iFIX - Solar - PV Flatroof Mounting System Technical Datasheet

iFIX The Fast and Easy PV Flatroof Mounting System Technical Data Sheet Version August 30th, 2013 feif008.02 voestalpine Polynorm GmbH & Co. KG www.voestalpine.com/polynorm iFIX Technical Data Manufacturer contact: voestalpine Polynorm GmbH & Co. KG Hans Schwenk T. +49/7171/972-906 F. +49/7171/972-321 hans.schwenk@voestalpine.com www.voestalpine.com/polynorm Requirements Roof inclination maximum 5° Permissible roof skins: Bitumen, plastic foil, gravel. No permanent ponding water on the roof. Wind load zones 1 to 3 Snow load up to 5,4 kN/m2 Building height: up to 32 m Areaload 4,47 kg/m² inclusive protection mats and clamps, without PV and weighting Module direction horizontal Usable PV modules with frame Frame size: minimum 1.638 x 982 mm, maximum 1.675 x 1.000 mm, Height: 30 up to 51 mm Lower horizontal mounting flange required Grid dimension in row PV module length +10 mm (maximum 1.685 mm) To calculate length of row, add 400 mm for end sections. Grid dimension between rows 1.590 mm at 16° shading angle 1.519 mm at 18° shading angle Height maximum 231 mm (without PV module) Module angle 10° Shading angle selectable 16° or18° Material Sheet parts made of corrosion protected aluminium-zinc-coated steel sheet Lever clamps: stainless steel Certificates, tests, standards: TUV certified Wind tunnel expertise Static according to eurocode Tested lightning current load capacity according to DIN EN 50164-1 and DIN EN 62305-3 Distribution: Detailed information is available at mounting instructions on http://www.voestalpine.com/polynorm/de/produkte/industrial_applications_metal/ifix Firmen-Name: Firmen-Straße: Firmen-PLZ und -Ort: Firmen-Telefon-Nr: Firmen-FAX-Nr: Firmen-Email-Kontakt: Firmen-Website: