Double Insulated Single Wires For The Interconnection Of PV Systems SolarVill PV1-F

Double insulateD single wire for the interconnection of PV systems:solarVillPV1-fapplication:SolarVill,is a PV cable for the interconnection of solar moduls, panel strings and inverters. PV1-F marking shows and guarantees you the up to date safety standards for PV plants according to the DKE requirements. Fixed installation or steady movement in free motion without tensile load Specially made for the outdoor installation with direct solar radiation or the installation in dry or wet locations Not to be used as buried cableassembly:Cross section(in mm2)Conductor (tinned copper)Outer diameter(in mm +/- 0.20mm)Copper weight (kg/km)Cable weight (app. kg/km)2.5 50x0.25 4.5 24.0 404.0 56x0.30 5.2 38.4 596.0 84x0.30 5.9 57.6 8110.0 80x0.40 6.9 96.0 12716.0 126x0.40 8.3 151.1 19325.0 196x0.40 9.6 234.0 28435.0 266x0.40 11.0 315.7 378features: Flame retardent and halogen-free No corrosive gases and low smoke density The material properties of insulation and jacket dispose of excellent resistance to weather and abrasion and are highly UV-proof The temperature range and weatherproof features allow the usage even in rough climate Very flexible construction for high mechanical load Easy stripping of insulation and jacket All materials are RoHS and REACH compliant Expected period of use is 25 yearsVDE-REG.-Nr. 8099According to the requirements for cablesfor PV systems of DKE available colours: black, red, blueKabelwerke Villingen gmbhKabelwerke Villingen gmbhAm Krebsgraben 3/1D-78048 Villingen -SchwenningenPhone: +49 (0)7721 / 206 17-0Fax: +49 (0)7721 / 206 17-90info@kwv-vs.dewww.kwv-vs.deKabelwerke Villingen gmbhAs at 01/2010technical properties: Conductor according to DIN EN 60 228 class 5 tinned Short-circuit proof up to 200°C/ 5s Hot set test at 250°C Deformation test up to 140°C Nominal Voltage [U0/U] AC 0.6/1.0 kV, DC 0.9/1.5 kV Test Voltage [online test] 8 kV Test Voltage AC 5 kV / 5h AC Voltage resistance [increase 2 kV / 5 min] > 30 kV Voltages up to 1.8 kV are possible (conductor/conductor, not grounded system, unloaded circuit) Insulation resistance at 20°C > 800 MOhmkm Insulation resistance at 90°C > 50 MOhmkm Long term aging behaviour 20,000 h at 120°C Sea water resitant Resistance to acid and lye Ozone resistant Temperatur range fixed: -50°C up to +150°C moved: -25°C up to +125°C Minimum bending radius fixed: 5 x diameter moved: 10 x diameter