DP1116A - Programmable DC Power Supply Datasheet

DP1308A: Separate Control and Independent Triple Outputs: +6V/5A, +25V/1A, -25V/1A, total 80W power. The +6V channel output is electrically isolated from ±25V channel output to minimize the interference between the circuits under test. Clean power with Low ripple noise: < 350 µVrms / 2 mVpp ±25V channels have output tracking functions The change of voltage value in one channel can be reflected in the other channel Supports up to 5 groups of timing settings Support Web controlDP1116A: Single output, dual ranges,160W power with the remote sense capability Clean power with Low ripple noise: < 350 µVrms / 3 mVpp Supports up to 100 groups of timing settings Provides the classical display mode: dial plates with pointer and V/A/W values Supports up to 100 groups of timing settings with finity or infinity repetitionDP1308A & DP1116A: 4.3 inch large True Color LCD Display with 480×272 high resolution: Displays multiple parameters and state graph simultaneously. Fast Transient Response Time: <50µs Overvoltage and overcurrent protection function Two-level over-temperature protection Store and recall system setups Real time V/A/W waveform display with V/A/W values On-line help, Chinese & English interface and input Comprehensive Connectivity and Remote Control Interface USB Device, USB Host, LAN, GPIB interfaces, support USB flash drive storage Comform to LXI-C Class instrument standard (version 1.2) Support SCPI commands for remote controlRIGOL TECHNOLOGIES, INC.DP1116A/DP1308AProgrammable DC Power SupplyNo.1DP1116A/DP1308A Programmable DC Power Supply Typical Applications Intuitive User Interface R&D lab General purpose testing Quality Assessment inspection Bias power for RF/MW circuits4.3 inch LCD DisplayMenu SoftkeyAadvanced Function AreaChannel SettingDisplay mode SwitchOutput TerminalUSB HostProduct Dimension: Width×Height×Depth=235 mm×155 mm×384 mm Weight: 8.5 kgObservable Clean Stable Reliable Affordable Automotive electronic test Production testing Device or circuit characterization and troubleshooting Teaching lab experimentsDisplays multiple parameters and state graph simultaneouslyDP1116A provides the classical display mode: dial plates with pointer and V/A/W valuesStore and recall system setups On-line helpDP1116A supports up to 100 groups of timing settingsReal time V/A/W waveform display with V/A/W values4.3 inch Large True Color TFT LCD DisplayClean power with Low ripple noiseExcellent Load and Line Regulation4.3 inch Large True Color TFT LCD DisplayClean power with Low ripple noiseExcellent Load and Line Regulation SpecificationsSpecifications are valid after 30 minute warm up time under specified temperature.ModelOutput Ranges/ChannelsDC Output ( 0? - 40?)VoltageCurrentOvervoltage ProtectionOvercurrent ProtectionDP1116A16 V/10 A0 to 16 V0 to 10 A0.1 V to 35.2 V0.1 A to 11 A< 0.01% + 2 mV< 0.01% + 250 µA< 350 µV rms/3 mVpp< 2 mA rms-Ripple and Noise (20 Hz - 20 MHz) < 0.005% + 250 µA < 0.01% + 250 µA< 0.01% + 2 mVVoltageCurrentVoltageCurrentNormal Mode VoltageNormal Mode CurrentCommon Mode Current0 to 32 V0 to 5 A0 to +6V0 to 5 A0.1 V to 6.5 V0.1 A to 5.5 A< 350 µV rms/2 mVpp<1.5 µA rms< 2 mA rms <500 µA rms0 to +25 V0 to 1 A0.1 V to 27 V0.1 A to 1.2 A0 to -25 V0 to 1 A-0.1 V to -27 V0.1 A to 1.2 A32 V/5 A +6 V +25 V -25 VDP1308AAccuracy 12 Months[1] (25?±5?)±(output percentage + offset)Transient Response Time Less than 50 µs is spent on recovering the voltage within 15 mV during the output current changes from full load to half load or half to full.Sense (only for DP1116A)Voltage drop: Up to 1V per each leadCommand Processing Time[2]< 50 msResolution ProgrammingRead BackMeterProgrammingRead BackVoltageCurrentVoltageCurrentFull LoadNo LoadFull LoadNo LoadVoltageCurrentVoltageCurrentRisingFallingAccuracy± (output percentage + offset)Activation Time0.05% + 10 mV0.2% + 10 mA0.05% + 5 mV0.15% + 5 mA1 mV/1 mA1 mV/1 mA1 mV/1 mA0.01% + 3 mV0.02% + 3 mA0.02% + 1 mV0.1% + 1 mA50 ms20 ms45 ms400 ms0.5% + 0.5V/0.5% + 0.5 A1.5 ms(OVP = 3 V); < 10 ms(OVP < 3 V)< 10 ms(OCP)235 mm (W) x 155 mm (H) x 384 mm (D)100 Vac ± 10%, 115 Vac ± 10%, 220 Vac ± 10%, 230 Vac ± 10% (250 Vac Max)Full rated value output: 0? - 40?At higher temperature: the output current falls into 50% at the maximum temperature 55?Fan coolingCE, cTUVus11 kg 8.5 kg11 ms10 ms13 ms200 ms50 ms45 ms20 ms400 ms0.5 mV/0.5 mA0.5 mV/0.5 mA1 mV/1 mA0.01% + 2 mV0.02% + 3 mA0.03% + 1 mV0.1% + 3 mA0.01% + 3 mV0.01% + 0.5 mA0.02% + 2 mV0.05% + 1 mA1.5 mV/0.1 mA1.5 mV/0.1 mA10 mV/1 mA0.1% + 5 mV0.2% + 10 mA0.1% + 5 mV0.2% + 10 mA0.05% + 20 mV0.15% + 4 mA0.05% + 10 mV0.15% + 4 mAStability[3], ±(output percentage + offset)Voltage Programming Speed(to within 1% of total variation range)OVP/OCPRemarks:[1] Specifications are for one hour warm-up and at 25?.[2] The maximum time required for regulating corresponding output when received APPLy and SOURce commands.[3] The variation of output within 8 hours after warm-up 30 minutes and both the load circuit and environment temperature are in constant conditions.EnvironmentWorking TemperatureCooling MethodProduct RegulationMachineDimensionWeightPower SupplyAC Input(50 Hz - 60 Hz)Temperature Coefficient per ? (output percentage + offset)Load Regulation± (output percentage + offset)Line Regulation± (output percentage + offset)DescriptionProgrammable DC Power (Single Channel)Programmable DC Power (Triple-Channel)A Power cordA USB data cable Two shorted devices (only for DP1116A)A CD (including User’s Guide and Programming Guide)Four fuses (two of 250 V/T2.5 A and two of 250 V/T4 A): DP1116AFour fuses (two of 250 V/T3 A and two of 250 V/T2 A): DP1308ARack Mount Kit An INSTRUCTION ModelStandardAccessoriesOrder NumberDP1116ADP1308AFor further information, please contact RIGOL local distributors.March, 2011RM-DP-1 Ordering Information