offered in 4 sizes to accommodate a ½", 1", 1-3/16", and 1-1/2" thick ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc diameter of 12" and is off ered in 4 sizes to accommodate a ½", 1", 1-3/16", and 1-1/2" ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard M300 brake caliper is a hydraulic applied, spring retracted brake caliper for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications and has been designed for use in many different extreme environments. The M300 brake caliper is capable of producing a maximum 10,600 LBF (47 kN) of braking force at 1600 PSI (110 Bar) and has been designed for ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard M400HS brake caliper is a hydraulic applied, spring retracted brake caliper for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications and has been designed for use in many different extreme environments. The M400HS brake caliper is capable of producing a maximum 12,960 lbf (57.6 kN) of braking force at 1800 psi (124 bar) and has been ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard M400SH brake caliper is a spring applied, hydraulically released brake for use in heavy duty industrial applications. The brake comes standard with marine grade epoxy paint suitable for outdoor environments. The M400SH is available with standard force ratings which when paired with the correct disc size produces an exact braking torque for the application. The caliper features ...