JZ-450 Directional Crystal Growers

multi-crystal silicon ingots which are produced in less than 60The JZ-450 DSS furnace can produce 450kg high qualityJYT Corp, Beijing, ChinaPhone: +86-10-80803017Fax:+86-10-80803017Web: www.jytcorp.comRepresented byVacSol GmbH, GermanyPhone: +49 7025 895020Fax: +49 7025 895021Web: www.vacsol.comMail: info@vacsol.comJZ-450 DSS Furnace1.Function and Character of JZ-450 hours cycle time. The output of the equipment is large, the operation is simple and the interface is easy and clear for the operator. This design saves a lot of time for the operator to deal with the equipment. Thus the handling is optimized and costs are reduced. These DSS furnaces use quarts crucibles coated with high-purity silicon nitride. Through the rise of a temperature at gradient in the thermal insulation layer, directional solidification crystallization is in process. In the whole process of crystallization, only movement occurs in the separated thermal. Therefore, this design of DSS furnace greatly reduces the occurrence of the fault and greatly improves the stability of the furnace. Address: No 158, 4th,Jinghai RD, Beijing Economic-Technological Development Area, Beijing, China P.RJYT Corp, Beijing, ChinaPhone: +86-10-80803017Fax:+86-10-80803017Web: www.jytcorp.comRepresented byVacSol GmbH, GermanyPhone: +49 7025 895020Fax: +49 7025 895021Web: www.vacsol.comMail: info@vacsol.com2.Technical Parameters for JZ-450 DSS FurnaceNo Item and Name Parameter Additional1 Ingots/Run Weight 450 kg2 Dimensions(L×W×H)840×840×270 mm3 Crucible Size L×W×H 870×870×420 mm4 Cycle time One Run 60h5 Inner Chamber Vacuum LevelMaximum Below 1 Pa6 Temperature and measurement of Inner ChamberMaximum Temperature1575?7 Chamber Size Inner Diameter f1850 mm8 Inner Height 2300 mm9 Moving Distance of Lower Chamber900 mm10 Moving Distance of Steel Cage380 mm11 Main Chamber(L×W×H)3800×3200×5000 mm12 Platform(Include ladder)(L×W×H)4950×4760×4960 mm13 Weight Main Chamber 5500kg14 Platform 3350kgAddress: No 158, 4th,Jinghai RD, Beijing Economic-Technological Development Area, Beijing, China P.RJYT Corp, Beijing, ChinaPhone: +86-10-80803017Fax:+86-10-80803017Web: www.jytcorp.comRepresented byVacSol GmbH, GermanyPhone: +49 7025 895020Fax: +49 7025 895021Web: www.vacsol.comMail: info@vacsol.com15 Compressed Air Pressure 0.4~0.7MPa16 Volume 100L/min17 Argon Pressure Above 0.3MPa 18 Consumption 50~55m3/Ingot19 Flow Volume Control Range0~200L/min20 Helium(Optional) Pressure Above 0.3MPa 21 Consumption 5~6m3/Ingot22 Cooling Water Inlet Pressure Maximum 0.45MPa23 Pressure Difference Between Inlet and Outlet0.25 MPa24 Inlet Cooling Water Temperature=31?(Recommend 24±1?)25 Flow Volume 150-180 L/min26 Power for Vacuum PumpsVoltage 380V27 Power 11.5kw28 Frequency 50Hz29 Phase 3 Phase30 Power for Electronic Control SystemVoltage 380V31 Power 10kw32 Frequency 50Hz33 Phase 3 phase34 Power for Heating SystemVoltage 380V35 Power 165kwAddress: No 158, 4th,Jinghai RD, Beijing Economic-Technological Development Area, Beijing, China P.RJYT Corp, Beijing, ChinaPhone: +86-10-80803017Fax:+86-10-80803017Web: www.jytcorp.comRepresented byVacSol GmbH, GermanyPhone: +49 7025 895020Fax: +49 7025 895021Web: www.vacsol.comMail: info@vacsol.com36 Frequency 50Hz37 Phase 3 Phase38 Connector for Tubes Diameter of the Tube Connector for Pressure Relief Safety Valvef150 mm39 Diameter of Argon Tube Connectorf16 mm40 Diameter of helium Tube Connectorf16 mm41 Diameter of Inlet and Outlet of the Cooling WaterRc2?42 Vacuum Pump SystemVacuum Speed 300L/S43 Diameter of Main Inlet of the Pumpf150 mm44 Diameter of Subsidiary Inlet of the Pumpf16 mm45 Diameter of the Outlet f76 mm46 Forklift (Optional) Lift Height Maximum 1686 mm47 Lift Weight Maximum 1200kg48 Length of the Fore 1588 mm49 Width of the Fork 1120 mmAddress: No 158, 4th,Jinghai RD, Beijing Economic-Technological Development Area, Beijing, China P.RJYT Corp, Beijing, ChinaPhone: +86-10-80803017Fax:+86-10-80803017Web: www.jytcorp.comRepresented byVacSol GmbH, GermanyPhone: +49 7025 895020Fax: +49 7025 895021Web: www.vacsol.comMail: info@vacsol.com 3.Standard Configuration:No Item and Name Additional1 Main ChamberMain Chamber Frame2 Vacuum Chamber3 Lower Chamber Driving4 Insulation Driving 5 Hot Zone6 Gas Circle and other Driving System7 PC and PLC Control System8 Heating Power9 Temperature Measurement10 Pressure Measurement11 Pressure Relief Protection Device12 Coolant Water System13 Vacuum Pump System14 Platform15 Forklift Optional Address: No 158, 4th,Jinghai RD, Beijing Economic-Technological Development Area, Beijing, China P.R