Fluidized Bed Coolers / Dryers

Hansaring 25/27 D - 50670 Köln Telefon: (+49) 221 – 7 12 41 33 Telefax: (+49) 221 – 7 12 41 55 E-Mail: info@enviro-engineering.de Internet:www.enviro-engineering.de Fluidized Bed Coolers / Dryers The most important qualities of Fluidized Bed Coolers / Dryers are their high heat transfer coefficient (>180W/m²K) and the equal cooling / drying result. Our fluidized bed coolers are working continuously and are fed by example by rotary valves or screw conveyers. The instal-lation height is smaller than this of comparable stiff coolers. By patended air nozzles the com-plete content of the cooler is fluidized very equally. It is also possible to add other materials without problems. With the help of a patended separator oversize particles are separated with a high efficiency and security already before entering the dryer. On page three (3) the total view of a fluidized bed cooler is shown. Field of Operation: - Cooling of sand in casting industry - Cooling of solids in chemical industry - Drying of solids in chemical industry - Fluid bed reactor in environmental industry Dimensions: Deliverable types and dimensions are shown in view 2, enclosed table demonstrates the per-formance of this coolers for the cooling of used sand in casting plants.