2. bases_and_mounting

Range of Bases& Mounting AccessoriesF i r e D e t e c t o r s & M o n i t o r s? For more information pleaserefer to the relevant Apollopublication (where available).1. XP95 E-Z Fit BasePart number: 45681-250 (Approved byUnderwriters Laboratories inthe USA)The E-Z Fit base is an ultra low profile 61/4in(150mm) mounting base for XP95 and XP95Asmoke and heat detectors that can be fitted tomounting boxes up to 4in (100mm) in size.It offers a very high degree of protectionagainst unauthorised removal of detectors.The hinged covers, which conceal the screws,are locked into place by the detector, whichin turn is locked into the base with thestandard locking screw. ? PP20652. XP95 Intrinsically Safe BasePart number: 45681-215The I.S base is not identical to the XP95 standardbase. This ensures that standard detectorscannot inadvertently be fitted to an intrinsicallysafe system. Like the Series 60 I.S base, it isconsidered part of the detector and is printedwith the legend ‘PART OF BASEEFA CERTIFIEDDETECTOR.’ Use of any other base willinvalidate the approval. ? PP10953. XP95 Low Profile SounderPart number: 45681-261A loop-powered sounder, upon which anXP95 base and detector can be mounted.Activated by the control panel, the sounderhas an output of 85dB(A) at 1 metre with acurrent consumption of only 3mA. Thesounder may be operated in two modes,pulsed or continuous.This sounder is also available with either a redcap (part no. 55000-260) or a white cap (part no.55000-259) for use as a stand-alone sounder.? PP20314. XP95 Low Power Relay BasePart number: 45681-242The relay base incorporates a low power relay tocontrol field equipment such as automatic doorclosers. The base gives a set of voltage-freerelay contacts controlled by the remote outputof an XP95 detector and draws negligible current.? PP20435&8. XP95 BasePart number: 45681-21045681-361 (Black version)The base has been designed to enable thedetector to be fitted without the need for anyforce. Like the Series 60 base, it has a “oneway only” fit.By means of a unique, patented ‘XPERT card’,the address information is held in the basewhile keeping it entirely free from electronicparts. This coded plastic card is inserted intothe base, so that the address remains the sameif a detector is replaced, for example forservicing purposes. ? PP1039 or PP10401. XP95 E-Z FIT BASE ? 2. XP95 I.S. BASE ? 3. XP95 LOW PROFILE ? 4. XP95 LOW POWER ? 5. XP95 STANDARD BASE, ?? SOUNDER ? RELAY BASE ? BLACK ?All detectors can be locked intotheir bases using an Apollo 1.5mmhexagonal driver, part number:29600-095.All bases are supplied withinstallation instructions and wiringdiagrams as appropriate.All bases that include electronics areCE marked.Information in this guide is given ingood faith, but Apollo Fire DetectorsLtd cannot be held responsible forany omissions or errors. Thecompany reserves the right tochange specifications of products atany time and without prior notice.Fire Detectors & MonitorsRangeof Bases& Mounting Accessories6. XP95 Isolator BasePart number: 45681-211The base is designed to accept XP95 isolatorsonly. This ensures that XP95 detectors cannotbe fitted to isolator bases in error. The isolatorbase has only three terminals and an earthconnection. ? PP10397. XP95 20D Isolating BasePart number: 45681-321The isolating base senses and isolates shortcircuit faults on XP95 loops and spurs. Thebase is loop-powered, polarity sensitive andaccepts the XPERT card to set the associateddetector address.In short circuit conditions, the integral yellowLED is illuminated. The detector associatedwith the base remains active under short circuitconditions. Voltage sensing is continuous sothat power and signals to the affected sectionare restored automatically when the fault iscleared.Up to twenty devices (detectors and XP95interface units) may be installed betweenisolating bases provided that their total switchon surge current does not exceed 50mA at17.5 volts. ? PP2039 and PP10399. Series 60 Zener BasePart number: 45681-350Designed for use in systems that incorporatevoltage monitoring for detector head removalsensing. If a detector is removed, the zenerdiode clamps the supply line at 16-18V,depending on the load, so maintaining theoperation of manual call points. ? PP202210. Series 60 Marine BasePart number: 45681-200MAR(Note: when ordering the marine base, pleasebe sure to quote the full number, including thesuffix ‘MAR’)The base is designed for use with Series 60marine detectors and is distinguishable fromthe standard base by the addition of a varistor.The base is approved by Lloyds Register ofShipping, Germanischer Lloyd, AmericanBureau of Shipping, Det Norske Veritas,Bureau Veritas, and the Marine andCoastguard Agency. ? PP109911. Series 60 E-Z Fit BasePart number: 45681-251 (Approved byUnderwriters Laboratories in the USA)45681-252 (with flashing redLED) (UL approval pending)An ultra low profile 61/4in (150mm) mountingbase for Series 60 and Series 60A smoke andheat detectors which can be fitted to mountingboxes up to 4in (100mm) in size.The E-Z Fit base offers a very high degree ofprotection against unauthorised removal ofdetectors. The hinged covers, which concealthe mounting screws, are locked into place bythe detector, which in turn is locked into thebase by the standard locking screw.? PP20646. XP95 ISOLATOR BASE ? 7. XP95 ISOLATING BASE ? 8. XP95 STANDARD BASE ?9. SERIES 60 ZENER BASE ? 10. SERIES 60 MARINE BASE ? 11. SERIES 60 E-Z FIT BASE ?12. Series 60 BasePart number: 45681-20045681-200UL (Approved byUnderwriters Laboratories in the USA)The Series 60 base has been designed toenable detectors to be fitted without the needof force - particularly useful when fitting tosuspended ceilings. All Series 60 bases have a“one way only” fit.The detectors are polarity insensitive and thebases are easy to wire. All bases have an earthconnector and contain no electronic parts.Also used as a standard base for the Series 65range. ? PP1050 or PP104913. Series 60 Intrinsically Safe BasePart number: 45681-207The I.S base is designed for use with theSeries 60 I.S range of detectors. For certificationpurposes, the bases are considered part of thedetector and are marked with the legend ‘PARTOF BASEEFA CERTIFIED DETECTOR.’ Use ofany other base will invalidate the approval. ? PP202814. Series 60 Low Profile Relay BasePart number: 45681-360The relay base incorporates a single-pole voltage-free changeover (form C) contact for switchingancillary equipment. The contact rating is 50V1A (max).When the detector changes to the alarm state,the relay is energised, causing the contact tochange state. The contact will remain in thiscondition until the detector is reset.15. Series 60 Diode BasePart number: 45681-201The diode base is designed for use with con-ventional systems that have manual call pointsand detector bases on the same circuit andwhere correct functioning of call points isrequired even when one or more detectorheads have been removed. The base is fittedwith a schottky diode on the “L1 IN” and “L1OUT” wiring terminals. This base can only beused with compatible control equipment.16. Series 60 6” Relay BasePart number: 45681-227A large diameter base assembly comprising abackplate which is fixed to the ceiling, a standardbase and a ‘skirt’ to provide a visually pleasingfinish. The base contains a relay with two setsof voltage-free changeover contacts (form C)and may be used as a 2-wire or 4-wire base.This base is UL listed. 12. S60 STANDARD MOUNTING BASE ? 13. SERIES 60 I.S. BASE ? 14. SERIES 60 RELAY BASE ? 15. SERIES 60 DIODE BASE ? 16. SERIES 60 6" RELAY BASE ?? ?Note: Relay bases are not suitable for usein systems where it is specified orrequired that operation of the auxiliarysystem shall be fail safe.22. ALARMSENSE BASE ? 23. SERIES 65 RELAY BASE ? 24. ALARMSENSE SOUNDER ??17. Series 60/XP95 BackplatePart number: 45681-233An accessory which provides a high degree ofprotection against the ingress of water or dust intothe back of the detector mounted directly to amounting box. Holes are provided for fixingscrews; two knockouts cater for Europeanstandard fixing entries. When the backplate isused with an XP95 device, the number tab ofthe XPERT card must be snapped off andplaced in one of the knockout slots provided inthe backplate.18. Detector Base AdaptorsSeries 30 to Series 60 AdaptorPart Number: 45681-237Series 30 to Series 60 Adaptor I.S.Part Number: 45681-240Series 90 to XP95 Adaptor.Part Number: 45681-238Three base adaptors are available that allowSeries 60 or XP95 detectors to be fitted to existingSeries 30 or Series 90 systems. The adaptor anddetector become one unit which is inserted into theexisting base, eliminating the need for rewiring.19. Series 60/XP95 Conduit BoxPart number: 45681-204An inexpensive and versatile accessory for surfacemounting Apollo bases. The box has knockoutsto accept M16 or M20 cable glands, conduit ormini-trunking. The box is moulded in the same white poly-carbonate material as the bases and can beinstalled using either standard or plasterboardscrews. Self tapping screws are included to fitthe detector base to the conduit box.and alarm initiating circuits. Wherelocal codes allow, they may also beused in 2 and 4-wire circuits to providevolt-free control signals to auxiliary systemssuch as an automatic door closer.? PP205323. Series 65 Standard Relay BasePart number: 45681-245For use only with the Series 65 wide operatingvoltage range of detectors. The base providesone set of voltage-free, changeover (form C)contacts that change state when the detectorsignals an alarm. Also available:Series 65 Auxiliary Relay Base.Part number: 45681-246Series 65 EOL (end-of-line) Relay Base.Part number: 45681-247 for circuits with asupply voltage between 9 and 18 volts DCPart number: 45681-248 for circuits with asupply voltage between 16 and 33 volts DC.? PP205324. AlarmSense SounderPart number: 45681-259A sounder upon which an AlarmSense baseand detector can be mounted. The sounderhas four tones, selectable by a DIL switch andtwo volume settings 85dB and 92dB.Two stand alone variants are also available;part no. 55000-256 (red cover) and part no.55000-255 (white cover).AlarmSense sounders are designed for use onlywith AlarmSense® systems. ? PP206725. Series 65 BasePart number: 45681-200 (no photo)The Series 65 base is identical to the Series 60base and therefore has the samepart number. ? PP205320. Series 60 Module BasePart number: 38531-822A moulding that can be secured to a standardSeries 60 base to enable customer fitting ofadditional componentry. The base has a usefulinterior depth of 5mm with four studs to mounta PCB.21. Deckhead Mounting BoxPart number:29600-131 (PG16 cable entries - Aluminium)29600-139 (M20 cable entries - Aluminium)29600-196 (Polycarbonate moulding)The deckhead mounting box is a robust back box,made from either aluminium or polycarbonate, foruse with standard 100mm detector bases. Fixingpoints are external, enabling a seal to be maintainedand therefore providing protection againstingress of dust or water into the rear of the base.There are three pre-threaded cable entry ports,arranged as a ‘Y’ on the polycarbonate box (seeabove photo) and as a ‘T’on the aluminium boxes.These boxes are particularly useful when securingbases to rough surfaces or in areas where theremay be dripping water. ? PP204022. AlarmSense BasePart number: 45681-244AlarmSense is a range of conventional detectionand alarm products specially designed to beconnected to the same pair of wires. Themounting bases contains a PCB to detect detectorhead removal. AlarmSense® is not compatiblewith other ranges. ? PP2067Series 65 Relay BasesSeries 65 relay bases are for use with controlunits using 4-wire detector supply 17. SERIES 60/XP95 ? 18. BASE ADAPTOR ? 19. SERIES 60 & XP95 ? 20. SERIES 60 MODULE ? 21. DECKHEAD ?BACKPLATE ? ? CONDUIT BOX ? BASE ? MOUNTING BOX ?PP1089/2000/Issue 3Further information on Apollo detector ranges and the bases and accessories included inthis brochure is available. Please quote the relevant PP number when ordering. Allstandard literature is available from Apollo as well as our sister companies; ApolloGmbH and Air Products and Controls in the USA. (Addresses are given below)Product Range Publication Publication TypeNumberSeries 60 Range PP1049 General Sales BrochurePP1050 Engineering Product GuideSeries 60 E-Z-Fit Base PP2064 PIN SheetSeries 60 Marine Range PP1099 PIN SheetSeries 60 I.S Range PP2028 PIN SheetDeckhead Mounting Box PP2040 PIN SheetSeries 65 Range PP2053 General Sales BrochureSeries 60 Low Voltage Range (UK Only) PP2077 Sales LeafletAlarmSense Range PP2067 Sales LeafletXP95 Range PP1039 Engineering Product GuidePP1040 General Sales BrochureXP95 20D Isolating Base PP2039 PIN SheetXP95 Loop Powered Sounders PP2031 Sales LeafletXP95 Intrinsically Safe Range PP1095 Engineering Product GuideXP95 Low Power Relay Base PP2043 PIN SheetRDM Range PP2034 Engineering Product GuideAll PP2055 A Guide to the Care, Maintenanceand Servicing of Apollo ProductsDiscovery Range PP2029 Sales LeafletPP2052 Engineering Product GuideThe following literature is also available from our sister company Apollo GmbH.Series 60 Range PP1077 Sales Leaflet(German Language version) PP1079 Engineering Product GuideXP95 Range (German Language version) PP1078 Sales LeafletPP1086 Engineering Product GuideDiscovery Range PP2059 Sales Leaflet(German Language version)The following literature is also available from our sister company Air Products andControls Inc.Series 60A Range (UL listed products) PP1067 Engineering Product GuideXP95A Range (UL listed products) PP1068 Engineering Product GuideQuality Systems Certificate No 010Assessed to ISO 900136 Brookside Road, Havant, Hampshire PO9 1JR, England. Tel: +44 (0)23 9249 2412. Fax: +44 (0)23 9249 2754.Email: enquiries@apollo-fire.co.uk Website: www.apollo-fire.co.ukApollo GmbH, Gneisenaustr IIA, 33330 Gütersloh, Germany. Tel: +49 5241 33060. Fax: +49 5241 330629. Email: info@apollo-feuer.deAir Products and Controls Inc., 1749 E Highwood, Pontiac, MI 48340, USA. Tel: 001 248 332 3900. Fax: 001 248 332 8807 next page: previous: back to cover: print: