Alterna - Model QHP - Photovoltaic Modules Brochure

PHOTOVOLTAIC MODULESM A D E I N I T A L YENTHE FIRSTALTERNATINGCURRENTPHOTOVOLTAICMODULE125623430 mmØTested withhailTested at apressure of765kg/m27500 PaInvent Qhp Alterna is the first alternating current photovoltaic module.With Invent Qhp Alterna, you no longer need to prepare complicated technical spaces to install a photovoltaic system. You don’t need any other equipment in addition to the module because the work undertaken by the external inverter is now performed by the module itself.InVEnT Qhp ALTErnA: THE rEVOLUTIOn OF THE PHOTOVOLTAIC MODULEInnOVATIVE DESIgn With Qhp Alterna the PV module changes shape.The components are no longer visible, but are all contained within a single rear panel with special ventilation system and of a compact, linear design.The panel, which is made in standard sizes is now easy to handle and prevents components from breaking accidentally.Qhp ALTErnA QUALITYWArrAnTYPower is guaranteed: 97,5% the first year, the 12th year >/= 90%, the 25th year >/= 82% of the power.Invent grants a 12 year warranty for manufacturing defects and materials.Electronic parts are guaranteed for 20 years by substituting the faulty components.InDEPEnDEnT MODULES FOr MAxIMUM PErFOrMAnCEUnlike standard systems, each module in an Invent Qhp Alterna system is independent from each other. Thus, if one were to have a problem (shadow on the module, dirt or faulty modules) this would not cause a drop in the energy output of the entire system, but would limit its effect to the affected module only.Invent Qhp Alternaphotovoltaic systemOKStandard photovoltaic systemKOPErFOrMAnCE InCrEASEIn a PV system, Invent Qhp Alterna modules allow:• increased system performance up to 25%;• optimized system performance, even if modules are inclined or positioned differently;• system efficiency even with failing modules;• reduced installation space.QUICk COnnECTIOn PLUg&PLAYAn important characteristic of Alterna is a special quick plug&play connection.The electric connection of the modules has never been so easy and affordable.MOnITOrIngMonitoring operations becomes easy also, with each panel being checked individually (optional).They are provided with positive tolerance (only 0/+6%). This ensures that the module will in any case, produce the same or more than the declared one energy, with conseguent advantages for purchasers.Qhp panel consists of 60 polycrystalline silicon photovoltaic (class A) cells (1), which generate high power in each module. Cells are laminated between two layers of EVA (ethylene-vinyl acetate) (2). In addition, a polyester laminate (PYE) (3) guarantees an effective sealing of the module and long lived, creating a barrier to oxygen and moisture. The structure (4), is available in different oxidations, it is made of a solid aluminum alloy, stress-resistant, corrosion-resistant, and easy to fasten.The front part of the module consists of tempered solar glass 4mm thick (5), high light transmittance and it is treated with the procedure NanoClean (6). Each module is tested by a solar simulator that generates a flash of 1000W/m2 and quantifies its power.100%95%90%85%80%75%0252 3 4 6 7 8 9 11 12 13 14 16 17 18 19 21 22 23 2420151051Industry standardsInvent Qhp Alternayearspowerof energy90%12° year82%25° year97,5%1° year 8,4%plusPrismaticglass4mmhightrasmittanceTestedCC SideModule’s name Q250hp APower class Wp 250nominal tension Vmp 30,2nominal power A 8,27no load voltage Voc 37,6Short-circuit current A(Isc) 8,86Full load voltage V 1.000Short-corcuit current’s temperature coefficient a 4,60 m A/°Cno load voltage’s temperaturecoefficient ß - 0,132 V/°CPower’s temperature coefficient d - 1,021 W/°CPower tolerance 0/+6%Efficiency % 15,08nOCT °C 41,73AC SideElectronic conversion on board YesPlug&play connections YesMaximum output power Wp 238MPPT 1Values obtained under standard conditions: 1.000 W/m - 25°C - AM 1,5TECHnICAL DATADIMEnSIOnS (mm)?????????COMPACT TECHnOLOgYIn the Invent Qhp Alterna module all technology is compacted into a single fixed panel at the rear of the module.The panel contains the control and management systems with AC output.Weight: 24,5 kg nAnOCLEAn TrEATMEnTTo guarantee the high efficiency of the photovoltaic system among the years, the modules Invent are treated with a special nano-technologic procedure to keep the modules clean. Surfaces treated with NanoClean do not absorb neither water nor oil. The nanotechnologic treatment allows the surfaces to gather the dirt or the limescale facilitating the periodic cleaning. In the images the difference of water and limescale reaction on treated and untreated surfaces is visible. Limescale WaterUNTREATED UNTREATEDTREATED TREATEDNanoclean, when applied on the module’s surface, greately facilitates the module’s cleaning due to: • spherical shape of dirt on the surface• easy removal of limescale, soap, stains and dirt in general• reduction of cleaning efforts• less aggressive cleaners (neutral ph) are requiredTHE FIRSTALTERNATINGCURRENTPHOTOVOLTAICMODULEPowertollerance0/+6%Warranties until25 yearson powerNanocleanTreatmentElectronicconversions with integrated MPPT fireresistanceC classAmmoniatestSaltsprayTestedEN 61215 (2005) - 10.17hail resistance testice ball of 25mm launched at a speed of 23,0 m/s-1 directed to 11 points of impact. An impact of energy equal to that of a sphere of ice of 30mm diameter is also simulated.EN 61215 (2005) - 10.16Mechanical load testthe module is subjected to a pressure of 5400 Pa. In addition, Invent tests the modules at a pressure of 7500 Pa, thus guaranteeing greater panel strength.EN 61215 (2005) - 10.12Moisture and freezing testthe module is put into service with an ambient temperature of - 45°C and relative humidity of 85%.EN 61701 (2000)Salt spray testIEC 61215/61646, EN 61730-1, EN 61730-2, IEC 61701Ammonia testEN 61730-2 (2007) - MST 21Temperature test5 hours exposure to 1,000 WmEN 61215 (2005) - 10.11Thermal cycle test (50 and 200 cycles)50 and 200 cycles from – 40°C to +85°C with the supply current peakEN 61215 (2005) - 10.13Damp heat testthe module is put into operation with an ambient temperature of 85°C and relative humidity of 85%.IEC 61730-2:2004 anex 2, IEC 61730-2:2004 anex 20.12Test of resistance to fire class Cthe module passes the “burner test and the “pile of wood” test.Invent srlvia A. Volta, 54 - 30020 Noventa di Piave (Ve) - ItalyTel. +39.0421.307393 - Fax +39.0421.572963www.inventsrl.comsales@inventsrl.itCertifying authorities:Images and texts are for indicative purposes only. Invent preserves the right to change them for a propriate services and products update wuth no obbligation of notice.CErTIFICATIOnSInvent photovoltaic modules are certified according to the European standard IEC 61215 (Ed.2). Safety tests were performed according to CEI EN 61730 (Safety class II). In the laboratory the modules successfully pass all tests demonstrating high resistance to different types of stress. CreditsCertifying authorities: ISO 9001:2008BS OHSAS 18001:2007ISO 14001:2004Invent is a PV CYCLE’s memberCADEMIA01PHOTOVOLTAIC MODULESM A D E I N I T A L YKgC °Nh3THE FIRSTALTERNATINGCURRENTPHOTOVOLTAICMODULEENIn process of obtaining