Lambda Light - Flat Roof Mounting System Brochure

WarrantyyearLambda Light S+ Modular efficiency for flat roofsThe Lambda Light S+ is a highly cost-effective, ballasted PV mounting systemdesigned for flat roofs. Its light weight, low-profile design makes it suitable fora wide range of weight-limited roofs with various types of roof cladding. The Lambda Light S+ is fully, integrally bonded. Its modular design reduces parts counts and makes installation simple. And Lambda Light S+ uses Mounting Systems’ patented new Clickstone technology clamps to speed and simplify installation. With the Clickstone, you simply place the clamp at the desired position on the rail, clickit into place and tighten the bolt. Unsurpassed economy and versatilityThe Lambda Light S+ system is designed for standard, single south-facing rowconfigurations, the configuration of choice for operation at mid and higherlatitudes. It can be installed with either 10° or 15° pitch angles to suit theparticular project site. The system’s standard 10° pitch and wind deflectorshelp keep ballast requirements and costs low while providing maximumpractical roof coverage. Or, the system may be configured with 15° tilt tooptimize production while still maintaining low ballast requirements andminimizing roof loading.Flexibly configured ballast trays are designed to accommodate standard building materials and sizes making it easy and economical to procure ballast locally and minimize shipping, material handling and manpower costs.Long lasting safety and durabilityFor even more value enhancement, the system is fully integrally bonded. And Lambda Light S+ is fully compliant with the latest California fire codes. Lambda Light S+ is ETL listed as a Class A Fire Rated system with Type 1 modules. Lambda Light S+’s all-aluminum and stainless steel construction ensure that the Lambda Light S+ will provide years of safe, trouble-free service. Full wind-tunnel testing confirms the strength and long-term functionality of the Lambda Light S+ design. If or when the Lambda Light S+ installation reaches the end of its service life, it is completely recyclable.Lambda Light S + Product data sheetOrientation landscapeSouth orientationFlat roofFramed moduleUnframed moduleNEWMade in USA• CCR • CAGE: 6BWTO • DUNS: 965986628•Lambda Light S + Product data sheet For further information: www.mounting-systems.com Subject to technical changes 2015 © Mounting Systems. Inc.1 Roof / building structure must be adequate to support the loads associated with the addition of the PV array.2 Static calculations, PE-certification available upon request.3 For details, please consult Mounting Systems, Inc. full warranty document, available upon request. Lambda-Light-S+-TD-US-1501Application Flat roof1Maximum roof slope 5°Maximum bulding height Dependent on site wind loadSystem type Light-weight, low-drag, ballastedModule pitch 10° or 15° (selectable)Module orientation LandscapeModule type Framed/unframedMax/min module width Accommodates 60, 72, 96-cell modulesMaximum array size No maximumMinimum array size 100 ft² (10 m²)Standards 2 IBC 2009/2012ASCE 7-05 ASCE/SEI 7-10UL Subject 2703 Ed. 2 (pending)UL 1703 (Enhanced)Aluminum Design Manual 2010ANSI/AISC 360-05ACI 319-08Structural components Aluminum EN AW 6063 T66, 6060 T6Stainless steel 300 Series (V2A)Warranty 10 years 3Detail lower supportDetail back support with wind screen