GC2 Series Self-Powered LCD Totalizer Manual

1) Remove the terminal block from the main unit. (except wide range voltage input type)2) Use a flat screwdriver or any appropriate tool to lift the groove in order to disconnect the 'front and back' case hooks.3) Pull out the back case from the main body.4) Replace with a new battery making sure that the positive and negative terminals of the battery are positioned correctly.5) Replace the back case to the main body. Make sure that the case hooks click properly in place.*Please use 3.6V 1/2AA Lithium Battery only for this unit.1 3 4 52 21 4 53This unit uses Lithium battery, it must be disposed properly after use.Do not short the positive and negative terminals, recharge, disassemble, deform by the application of excessive pressure, or dispose the battery to fire as this may seriously damage it or may cause explosion.WARNINGEXPLOSIVE1. Please install the unit in the correct panel cut-out size.2. A gasket is included with the unit. Insert the gasket in the unit before inserting it in the panel.3. Insert the mounting clip to the back of the unit.4. Push the mounting clip until it locks the unit tightly against the panel.Wir ingSwitch/Open Col lector Input Input ResetGNDGNDWide Range Vol tage Input TypeInput ResetGNDGNDVccVccMount ingMount ing Cl ipGasketPanelBattery ReplacementPrecautions when replacing the battery:- Disconnect the wiring before changing the battery. Do not touch areas subject to high voltages, this could result to an electric shock.- Make sure that your body is free from static electricity before changing the battery.- Make sure to follow carefully the procedures described below.ATTENTIONThank you for purchasing this Line Seiki product.Please read this instruction manual carefully before using to ensure correct usage of this product.Please keep this instruction manual for future reference.GC2/GH2/GM2/GS2 SeriesG 21 4 52 34.8Please note that misuse of this device may lead to injury to the user or damage to the device.WARNINGPanel mount(50.0x25.0mm)6 / 8 digits LCD displayLithium battery includedBattery life 7 yearsIP54 Front Panel protection levelIn conformance to CE (EMC),Main FeaturesI n s t r u c t i o n M a n u a lCustomer ServiceModelsSpeci f icat ions0: Terminal Block0: Switch/Open Collector Input1: Wide Range Voltage Input0: Remote1: Remote & Front6: 6 Digits8: 8 Digits (GC2 only)DimensionsDigit Dimension10.66 Digit8 Digit3.810.65443.212.610.22950 +0.7+025 +0.7+03.5 38.3 6.5Switch/Open Collector Input TypeWide Range Voltage Input Type3.5 38.3 11 Terminal No.49.824.849.824.8Terminal No.1 4 52 3LINE SEIKI CO., LTD.37-7 Chuo-cho, 2-ChomeMeguro-ku, Tokyo 152-0001 JapanTel: +81-3-37165151 Fax: +81-3-37104552webtrade@line.co.jphttp://www.lineseiki.comAddress:Contact :E-mail :Web : Panel Cut DimensionWiringInputResetDisplayC: TotalizerH: HourmeterM: MinutemeterDISPLAY DIGITSwitch/Open Collector L: < 0.8V Sink Current: 8uAWide Range Voltage L:DC/AC 0~10V Input Impedance: 300kW H:DC/AC 20~250VRESOLUTIONFront ResetRemote Reset Switch/Open Collector L: < 0.8V Sink Current: 8uAWide Range Voltage L:DC/AC 0~10V Input Impedance: 300kW H:DC/AC 20~250VRESET PULSEWIDTHPOWERElectrostatic Discharge: IEC-61000-4-2 8kVElectromagnetic Field: IEC-61000-4-3 10V/mEFT/BI/O Leads: IEC-61000-4-4 1.0kVEMC STANDARDOPERATING TEMPERATURESTORAGE TEMPERATUREOPERATING HUMIDITY Operation : Double Amplitude 0.3mm, Frequency: 10~55Hz, X, Y, Z Axis (3 Axis)/100m/s² Storage : Double Amplitude 0.75mm, Frequency: 10~55Hz, X, Y, Z Axis (3 Axis)/300m/s²PROTECTIONWEIGHT WIRINGCOMPLIANCEIP54» 60g (Battery included)14-22 AWG Leadwires by Terminal ScrewRoHS, UL 863, CE-10 ~ +55°C (non-freezing)-20 ~ 65°C (non-freezing)25 ~ 85% RH (non-condensing)VIBRATION/SHOCK RESISTANCENOISE IMMUNITYEMI: EN50081-2 EMS: EN50082-26ms minimum3.6V 1/2AA Lithium Battery (Inside), 7 years (replaceable)1 count per 1/10 minute 1 count per 1/10 second1 count per 1/10 hourINPUTCOUNT SPEED 30 Hz 20Hz (Wide Range Voltage Input Only) RESETGC2 TOTALIZER6/8 Digits, 7-Segment LCD 10.6mm (H)0~999999/0~99999999GH2 HOURMETER6 Digits, 7-Segment LCD 10.6mm (H)0.0~99999.9TYPEDISPLAYGM2 MINUTEMETER GS2 SECONDMETERS: SecondmeterRoHS and UL 863 TypeThis manual was last revised 2006. 4GX2001A *Subject to change without prior notice. All Rights Reserved,Copyright © 2006,LINE SEIKI CO.,LTD.