Hydraulically Elevated, Self-Leveling Generation V Positioner Specification- Brochure

Model WEHVH8 8000# Specifications US Customary Units SI UnitsTilt Angle 115 deg 2.0 radTilt Speed 54 deg per minute 0.94 rad per minuteMaximum Headstock Height 8'-0" 2440 mmMinimum Headstock Height 2'-11" 890 mmTilt Torque 180,000 in-lbs 20,337 N-mRating lbs @ 6" (152 mm) CG from vert. face of table 8,200 lbs 36,475 NRating lbs @ 12" (305 mm) CG from vert. face of table 6.216 lbs 27,650 NRating lbs @ 18" (457 mm) CG from vert. face of table 4,993 lbs 22,209 NRating lbs @ 24" (610 mm) CG from vert. face of table 4,172 lbs 18,557 NRating lbs @ 30" (762 mm) CG from vert. face of table 3,583 lbs 15,938 NRating lbs @ 36" (914 mm) CG from vert. face of table 3,140 lbs 13,967 NRotation Load Torque in/lbs at 2 rpm 100,000 in-lbs 11,298 N-mRating lbs@ 4" (102 mm) Eccentricity 25,000 lbs 111,205 NRating lbs@ 6" (152 mm) Eccentricity 16,660 lbs 74,107 NRating lbs@ 12" (305 mm) Eccentricity 8,330 lbs 37,053 NRating lbs@ 18" (457 mm) Eccentricity 5550 lbs 24,687 NRotation SpeedWithout multiplier option, Variable 0.17 rpm to 3.24 rpm 0.183 rpm to 3.529 rpmWith 3:1 multiplier option, Variable 0.06 rpm to 1.08 rpm 0.061 rpm to 1.176 rpmWith 5:1 multiplier option, Variable 0.03 rpm to 0.65 rpm 0.037 rpm to 0.706 rpmPower Requirements 8 amp, 480 volt, 3 phase, 60 hz Contact Team for alternate powerWeld current conduction 1000 amps w/rotary ground 1000 amps w/rotary groundTable Size 54" Diameter 1372 mm DiameterSpindle Ouside Diameter 5 1/4" 133 mmSpindle Inside Diameter 4" 101 mmMotor Power 5.0 HP 3.72 kWDynamic braking to control overspeed yes yesAdjustable accel and decel ramp yes yesForward and reverse rotation directon yes yesSpeed reference keypad yes yesPassword protected motor drive setup yes yesShipping Weight 6128 lbs 2780 kg