Laminated Safety Glass with Embedded Photovoltaic Cells-Sunewat

Infosheetlaminated safety glass with embedded photovoltaic cellsSunewatYou have printedSunEwat-Llaminated safety glass with embedded photovoltaic cellsSunewat 1 SunEwat is a laminated safety glass with embedded photovoltaic cells.SunEwat can be installed in double glazing to provide the necessary thermal insulation. SunEwat iscovered by a 10-year product guarantee, while performance guarantees are given for 10 years (90% ofnominal power) and 20 years (80% of nominal power).Benefits:• SunEwat photovoltaic modules comply with the aesthetic and functional requirements necessaryfor perfect integration in buildings and replace materials that are currently used.• Cell-to-cell spacing can be changed to allow versatility in the light transmission of the module.• SunEwat is custom-built, providing architects with a lot of flexibility in the design of facades,canopies, sunshades, balustrades, etc. - while also featuring built-in electricity generation.• Using SunEwat photovoltaic modules enhances the building's environmental image.laminated safety glass with embedded photovoltaic cellsSunewat 2SunEwat-LSunEwat L is a laminated safety glass with embeddedphotovoltaic cells.SunEwat L can be installed in double glazing to providethe necessary thermal insulation. SunEwat L is coveredby a 10-year product guarantee, while performanceguarantees are given for 10 years (90% of nominalpower) and 20 years (80% of nominal power).Benefits:• SunEwat L photovoltaic modules comply with theaesthetic and functional requirements necessary forperfect integration in buildings and replace materialsthat are currently used.• Cell-to-cell spacing can be changed to allowversatility in the light transmission of the module.• SunEwat L is custom-built, providing architects witha lot of flexibility in the design of facades, canopies,sunshades, balustrades, etc. – while also featuringbuilt-in electricity generation.• Using SunEwat L photovoltaic modules enhancesthe building’s environmental image. The data are calculated using spectral measurements that are conform to standards EN 410, ISO 9050 (1990)and WIS/WINDAT.The Ug-value (formerly k-value) is calculated according to standard EN 673. The emissivity measurementcomplies with standards EN 673 (Annex A) and EN 12898.This document is no evaluation of the risk of glass breakage due to thermal stress. For tempered glass: the riskof spontaneous breakage due to Nickel-Sulfide is not covered by AGC Glass Europe. The Heat Soak Test isavailable on request.Specifications, technical and other data are based on information available at the time of preparation of thisdocument and are subject to change without notice. AGC Glass Europe can not be held responsible for anydeviation between the data introduced and the conditions on site. This document is only informative, in no wayit implies an acceptance of the order by AGC Glass Europe.See also conditions of use.