Grid-Tied Inverter 2500xi - 5000xi(2.5KVA~5kVA)

P V I N V E R T E R SKACO blueplanet 1501xi grid-tied inverterMADE IN GERMANY for over 60 yearsNEMA 3R enclosure for all applications“Best in Class” CEC efficiency rating Easy to read LCD displayGFDI ground fault protectionBiSi grid monitoring (anti-islanding)easyInstall installationeasyLink data interfaceeasySwap 10 year warranty •••••••••tested to UL 1741Model number blueplanet 1501xiDC – input dataMax. DC power 1.8 kWpMPP range 125 - 300 VdcMax. DC input voltage 400 VdcMax. array short circuit current 15 AdcAC – output dataCEC continuous AC output @ 40°C 1500 WUL continuous AC output @ 25°C 1500 WMax. utility backfeed current 0 AacMax. overcurrent protection 15 AacAC operating voltage range 211 – 264 VFrequency 59.3 – 60.5 HzCEC rated efficiency 94%General dataGrid monitoring BISI in accordance with UL 1741Wiring concept Electrically isolated DC/DC converter with downstream inverterIslanding protection Active anti islandingSafety compliance UL 1741, IEEE 929 & 519, NEC 690DC reverse polarity protection YESGround fault protection YES - internal GFDITemperature protection YES - power de-rating and emergency shut downVisual displays Backlit LCD display 2x16 charactersAccessory interfaces RS232 / RS485 with easyLink - Optional So interface for large displaysConnections AC & DC connection with clampsAmbient operating temperature -5°F - +149°F -20°C - + 65°CCooling Ultimate reliability - True convection Enclosure type NEMA 3R / IP 54 SpecificationsDimensions 17 3/4” x 13 3/8” x 7 7/8”Weight 30.8 lbsPower Consumption Night - 0W, Standby < 5WP V I N V E R T E R SDistributed by:KACO blueplanet 1501xi grid-tied inverterSpecifications are subject to change without notice. KACO blue planet 1501xi 02/04/09 1004B O’Reilly Ave., The Presidio, San Francisco, CA 94129 • T: +1 (866) KACO SOLAR F: +1 (415) 931 1688 • info@kacosolar.com www.kacosolar.comKACO’s electrically isolated inverters meet all the expectations you place on top-quality, modern inverters: easy to use, innovative technology, maximum efficiency and durability are all features of our grid-tie inverters. At KACO “Made in Germany” are not just empty words. All processes from development to production take place in Germany. KACO has been producing power supplies of all kinds for over 60 years. Our decades of experience are the basis for the successful blueplanet inverter series. Our easyInstall system makes installation of the inverters extremely simple with our innovative, lightweight and easy mounting bracket. Cables are connected directly inside the inverter with screw clamps. The inverter’s hinged housing door allows easy access to all PV terminals to ensure our easyInstall promise. In addition, KACO grid tie inverters are light enough for a single person to install.When choosing accessories to connect to your blueplanet inverter, the easyLink interface system lets you choose between the various connection ports with ease. You can select which interface protocol, RS232 or RS485, should be used so no extra communication card is needed. The new design integrates these new features in an appealing way, while adding a very high end look and feel. With a NEMA 3R / IP54 enclosure the device is suitable to install in harsh conditions. KACO also makes no compromises when it comes to warranties and service. The 10 year easySwap warranty is the simplest of its kind which means we offer a no hassle return policy. Simply call us and we’ll swap your damaged or defective inverter with a functional unit.Printed on 100% post consumer material P V I N V E R T E R SKACO blueplanet 2901xi grid-tied inverterMADE IN GERMANY for over 60 yearsNEMA 3R enclosure for all applications Easy to read LCD displayGFDI ground fault protectionBiSi grid monitoring (anti-islanding)easyInstall installationeasyLink data interfaceeasySwap 10 year warranty ••••••••tested to UL 1741Model number blueplanet 2901xiDC – input dataMax. DC power 3.8 kWpMPP range 125 - 300 VdcMax. DC input voltage 400 VdcMax. array short circuit current 33 AdcAC – output dataCEC continuous AC output @ 40°C 2900 WUL continuous AC output @ 25°C 3100 WMax. utility backfeed current 0 AacMax. overcurrent protection 20AacAC operating voltage range 211 – 264 VFrequency 59.3 – 60.5 HzCEC rated efficiency 94%General dataGrid monitoring BISI in accordance with UL 1741Wiring concept Electrically isolated DC/DC converter with downstream inverterIslanding protection Active anti islandingSafety compliance UL 1741, IEEE 929 & 519, NEC 690DC reverse polarity protection YESGround fault protection YES - internal GFDITemperature protection YES - power de-rating and emergency shut downVisual displays Backlit LCD display 2x16 charactersAccessory interfaces RS232 / RS485 with easyLink - Optional So interface for large displaysConnections AC & DC connection with clampsAmbient operating temperature -5°F - +149°F -20°C - + 65°CCooling Ultimate reliability - True convection Enclosure type NEMA 3R / IP 54 SpecificationsDimensions 19 5/8” x 13 3/8” x 8 3/8”Weight 52.7 lbsPower Consumption Night - 0W, Standby < 5WP V I N V E R T E R SDistributed by:Specifications are subject to change without notice. KACO blue planet 2901xi 02/04/09 KACO blueplanet 2901xi grid-tied inverterKACO’s electrically isolated inverters meet all the expectations you place on top-quality, modern inverters: easy to use, innovative technology, maximum efficiency and durability are all features of our grid-tie inverters. At KACO “Made in Germany” are not just empty words. All processes from development to production take place in Germany. KACO has been producing power supplies of all kinds for over 60 years. Our decades of experience are the basis for the successful blueplanet inverter series. Our easyInstall system makes installation of the inverters extremely simple with our innovative, lightweight and easy mounting bracket. Cables are connected directly inside the inverter with screw clamps. The inverter’s hinged housing door allows easy access to all PV terminals to ensure our easyInstall promise. In addition, KACO grid tie inverters are light enough for a single person to install.When choosing accessories to connect to your blueplanet inverter, the easyLink interface system lets you choose between the various connection ports with ease. You can select which interface protocol, RS232 or RS485, should be used so no extra communication card is needed. The new design integrates these new features in an appealing way, while adding a very high end look and feel. With a NEMA 3R / IP54 enclosure the device is suitable to install in harsh conditions. KACO also makes no compromises when it comes to warranties and service. The 10 year easySwap warranty is the simplest of its kind which means we offer a no hassle return policy. Simply call us and we’ll swap your damaged or defective inverter with a functional unit.Printed on 100% post consumer material 1004B O’Reilly Ave., The Presidio, San Francisco, CA 94129 • T: +1 (866) KACO SOLAR F: +1 (415) 931 1688 • info@kacosolar.com www.kacosolar.comP V I N V E R T E R SKACO blueplanet 3601xi grid-tied inverterMADE IN GERMANY for over 60 yearsNEMA 3R enclosure for all applications Easy to read LCD displayGFDI ground fault protectionBiSi grid monitoring (anti-islanding)easyInstall installationeasyLink data interfaceeasySwap 10 year warranty ••••••••tested to UL 1741Model number blueplanet 3601xiDC – input dataMax. DC power 4.8 kWpMPP range 125 - 300 VdcMax. DC input voltage 400 VdcMax. array short circuit current 48 AdcAC – output dataCEC continuous AC output @ 40°C 3600 WUL continuous AC output @ 25°C 3900 WMax. utility backfeed current 0 AacMax. overcurrent protection 30 AacAC operating voltage range 211 – 264 VFrequency 59.3 – 60.5 HzCEC rated efficiency 93.5%General dataGrid monitoring BISI in accordance with UL 1741Wiring concept Electrically isolated DC/DC converter with downstream inverterIslanding protection Active anti islandingSafety compliance UL 1741, IEEE 929 & 519, NEC 690DC reverse polarity protection YESGround fault protection YES - internal GFDITemperature protection YES - power de-rating and emergency shut downVisual displays Backlit LCD display 2x16 charactersAccessory interfaces RS232 / RS485 with easyLink - Optional So interface for large displaysConnections AC & DC connection with clampsAmbient operating temperature -5°F - +149°F -20°C - + 65°CCooling Ultimate reliability - True convection Enclosure type NEMA 3R / IP 54 SpecificationsDimensions 25 5/8” x 13 3/8” x 8 3/8”Weight 65.7 lbsPower Consumption Night - 0W, Standby < 5WKACO blueplanet 3601xi grid-tied inverterP V I N V E R T E R SSpecifications are subject to change without notice. KACO blue planet 3601xi 02/04/09 Distributed by:KACO’s electrically isolated inverters meet all the expectations you place on top-quality, modern inverters: easy to use, innovative technology, maximum efficiency and durability are all features of our grid-tie inverters. At KACO “Made in Germany” are not just empty words. All processes from development to production take place in Germany. KACO has been producing power supplies of all kinds for over 60 years. Our decades of experience are the basis for the successful blueplanet inverter series. Our easyInstall system makes installation of the inverters extremely simple with our innovative, lightweight and easy mounting bracket. Cables are connected directly inside the inverter with screw clamps. The inverter’s hinged housing door allows easy access to all PV terminals to ensure our easyInstall promise. In addition, KACO grid tie inverters are light enough for a single person to install.When choosing accessories to connect to your blueplanet inverter, the easyLink interface system lets you choose between the various connection ports with ease. You can select which interface protocol, RS232 or RS485, should be used so no extra communication card is needed. The new design integrates these new features in an appealing way, while adding a very high end look and feel. With a NEMA 3R / IP54 enclosure the device is suitable to install in harsh conditions. KACO also makes no compromises when it comes to warranties and service. The 10 year easySwap warranty is the simplest of its kind which means we offer a no hassle return policy. Simply call us and we’ll swap your damaged or defective inverter with a functional unit.Printed on 100% post consumer material 1004B O’Reilly Ave., The Presidio, San Francisco, CA 94129 • T: +1 (866) KACO SOLAR F: +1 (415) 931 1688 • info@kacosolar.com www.kacosolar.com KACO1501xi KACO2901xi KACO3601xi