
Class-A Trading
- Home
- Companies & Suppliers
- Class-A Trading
- Downloads
- Leaflet Prana Brochure
Leaflet Prana Brochure
Air source, water sourceand brine source heat pumps optimized for geothermal applications.23?-50% energy costs?Ease of installation and integration?Free domestic hot water production?Renewable sources?Silent operation?Profitable investment on your propertyPrana i-NRG pg. 24Reversible heat pump with DC invertercompressor, high water temperature, total heatrecovery, air source, indoor/outdoorinstallation,14,7 kWPrana AWR DHW2 XE pg. 28Reversible heat pump, total heat recovery, airsource for outdoor installation 5,80 ÷ 23,5 kWPrana i-KI / i-KIR pg. 34Reversible or heating only heat pump withDC inverter compressor, air source, outdoorinstallationPrana AWR MTD 1 pg. 38Reversible heat pump, air source foroutdoor installation 5,07 ÷ 13,9 kWPrana AWR MTD2 XE pg. 40High efficiency reversible heat pump, airsource for outdoor installation 5,2 ÷ 22,1 kWPrana AW HT pg. 46High efficiency heat pump, air source foroutdoor installation, high water temperature10,4 ÷ 27,1 kWPrana WWR MTD2 pg. 48Reversible heat pump, water source5,2 ÷ 33,4 kWPrana WWR DHW2 pg. 52Reversible heat pump, total heat recovery,water source 5,1 ÷ 49,7 kWPrana BWR MTD2 pg. 56Reversible heat pump, geothermal source5,1 ÷ 32,6 kWPrana BWR DHW2 pg. 60Reversible heat pump, total heat recovery,geothermal source 5,0 ÷ 34,0 kWPrana SHAOCA pg. 64Fresh air unit with active thermodynamicrecovery, indoor installation 250 ÷ 600 m3/hClimaveneta introduces Prana, the heat pumps rangedeveloped in order to emulate with the highestsustainability and efficiency the heating requirementsof residential, small and medium office buildings,employing renewable energy directly from nature,such as air, water or ground.Index- 50% energy costsPrana units are characterized by high efficiency thanks to the capability to takemost of the energy for heating, cooling and domestic hot water production, directlyfrom air, water and ground.They employ the most advanced technologies, like the inverter driven compressors,fans and pumps, and an exclusive control system, designed to ensure highestintegration among the components of the system.This reduces energy cost even by 50% than traditional systems.Renewable sourceHeat pumps use the energy from the sun and employ directly the energy from air,water and ground, with no direct emission and no fossil fuel use.The heat from the sun is clean and unlimited, making the heat pump the bestrenewable source according to the RES European directive (Renewable EnergySource).Cutting-edge technologyThe technology has ensured the design of high efficiency heat pumps, which are50% more efficient than those designed in the last few years. This means areduction of energy consumption by 50%. The heat pump is today a cutting-edgeproduct that makes use of efficient solutions, such as the Inverter compressor.Over its 30 years of experience, Climaveneta has been focusing on research anddevelopment in order to design high efficiency products, such as Prana.Why the heat pump isthe best solution forcomfort and environment4 PRANA CATALOGUEInstalling a heat pump nowadays is the easiest andmost efficient way to reduce costs and emissionsof heating and air conditioning by simply using freeenergy from renewable resources such as air,water and ground.- 60% Emissions on the airThe heat pump provides the right answer to comfort in buildings in terms ofheating, cooling and hot water production.The heat pump takes 75% of the energy directly from the environment, makinguse of 25% of the power supply.The low energy consumption ensures a 60% reduction of CO2 emissions thantraditional systems.Comfort all year The comfort is guaranteed thanks to a single heat pump that can answerto the demand for heating, cooling and hot water production in all Seasons.Profitable investment on yourpropertyCompliance with increasingly strict energy consumption andenvironmental impact regulations, are becoming more and more crucialfactors for real estate valuation.Using PRANA in new buildings or in refurbishments is a simple andeffective way to combine an improvement of the energy class of thebuilding with an higher quality of comfort, enhancing the present andfuture value of the property.5Free domestic hot water productionAll units produce domestic hot water. Thanks to the exclusive total heat recoverysystem, domestic hot water is free in DHW2 models. During the cooling cycle, yoursystem will remove heat and humidity from your home and will transfer this heat to theoutdoor air.During the heating cycle, your system will remove heat and humidity from the outdoorair and will transfer this heat to your home. When operating in cooling mode yoursystem will cool fluids ( e.g water in the hydronic systems) and then it will transfer theheat to another fluid, air, water or ground. Thanks to heat pump it is possible to avoidheat wastes, using this heat for the production of hot water.Silent operationOptimized in each design and manufacturing choice, silent operation isamong the strong points of Prana units.The adoption, in air source units, of low noise fans with continuous regulation,guarantee minimum noise emission. Compressors are jacked and insulated in orderto reduce vibrations. Dedicated acoustic panels for indoor units ensure the lowestnoise emissions on the market.Heating down to -20°CClimaveneta has found the perfect solution for the operation of heat pumps inextreme weather conditions and the installation in harsh climate areas, down to -20°C.PRANA's selection of the most suitable technological components and compressorsensure an efficient operation of heat pumps, which goes beyond the limits of thetraditional units. This without using any other heating solution.6 PRANA CATALOGUEAll the advantages ofa new approach to heatingand comfortEase of installation andcomplete reliabilityPrana units are plug & play, ready for installation and equipped with all thecomponents necessary to install them in each system type: from lowtemperature systems based on radiant floor or fancoils, to more traditionalsystems with radiators.Low maintenance thanks to the use of sealed, factory-tested refrigerantcircuits.Integration among the componentsReliability is ensured by the installation of cutting-edge components andthe introduction of a central control system that coordinates the differentcomponents in the system. This eliminates communication inefficienciesand simplifies the installation, reducing the number of checks.All the models can be easily integrated with the existing heating systemand with other renewable sources as solar systems, both thermal andphotovoltaic.Best air qualityComfort would not exist without air renewal in new low-energy houses.Climaveneta has designed a controlled mechanical ventilation unit (SHAOCA)that ensures air renewal and purification inside the buildings.The heating, cooling of outdoor air, together with its purification andhumidification is ensured by the use of an integrated cooling circuit and thenreleased in the building. The renewed air is fresh all year long, maintaining aconstant and adequate temperature in the ambient.7One single unit for any heating, cooling anddomestic hot water requirement, with countlessadvantages from any point of view.Air, water and ground areprecious thermal sources.Their use in heat pumpsensures reduced energyexpenses and a completesustainable system.8 PRANA CATALOGUEsourcesAirThe use of the energy from the air can be the best solution for the productionof domestic hot water, heating and cooling.The PRANA new generation heat pumps use the energy taken from the airto heat even at low temperatures. High performances are increased by theadoption of Inverter technology (both in the i-NRG and i-KI(R) products).WaterRivers, ponds and also the sea are all important energy sources.Thanks to the property of water to maintain a constant temperature, prana waterheat pumps ensure the highest performances whilst reducing the energyconsumption by 50%.GroundThe ground stays at a fairly constant temperature under the surface, so the heatpump can be used throughout the year - even in areas with harsh winters.The research into the thermal field has lead to the development of heat pumpswhich are especially designed to adapt to every kind of soil. Prana is the mostinnovative solution in this field.9Heat pumps use a technology that allows to move thermalenergy from a source with low temperature to a receiver withhigher temperature.10 PRANA CATALOGUEPrana air-water heat pumps transferthe heat from the outside air to theambient using water as exchange fluid.solutions11Cutting-edge technologies are the result ofClimaveneta's experience in providing comfort.They ensure excellent performances at lowtemperaturesThermal energy in the air is particularlyhigh, even in winter and on cold nights.The heat pump uses this energy toprovide heating to generate hot water fordomestic use.The reversible units also provide coolingby absorbing the heat from the inside andreleasing it to the outside.Air source heat pumps do not haveadditional installation costs because theydo not require excavation to install them.Besides, the use of a single systemanswers all the requirements of thebuilding, making the air source unit thebest solution.Air solutions AWR DHW2 XEReversible air/water heat pump with production ofhot domestic water and total heat recovery.Outdoor installation.AWR MTD1Reversible air/water heat pump for water heatingup to 55°C and domestic hot water production.Outdoor installation.HEATING COOLING HOT WATERHEATING COOLING HOT WATERAWR MTD2 XEAir/water reversible heat pump for water heating upto 58°C and operating limits down to -15°C externalair temperature and domestic hot water production.Outdoor installation.HEATING COOLING HOT WATERAW HTAir/water only heating heat pump, for water heatingup to 65°C and operating limits down to -20°C.Outdoor installation.HEATING HOT WATERHEAT PUMPHEAT PUMPREVERSIBLEREVERSIBLEHEAT PUMPREVERSIBLEHEAT PUMPHEAT PUMPREVERSIBLEREVERSIBLEHEAT PUMPREVERSIBLEReversible air/water heat pump with DC Invertercompressor, production of hot domestic water and totalheat recovery. Indoor and outdoor installation.Air/water reversible or only heating heat pump, withDC Inverter compressor and domestic hot waterproduction. Outdoor installation.The water is a precious energy source becauseit ensures better performances (COP and EER) than other solutions, with extremely low costs.The water is a precious energy source because itensures premium energy efficiency levels but avery low initial investment.In this system the exchange of heat is possiblethanks to two wells, one for the water extractionand the other for draining. Simple in design andoperation but able to provide a significant numberof advantages, these ground water systems arehighly efficient, even if they have someprerequisites.First of all, installers need to observe local lawsand regulations on the extraction capacity and thetemperature variation of the water that returns tothe soil.The distance between the dewatering andimmersion wells should be at least 10-15 m andthe characteristics of the water must accuratelyfollow the technical instructions included in thetechnical bulletins and manuals.Furthermore, it is extremely important that theamount of water is enough; this can be easilycalculated before the system is installed.Water solutionsWWR MTD2Reversible water/water heat pumpfor water heating up to 55°C anddomestic hot water production.Indoor installation.WWR DHW2Reversible water/water heat pumpdomestichot water production. Indoorinstallation.HEAT PUMPHEAT PUMPREVERSIBLEREVERSIBLEHEAT PUMPREVERSIBLEHEATING COOLING HOT WATER12 PRANA CATALOGUERivers, ponds andgroundwater below thesurface provide animportant renewablesource of energy,thanks to the propertiesof water to maintain astable temperature allyear round.13solutions14 PRANA CATALOGUEGeothermal heatpumps use the groundas a heat source,because even a fewmeters below thesurface the groundtemperature is costantall year round.solutionsGeothermal solutions The heat extraction and release from the ground can beused to heat, cool and supply domestic hot water.The efficiency of this system is 4 times higher than theelectrical absorption.The exchange of heat is guaranteed byhorizontal and vertical loops.They usually involve a system ofpolyethylene pipes where a thermal fluidcomposed of water and glicole flowsthrough them in a closed circuit.This circulating fluid is an antifreezesolution. Different kinds of loops areavailable in order to meet the requirementsof different plants.Geothermal loops can be divided asfollows:- Horizontal loops are buried horizontallya few of meters below the surface.- Vertical loops are inserted vertically intothe soil when there are limited spaces.BWR MTD2Reversible heat pump, geothermalsource, for water heating up to 55°Cand domestic hot water production.Indoor installation.BWR DHW2Reversible heat pump, with domestic hotwater production and total heat recovery.Indoor installation.HEAT PUMPHEAT PUMPREVERSIBLEREVERSIBLEHEAT PUMPREVERSIBLEHEATING COOLING HOT WATER1516 PRANA CATALOGUEHorizontal loops require agreater amount of land surfacearea but they are less expensiveto install.Horizontal loops are laid intrenches, typically at a depth of1 - 1.5 m.They usually require a land surface area which is 2.5 - 3 timesbigger than the area that needs to be cooled.In summer the requested land surface area could be evenbigger. Alternatively, a series of pipes can be buried in a trench.In this case the geothermal exchanger grows in length.The most used systems are the 'Slinky' exchangers, whichhave a double loop system with 4 pipes.They are buried at a depth of 2.5 - 3m. The pipes can beeither PP or PE80 when installed on the surface and they havea diameter of DN25, DN32.The amount of heat that can be extracted ranges from 10 to15 W/m2 (indicative values) but they can reach higher values insandy soils, big amount of water and solar energy. The valuesdepend, even if partially, on the temperature variation of the air.Horizontalloops17Vertical loops allow the heat pump to usethe energy from a ground source, wherethe temperature is constant throughoutthe year, with great benefits in terms ofcost reduction.Vertical loops are generally consideredwhen the available land area is limited.Wells are bored to depths around 100 min order to reduce the pumping powerand increase the efficiency of the system.Vertical loops can reach depths around 200m if the tools andmachinery are suitable and the staff is highly-skilled.The loops are double U-shaped in PE 100 with DN32 (the mostcommon) and DN40 diameter.In order to avoid thermal interference, bore holes are spaced atleast 8-10m apart and the number of loops depends on the areaand the thermal or cooling power.Once the loops are installed, the borehole is commonly filled withbentonite grout - and eventually quartz sand, to increase thethermal conductivity.The thermal performance of the loop and the optimal operation ofthe system also depends on the grouting.The appropriate grounding avoids any interference betweensubsurface water spaces where the loops are installed.The performance, which is calculated in Watt (W) per meter,usually is 50 W/m (the standard value included in the VDI4640directive).Verticalloops? Back-lit display complete with remotetemperature and humidity probe.? User-friendly management of the system? Costumised management? Time bands programming? Up to 4 heat pumps in cascade? Domestic hot water production? Better Technical Assistance18 PRANA CATALOGUEII FasciaI Fascia0OFF4 8 12 16 20 24III Fascia IV Fascia V Fascia VI FasciaTemperature controlNADISYSTEM ensures dynamic control of water outlet temperature according to real needs in the building and the outside air temperature,optimising comfort and reducing wasted energy. The introduction of a single integrated control system for the coordination among the differentsystem components, eliminates inefficiencies in communication, simplifying installation and reducing the number of controllers.The remote keypad supplied with the unit can be used to freely set the room temperature, humidity, operating mode, domestic hot waterproduction and operating times for each zone. In summer the correct outlet temperature is guaranteed by the calculation of the dew point.Time bands programmingA timer is available to customise differentiated activation anddeactivation for each individual zone of the system, creating anoperating profile with up to 6 daily time bands.The time bands programming ensures to choose differenttemperatures according to different time.Smart management of the sourcesNadisystem integrates different energy sources. Energy is onlyconsumed when necessary and the use of energy sources isbased on availability, efficiency and cost, giving priority torenewable sources, where available. The supplementary sourcesare used to meet the building requirements at low outsidetemperatures by supplementing the heating capacity of the heatpump. System operation can be distinguished as monovalent, all-electric or bivalent. The controller can activate the external sourceto achieve one of the functions listed above.System managementThe NADISYSTEM control system for residential applications giveshigh operating flexibility by controlling the secondary circuits, that is,activating zone pumps and valves depending on the roomtemperature set on the remote keypad, and by controlling mixingvalves to ensure the correct water temperature in radiant systemsaccording to the climate conditions set for each circuit. There are 15different types of pre-configured systems for quick and easyinstallation, with the possibility to manage up to 5 remote keypadsfor controlling thermal load in likewise zones. Moreover, the cascadeconnection of up to 4 heat pumps ensures fine control over thecapacity delivered, without decreasing performance, and moreprecise system sizing.19RADIATORSRADIANTHEATINGDHWINTEGRATEDSOURCEFANCOILThe new electronic controller that ensuresgreater interaction among the componentsof the systems.20 PRANA CATALOGUEThe solutionsSpecific types of units designed for differentheating and cooling requirements.A wide range of products is the best choice for different typesof plants: high temperature units optimized for heating (HT),reversible medium temperature units (MTD) and units withtotal heat recovery for the supply of domestic hot water (DHW).Prana DHWReversible units that use total heat recovery to supply freedomestic hot water.In cooling mode, when the fluid is cooled, the heat rejectedfrom the unit exchanges with another source either from air,water or ground.The rejected heat is not wasted but recovered to producedomestic hot water.Reversible medium temperature units for hot water production up to60°C and domestic hot water as a priority.Ideal for heating and cooling using one single unit, they are particulary suitablefor radiator systems.Available in either water source, geothermal or air source models, withoperating limits down to -15°C external air temperature.Prana MTDHigh temperature units optimized for heating and domestic hotwater supply as priority. The units assure hot water production up to 65°C and operating limitsdown to -20°C.They are the best solution with traditional heating systems such asradiators and they also guarantee good performances if combined withradiator systems.Prana HTi-NRGi-KI / i-KIR AWR MTD1 AWR MTD2 XEWWR DHW2AW HTAWR DHW2 XEBWR DHW2WWR MTD2 BWR MTD2HEAT PUMPHEAT PUMPREVERSIBLEREVERSIBLEHEAT PUMPREVERSIBLEHEATING COOLING HOT WATERHEATING HOT WATER21HEATING COOLING HOT WATERThe rangeWWR MTD2Reversible water/water heat pump for water heating up to 55°Cand domestic hot water production.WWR DHW2Reversible water/water heat pump domestic hot waterproduction.HEAT PUMPHEAT PUMPREVERSIBLEREVERSIBLEHEAT PUMPREVERSIBLEHEATING COOLING HOT WATERHEAT PUMPHEAT PUMPREVERSIBLEREVERSIBLEHEAT PUMPREVERSIBLEi-NRGReversible air/water heat pump with DC Inverter compressor,production of hot domestic water and total heat recovery.i-KI / i-KIRAir/water reversible or only heating heat pump, with DC Invertercompressor and domestic hot water production.AirsolutionsPrana air source heat pumps transferthe heat from the external air usingwater as exchange fluid.? Simplified installation22 PRANA CATALOGUEWatersolutionsPrana water source heat pumps usewater from aquifer.? Highest energy efficiencyHydronicTerminalsAirrenewalunit SHAOCAUnit with controlled mechanical system for the air renewaland purification of modern buildings.a-CHD / i-CHDCassette type terminalMHDHi-wall type terminalResidential andcommercial terminalsWide range of hydronic terminalsfor different space requirements.? High environment comfort? Maximum versatility andconfigurabilityControlled mechanicalventilation system Fresh air unit with activethermodynamic recovery, for thebuildings' air renewal and purification.? Perfect Comfort? Increased energy classof the buildingHEATING COOLING HOT WATERAWR MTD2 XEAir/water reversible heat pump for water heating up to 58°Cand operating limits down to -15°C external air temperatureand domestic hot water production.HEATING COOLING HOT WATERHEATING COOLING HOT WATERHEATING HOT WATERHEAT PUMPHEAT PUMPREVERSIBLEREVERSIBLEHEAT PUMPREVERSIBLEAWR DHW2 XEReversible air/water heat pump with production of hotdomestic water and total heat recovery.AWR MTD1Reversible air/water heat pump for water heating upto 55°C and domestic hot water production.AW HTAir/water only heating heat pump, for water heating up to 65°Cand operating limits down to -20°C.GeothermalsolutionsPrana geothermal heat pumpstransfer the heat from the earththrough horizontal or vertical probes.? Highest energy efficiency? Lowest environmental impactElectronic device for the control and management ofcomponents. (Nadisystem is included in thecorresponding unit).IDRORELAXMeasurement & Verification Device23i-LIFE2High efficiency professional fan-coil powered by modulatingspeed centrifugal fan, with cabinet or in-built version.a-LIFE2Professional fan-coil, with cabinet or in-built version.BWR MTD2Reversible heat pump, geothermal source, for water heating upto 55°C and domestic hot water production.a-LIFE HPHigh head fan-coil for professional application, in-built versionControlsi-LIFE SlimResidential fan-coil, with inverter motor and tangential fan.Management andcontrol systemsSystems and devices to control andmanage components.? Great flexibility ? Real increase in comfort levels ? High reduction of wastesBWR DHW2Reversible heat pump, with domestic hot water production andtotal heat recovery.HEAT PUMPHEAT PUMPREVERSIBLEREVERSIBLEHEAT PUMPREVERSIBLEVersionsHEAT PUMPHEAT PUMPREVERSIBLEREVERSIBLEHEAT PUMPREVERSIBLE i-NRGReversible heat pump with inverter compressor, total heat recovery, air source forindoor/outdoor installation.CommandsElectronic control Nadisystem provides great application flexibility. The remote keyboard kit wired indoor and outdoortemperature sensors allow dynamic control of delivery temperature water, optimizing comfort in the room and increasingthe energy efficienty. The electronic board allows you to manage:- remote control wired, back-lit display complete with remote temperature and humidity probe.- outdoor temperature sensor for water plant side modular set point compensation- a zone of direct heating for radiator, floor heating or fan coil- a zone with mix valve for floor heating- electrical heating element for possible integration and anti-legionellosis cycle for cylinder- boiler or electric heater in substitution or in addition- the room controller can customise up to six time bands. The presence of the programmable timer allows the creation ofan operating profile containing up to 6 time bands.- up to 4 heat pump in cascade (with N-CM component)- several solutions through appropriate configurations of the controller and use of dedicated extension modules(accessorie), up to 5 zone.The defrost adopts a proprietary self-adaptive logic, which features the monitoring of numerous operational parameters.This allows to reduce the number and duration of the defrost cycles, with a benefit for the overall energy efficiency.Features? Structure and base in hot galvanised epoxy powder coated steel.? High effcient stainless steel (AISI 316) plate to plate exchanger (at the domestic hot water side), with low pressuredrop. It is positioned next after the compressor, it ensures the domestic hot water production. That can work either infull recovery or in part, with the constant optimization of efficiency through logic advanced adjusting controller.? High efficient plant side plate exchanger of stainless steel AISI 316 with low pressure drop. It meets the supply ofboth hot or cold water for the facility, regardless of the domestic hot water.? DC inverter scroll compressor with self-adaptive capacity adjustment. Reduced inrush current due to modulation byan inverter.? Electronic expansion valve.? Finned coils made with copper pipes and aluminium fins with large exchange surface area (100% fully qualitytested).? Axial electric fan in continuous current housed in aerodynamic conveyor profile with safety grill.? Low external air temperature device:continuous fan speed regulation with pressure switch.? The water circuit comes complete with:- Variable flow circulator plant side, the curves are selected by control, energy efficiency class A- Variable flow circulator domestic hot water side, energy efficiency class A- Expansion tank.- Safety valve.- Pressure switch, system side.- Pressure gauge.- Manual filling assembly.Unit descriptionsThe new i-NRG heat pump provides exactly the energy required by the system, perfectly following the real load of thebuilding, thanks to the modulation of the DC inverter fan. One single unit for the highest efficiency, sustainability and hugesavings, thanks to the advantages of DC frequency driven fans and circulating pumps (inverter) for both plant anddomestic hot water circuits. i-NRG is the new generation heat pump for all year round operation in any operating mode:single cycle (air conditioning, heating, domestic hot water) as well as combined cycle in total heat recovery (domestic hotwater together with cooling). Domestic hot water production is guaranteed by the dedicated exchanger for heat recovery:total, for free domestic hot water production, or partial. Domestic hot water is stored in a properly dimensioned storagetank. The unit can be installed indoor or outdoor, thus ensuring complete flexibility. Extended operating limits for all year,specially in heating:- Maximum flow temperature 60°C - Maximum external air temperature 45°C- Minimum external air temperature -15°CMain accessories? Wired room terminal with backlit display and temperature and humidity probe? Extension module for system configuration? Acoustic insulation casing kit (MANDATORY for outdoor installation)? Kit of rectangular air ducts and grills for indoor installation? Electric heater of integration for the heating system? Electric heater for hot water cylinder, of integration and for anti-legionella? Cascade management kit? Serial card RS485 for ModBus? Buffer tank 35,100,200 liters? Hot water cylinder 300,500 liters? 300 litres thermal store for domestic hot water, for DOMH2O kit? 300,500,1000 litres thermal store for domestic hot water with solar heat exchanger, for kit DOMH2O? DOMH2O15 e DOMH2O24 kit for domestic hot water with external heat exchanger plate-to-plate and pumpi-NRGIndoor installationi-NRGOutdoor installationRemote key pad withtemperature andhumidity probe24 PRANA CATALOGUEHA (9)BA (8)Reversible heat pump with DC inverter compressor, high water temperature,total heat recovery, air source, indoor/outdoor installation,14,7 kWNoteI-NRGSCROLL AXIAL PLATES251 Plant (side) cooling exchanger water (in/out) 12°C/7°C; Source (side) heat exchanger air (in) 35°C2 Plant (side) heat exchanger water (in/out) 40°C/45°C; Source (side) heat exchanger air (in) 7°C - 87% R.H.3 Plant (side) cooling exchanger water (in/out) 12°C/7°C; Plant (auxiliary side) heat exchanger recovery water (in/out) 45°C/50°C4 Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units;in compliance with ISO 3744 for non-certified units.5 Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding value obtained fromthe sound power level.6 Unit in standard configuration/execution, without optional accessories.i-NRG 0061 0061Power supply V/ph/Hz 230/1/50 400/3/50HYDRONIC TERMINALCOOLING ONLYCooling capacity (1) kW 14,7 14,7Total power input (1) kW 5,10 5,10EER (1) 2,88 2,88ESEER (1) 4,47 4,33HEATING ONLYHeating capacity (2) kW 15,7 15,7Total power input (2) kW 4,80 4,70COP (2) 3,27 3,34COOLING WITH TOTAL HEAT RECOVERYCooling capacity with total heat recovery (3) kW 13,7 13,8Total power input (3) kW 4,40 4,40Recovery heat exchanger capacity (3) kW 17,9 18,0TOTAL RECOVERY ONLYHeating capacity (2) kW 15,7 15,7Total power input (2) kW 4,80 4,70EXCHANGERSHEAT EXCHANGER USER SIDE IN REFRIGERATIONWater flow (1) 2,53 2,53Pressure drop (1) kPa 24,8 24,8HEAT EXCHANGER USER SIDE IN HEATINGWater flow (2) 2,73 2,73Pressure drop (2) kPa 28,8 28,8HEAT EXCHANGER RECOVERY USER SIDE IN REFRIGERATIONWater flow (3) 3,10 3,12Pressure drop (3) kPa 37,3 37,8HEAT EXCHANGER RECOVERY USER SIDE IN HEATINGWater flow (3) 2,68 2,68Pressure drop (3) kPa 27,9 27,8COMPRESSORSCompressors nr. N° 1 1No. Circuits N° 1 1NOISE LEVELNoise Power (4) dB(A) 68 68Noise Pressure (5) dB(A) 52 52SIZE AND WEIGHTA (6) mm 750 750B (6) mm 1050 1050H (6) mm 1600 1600Operating weight (6) kg 260 260HA (9)BA (8)NoteI-NRG26 PRANA CATALOGUEPlant (side) cooling exchanger water (in/out) 23°C/18°C; Source (side) heat exchanger air (in) 35°C2 Plant (side) heat exchanger water (in/out) 30°C/35°C; Source (side) heat exchanger air (in) 7°C - 87% R.H.3 Plant (side) cooling exchanger water (in/out) 23°C/18°C; Plant (auxiliary side) heat exchanger recovery water (in/out) 45°C/50°C4 Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units;in compliance with ISO 3744 for non-certified units.5 Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level.6 Unit in standard configuration/execution, without optional accessories.i-NRG(1) kW(1) kW(1)(1)(2) kW(2) kW(2)(3) kW(3) kW(3) kW(2) kW(2) kW(1)(1) kPa(2)(2) kPa(3)(3) kPa(3)(3) kPaN°N°(4) dB(A)(5) dB(A)(6) mm(6) mm(6) mm(6) kgV/ph/Hz0061 0061230/1/50 400/3/5019,6 19,75,40 5,403,63 3,654,47 4,3316,3 16,34,00 4,004,08 4,0817,9 18,04,90 4,9022,5 22,616,3 16,34,00 4,003,38 3,4044,4 44,82,82 2,8230,9 30,93,92 3,9459,4 60,22,68 2,6827,9 27,81 11 168 6852 52750 7501050 10501600 1600260 260Power supplyFLOOR HEATINGCOOLING ONLYCooling capacityTotal power inputEERESEERHEATING ONLYHeating capacityTotal power inputCOPCOOLING WITH TOTAL HEAT RECOVERYCooling capacity with total heat recoveryTotal power inputRecovery heat exchanger capacityTOTAL RECOVERY ONLYHeating capacityTotal power inputEXCHANGERSHEAT EXCHANGER USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER USER SIDE IN HEATINGWater flowPressure dropHEAT EXCHANGER RECOVERY USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER TOTAL RECOVERY ONLYWater flowPressure dropCOMPRESSORSCompressors nr.No. CircuitsNOISE LEVELNoise PowerNoise PressureSIZE AND WEIGHTABHOperating weight27Reversible heat pump with DC inverter compressor, high water temperature,total heat recovery, air source, indoor/outdoor installation,14,7 kW SCROLL AXIAL PLATESMain accessories? Wired room terminal with backlit display and temperature and humidity probe? Extension module for system configuration? Electric heater of integration for the heating system? Electric heater for hot water cylinder, of integration and for anti-legionella? Serial card RS485 for ModBus? Cascade management kit? Buffer tank 35,100,200 liters? Hot water cylinder 300,500 liters? 300 litres thermal store for domestic hot water, for use with the DOMH2O kit? 300,500,1000 litres thermal store for domestic hot water with solar heat exchanger, for use with DOMH2O kit? DOMH2O15 e DOMH2O24 kit for domestic hot water with external heat exchanger plate-to-plate and pumpAWR DHW2 XEVersionsAWR DHW2 XEReversible air/water heat pump with production of hot domestic water andtotal heat recovery.CommandsThe Nadisystem electronic control provides great application flexibility. The remote keyboard kit wired indoor and outdoortemperature sensors allow dynamic control of delivery temperature water, optimising comfort in the room and increasingthe energy efficiency. The electronic board allows you to manage:- wired remote control with back-lit display and with remote temperature and humidity probe.- outdoor temperature sensor for water plant side modular set point compensation- a zone of direct heating for radiator, floor heating or fan coil- a zone with mix valve for floor heating- electrical heating element for possible integration and anti-legionella cycle for cylinder- boiler or electric heater in substitution or in addition- the room controller can customise up to six time bands. The presence of the programmable timer allows the creation ofan operating profile containing up to 6 time bands.- up to 4 heat pump in cascade (with N-CM component)- several solutions through appropriate configurations of the controller and use of dedicated extension modules (accessorie), up to 5 zone.The defrost adopts a proprietary self-adaptive logic, which features the monitoring of numerous operational parameters.This allows to reduce the number and duration of the defrost cycles, with a benefit for the overall energy efficiency.Features? Structure and base in hot galvanised epoxy powder coated steel.? Stainless steel (AISI 316) high efficient and low pressure drop plate to plate exchanger (at the domestic hot water side). Itis positioned next after the compressor and it ensures the domestic hot water production. This can work either in full or inpartial recovery, with the constant optimisation of efficiency through advanced logic of the controller? Stainless steel AISI 316 plant side exchangers, which ensure high efficiency and low pressure drop and they meet thesupply of both hot and cold water of the building, regardless of the domestic hot water production? Hermetic scroll type compressors, equipped with the crankcase heater and thermal protection.? Finned coils made with copper pipes and aluminium fins with large exchange surface area (100% fully quality tested)? Axial electric fans, external rotor,6-pole electric motor fitted with thermal protection, housed in aerodynamic conveyorprofile with safety grill? Low external air temperature device: continuous fan speed regulation with pressure switch? Coil protection grille? Soft starter for 230V units /ms and 400V units /ts? The water circuit comes complete with:- Plant side variable flow circulator, the curves are selected by control, energy efficiency class A- Variable flow circulator domestic (hot water side), energy efficiency class A- Plant side differential pressure swich- Expansion tank- Safety valve- Manual filling assembly- Pressure gauge- Air vent valveHEAT PUMPHEAT PUMPREVERSIBLEREVERSIBLEHEAT PUMPREVERSIBLEAWR DHW2 XE - SLReversible air/water heat pump with production of hot domestic water and total heatrecovery. Super-low noise version.HEAT PUMPHEAT PUMPREVERSIBLEREVERSIBLEHEAT PUMPREVERSIBLEUnit descriptionsPRANA DHW is the new HIGH EFFICIENCY heat pump for all year round operation in any operating mode: single cycle (airconditioning, heating, domestic hot water) as well as combined cycle in total heat recovery (domestic hot water together withcooling). Energy efficiency is higher during the summer cycle, when the production of hot water is free, thanks to the fullrecovery of the heat. During the combined use, the DHW exchanger uses the temperature of the discharged gases to get insidethe accumulation sanitary water as high as 65° C. The advanced electronic regulation developed by Climaveneta ensures thehighest operational flexibility, fast working condition and a significant increase in the overall COP, which go hand in hand withelectricity and space reduction. Advantages, combined with the possibility of completely eliminating the traditional boiler, makingthe PRANA DHW heat pumps the ideal solution for energy saving applications in residential, hotel and the service sector.AWR DHW2 XERemote key pad withtemperature andhumidity probe28 PRANA CATALOGUEReversible heat pump, total heat recovery, air sourcefor outdoor installation 5,80 ÷ 23,5 kWNoteAWR DHW2 XE / BHABSCROLL AXIAL PLATES291 Plant (side) cooling exchanger water (in/out) 12°C/7°C; Source (side) heat exchanger air (in) 35°C2 Plant (side) heat exchanger water (in/out) 40°C/45°C; Source (side) heat exchanger air (in) 7°C - 87% R.H.3 Plant (side) cooling exchanger water (in/out) 12°C/7°C; Plant (auxiliary side) heat exchanger recovery water (in/out) 45°C/50°C4 Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units;in compliance with ISO 3744 for non-certified units.5 Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level.6 Unit in standard configuration/execution, without optional accessories.AWR DHW2 XE / B 0021 0025 0041 0025 0041 0065 0101V/ph/Hz 230/1/50 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 400/3/50(1) kW 5,80 6,90 10,0 6,90 9,90 15,7 23,5(1) kW 2,20 2,60 3,60 2,50 3,50 5,40 8,30(1) 2,64 2,65 2,78 2,76 2,83 2,91 2,83(1)(2) kW 7,30 8,70 12,5 8,60 12,3 19,8 30,6(2) kW 2,30 2,70 3,80 2,60 3,70 6,00 9,30(2) 3,17 3,22 3,29 3,31 3,32 3,30 3,29(3) kW 4,95 6,02 8,91 6,00 8,83 14,5 21,3(3) kW 2,12 2,47 3,54 2,47 3,37 4,78 7,20(3) kW 6,95 8,34 12,2 8,32 12,0 18,9 28,1(2) kW 7,30 8,70 12,5 8,60 12,3 19,8 30,6(2) kW 2,30 2,70 3,80 2,60 3,70 6,00 9,30(1) 1,00 1,19 1,72 1,19 1,70 2,70 4,05(1) kPa 5,66 5,74 7,43 5,74 7,29 7,14 6,84(2) 1,27 1,51 2,17 1,49 2,14 3,44 5,32(2) kPa 9,13 9,29 11,8 9,08 11,5 11,6 11,8(3) 1,21 1,45 2,13 1,45 2,09 3,29 4,88(3) kPa 8,27 8,54 11,3 8,50 10,9 10,6 9,95(3) 1,24 1,49 2,14 1,48 2,12 3,40 5,23(3) kPa 8,79 9,04 11,5 8,86 11,3 11,3 11,4N° 1 1 1 1 1 1 1N° 1 1 1 1 1 1 1(4) dB(A) 69 70 71 70 71 76 78(5) dB(A) 54 55 55 55 55 60 62(6) mm 1250 1250 1700 1250 1700 1700 1700(6) mm 420 420 650 420 650 650 650(6) mm 1125 1125 1200 1125 1200 1700 1700(6) kg 165 165 295 165 295 348 390Power supplyHYDRONIC TERMINALCOOLING ONLYCooling capacityTotal power inputEERESEERHEATING ONLYHeating capacityTotal power inputCOPCOOLING WITH TOTAL HEAT RECOVERYCooling capacity with total heat recoveryTotal power inputRecovery heat exchanger capacityTOTAL RECOVERY ONLYHeating capacityTotal power inputEXCHANGERSHEAT EXCHANGER USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER USER SIDE IN HEATINGWater flowPressure dropHEAT EXCHANGER RECOVERY USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER RECOVERY USER SIDE IN HEATINGWater flowPressure dropCOMPRESSORSCompressors nr.No. CircuitsNOISE LEVELNoise PowerNoise PressureSIZE AND WEIGHTABHOperating weightAWR DHW2 XENoteAWR DHW2 XE / SLHAB30 PRANA CATALOGUE1 Plant (side) cooling exchanger water (in/out) 12°C/7°C; Source (side) heat exchanger air (in) 35°C2 Plant (side) heat exchanger water (in/out) 40°C/45°C; Source (side) heat exchanger air (in) 7°C - 87% R.H.3 Plant (side) cooling exchanger water (in/out) 12°C/7°C; Plant (auxiliary side) heat exchanger recovery water (in/out) 45°C/50°C4 Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units;in compliance with ISO 3744 for non-certified units.5 Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level.6 Unit in standard configuration/execution, without optional accessories.AWR DHW2 XE / SL 0065 0101V/ph/Hz 400/3/50 400/3/50(1) kW 15,1 22,8(1) kW 5,10 7,80(1) 2,96 2,92(1)(2) kW 19,0 28,8(2) kW 5,90 8,80(2) 3,22 3,27(3) kW 14,1 21,3(3) kW 4,61 6,76(3) kW 18,5 27,7(2) kW 19,0 28,8(2) kW 5,90 8,80(1) 2,60 3,93(1) kPa 6,61 6,44(2) 3,30 5,00(2) kPa 10,7 10,5(3) 3,21 4,81(3) kPa 10,1 9,65(3) 3,28 4,96(3) kPa 10,5 10,3N° 1 1N° 1 1(4) dB(A) 73 74(5) dB(A) 57 58(6) mm 1700 1700(6) mm 650 650(6) mm 1700 1700(6) kg 348 390Power supplyHYDRONIC TERMINALCOOLING ONLYCooling capacityTotal power inputEERESEERHEATING ONLYHeating capacityTotal power inputCOPCOOLING WITH TOTAL HEAT RECOVERYCooling capacity with total heat recoveryTotal power inputRecovery heat exchanger capacityTOTAL RECOVERY ONLYHeating capacityTotal power inputEXCHANGERSHEAT EXCHANGER USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER USER SIDE IN HEATINGWater flowPressure dropHEAT EXCHANGER RECOVERY USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER RECOVERY USER SIDE IN HEATINGWater flowPressure dropCOMPRESSORSCompressors nr.No. CircuitsNOISE LEVELNoise PowerNoise PressureSIZE AND WEIGHTABHOperating weightReversible heat pump, total heat recovery, air sourcefor outdoor installation 5,80 ÷ 23,5 kWNoteAWR DHW2 XE / BHABSCROLL AXIAL PLATES311 Plant (side) cooling exchanger water (in/out) 23°C/18°C; Source (side) heat exchanger air (in) 35°C2 Plant (side) heat exchanger water (in/out) 30°C/35°C; Source (side) heat exchanger air (in) 7°C - 87% R.H.3 Plant (side) cooling exchanger water (in/out) 23°C/18°C; Plant (auxiliary side) heat exchanger recovery water (in/out) 45°C/50°C4 Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units;in compliance with ISO 3744 for non-certified units.5 Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level.6 Unit in standard configuration/execution, without optional accessories.AWR DHW2 XE / B 0021 0025 0041 0025 0041 0065 0101V/ph/Hz 230/1/50 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 400/3/50(1) kW 8,20 9,70 13,9 9,70 13,9 21,9 32,5(1) kW 2,20 2,60 3,70 2,50 3,70 5,90 8,80(1) 3,73 3,73 3,76 3,88 3,76 3,71 3,69(1)(2) kW 7,60 9,00 12,8 8,90 12,6 20,4 31,5(2) kW 1,80 2,20 3,10 2,10 3,00 4,80 7,60(2) 4,22 4,09 4,13 4,24 4,20 4,25 4,14(3) kW 6,80 8,26 12,0 8,21 12,1 19,7 28,8(3) kW 2,27 2,67 3,90 2,67 3,75 5,46 8,10(3) kW 8,94 10,8 15,7 10,7 15,6 24,8 36,4(2) kW 7,60 9,00 12,8 8,90 12,6 20,4 31,5(2) kW 1,80 2,20 3,10 2,10 3,00 4,80 7,60(1) 1,42 1,67 2,40 1,67 2,40 3,78 5,61(1) kPa 11,4 11,4 14,4 11,4 14,4 14,0 13,2(2) 1,32 1,56 2,22 1,54 2,18 3,53 5,46(2) kPa 9,84 9,88 12,3 9,66 11,9 12,2 12,4(3) 1,56 1,87 2,73 1,87 2,72 4,32 6,33(3) kPa 13,8 14,3 18,7 14,2 18,5 18,2 16,8(3) 1,24 1,49 2,14 1,48 2,12 3,40 5,23(3) kPa 8,79 9,04 11,5 8,86 11,3 11,3 11,4N° 1 1 1 1 1 1 1N° 1 1 1 1 1 1 1(4) dB(A) 69 70 71 70 71 76 78(5) dB(A) 54 55 55 55 55 60 62(6) mm 1250 1250 1700 1250 1700 1700 1700(6) mm 420 420 650 420 650 650 650(6) mm 1125 1125 1200 1125 1200 1700 1700(6) kg 165 165 295 165 295 348 390Power supplyFLOOR HEATINGCOOLING ONLYCooling capacityTotal power inputEERESEERHEATING ONLYHeating capacityTotal power inputCOPCOOLING WITH TOTAL HEAT RECOVERYCooling capacity with total heat recoveryTotal power inputRecovery heat exchanger capacityTOTAL RECOVERY ONLYHeating capacityTotal power inputEXCHANGERSHEAT EXCHANGER USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER USER SIDE IN HEATINGWater flowPressure dropHEAT EXCHANGER RECOVERY USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER TOTAL RECOVERY ONLYWater flowPressure dropCOMPRESSORSCompressors nr.No. CircuitsNOISE LEVELNoise PowerNoise PressureSIZE AND WEIGHTABHOperating weightAWR DHW2 XENoteAWR DHW2 XE / SLHAB32 PRANA CATALOGUE1 Plant (side) cooling exchanger water (in/out) 23°C/18°C; Source (side) heat exchanger air (in) 35°C2 Plant (side) heat exchanger water (in/out) 30°C/35°C; Source (side) heat exchanger air (in) 7°C - 87% R.H.3 Plant (side) cooling exchanger water (in/out) 23°C/18°C; Plant (auxiliary side) heat exchanger recovery water (in/out) 45°C/50°C4 Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units;in compliance with ISO 3744 for non-certified units.5 Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level.6 Unit in standard configuration/execution, without optional accessories.AWR DHW2 XE / SL 0065 0101V/ph/Hz 400/3/50 400/3/50(1) kW 20,9 31,4(1) kW 5,60 8,40(1) 3,73 3,74(1)(2) kW 19,4 29,3(2) kW 4,70 7,10(2) 4,13 4,13(3) kW 19,2 28,8(3) kW 5,26 7,60(3) kW 24,2 35,9(2) kW 19,4 29,3(2) kW 4,70 7,10(1) 3,61 5,42(1) kPa 12,7 12,3(2) 3,36 5,07(2) kPa 11,0 10,8(3) 4,21 6,25(3) kPa 17,3 16,3(3) 3,28 4,96(3) kPa 10,5 10,3N° 1 1N° 1 1(4) dB(A) 73 74(5) dB(A) 57 58(6) mm 1700 1700(6) mm 650 650(6) mm 1700 1700(6) kg 348 390Power supplyFLOOR HEATINGCOOLING ONLYCooling capacityTotal power inputEERESEERHEATING ONLYHeating capacityTotal power inputCOPCOOLING WITH TOTAL HEAT RECOVERYCooling capacity with total heat recoveryTotal power inputRecovery heat exchanger capacityTOTAL RECOVERY ONLYHeating capacityTotal power inputEXCHANGERSHEAT EXCHANGER USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER USER SIDE IN HEATINGWater flowPressure dropHEAT EXCHANGER RECOVERY USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER TOTAL RECOVERY ONLYWater flowPressure dropCOMPRESSORSCompressors nr.No. CircuitsNOISE LEVELNoise PowerNoise PressureSIZE AND WEIGHTABHOperating weightReversible heat pump, total heat recovery, air sourcefor outdoor installation 5,80 ÷ 23,5 kW SCROLL AXIAL PLATES33Features? Wired remote control, back-lit display complete with remote temperature and humidity probe? External air probe for weather compensation? Internal module complete with electronic board and relay connection strip.? Structure and base in hot galvanised epoxy powder coated steel.? High efficiency and low pressure drop stainless steel (AISI 316) water exchangers complete with closed cell insulationwith vapour barrier,antifreeze heating element and differencial pressure switch? Hermetic scroll DC brushless inverter driven compressors, equipped with the crankcase heater and thermal protection? Electronic expansion valve? Finned coils made with copper pipes and aluminium fins with large exchange surface area? Axial electric fan EC in continuous current housed in aerodynamic conveyor profile with safety grill and low external airtemperature device: continuous fan speed regulation with pressure switch? Condensate collecting tray? The water circuit comes complete with:- Water circulator for all models.- Expansion tank, 8 liters.- Safety valve.- Manual filling assembly.- Air vent valve.Main accessories? Wired room terminal with backlit display, with temperature and humidity probe? Extension module for system configuration? Three-way valve for domestic hot water? Electric heater of integration for the heating system? Electric heater for hot water cylinder, of integration and for anti-legionella? Cascade management kit? Serial card RS485 for ModBus? Buffer tank 35,100,200 liters? Hot water cylinder 300,500 liters? 300 litres thermal store for domestic hot water, for the DOMH2O kit? 300,500,1000 litres thermal store for domestic hot water with solar heat exchanger, for DOMH2O kit? DOMH2O15 e DOMH2O24 kit for domestic hot water, with external heat exchanger plate-to-plate and pumpVersionsi-KIAir cooled heating only heat pump, with axial fans, for heatingwater up to 60°C and operating limit down to -20°C outoorair temperature. Domestic hot water production.i-KIRAir cooled reversible heat pump, with axial fans, for heatingwater up to 60°C and operating limit down to -20°C outoorair temperature. Domestic hot water productionHEATING HOT WATERHEATING COOLING HOT WATERi-KIi-KIRCommandsNADISYSTEM Electronic control Nadisystem provides great application flexibility. The remote keyboard kit wired indoorand outdoor temperature sensors allow dynamic control of delivery temperature water, optimizing comfort in the roomand increasing the energy efficienty. The electronic board allows you to manage:- remote control wired, back-lit display complete with remote temperature and humidity probe.- outdoor temperature sensor for water plant side modular set point compensation- a zone of direct heating for radiator, floor heating or fan coil- a zone with mix valve for floor heating- electrical heating element for possible integration and anti-legionellosis cycle for cylinder- boiler or electric heater in substitution or in addition- the room controller can customise up to six time bands. The presence of the programmable timer allows the creationof an operating profile containing up to 6 time bands.- up to 4 heat pump in cascade (with N-CM component)- several solutions through appropriate configurations of the controller and use of dedicated extension modules (accessorie), up to 5 zone.The defrost adopts a proprietary self-adaptive logic, which features the monitoring of numerous operational parameters.This allows to reduce the number and duration of the defrost cycles, with a benefit for the overall energy efficiency.Unit descriptionsClimaveneta's system is based on an packaged external units with integrated hydronic module and by an internal unit with theelectronic regulation. i-KI and i-KIR heat pumps provide for heating, cooling and domestic hot water production. Particular care istaken for winter mode, that thanks to inverter technology is guaranteed beyond traditional units working limits, with domestic hotwater production at 60°C at -20°external air.i-KI and i-KIR untis can be coupled with traditional systems or radiant panels, guaranteeing always very high energy efficiency.Intallation is strongly simplified thanks to the integrated hydronic module.Remote key pad withtemperature andhumidity probe34 PRANA CATALOGUENotei-KI / i-KIRHABHABReversible or heating only heat pump with DC invertercompressor, air source, outdoor installation AXIAL PLATES351 Plant (side) cooling exchanger water (in/out) 12/7°; Source (side) heat exchanger air (in) 35°2 Values in compliance with EN14511-3:20113 Plant (side) heat exchanger water (in/out) 40/45°; Source (side) heat exchanger air (in) 7° - 87% R.H.4 Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 forEurovent certified units; in compliance with ISO 3744 for non-certified units.5 Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding valueobtained from the sound power level.6 Unit in standard configuration/execution, without optional accessoriesi-KIR-MTDPower supply V/ph/HzHYDRONIC TERMINALCOOLING ONLY (GROSS VALUE)Cooling capacity (1) kWTotal power input (1) kWEER (1)ESEER (1)COOLING ONLY (EN14511 VALUE)Cooling capacity (1)(2) kWEER (1)(2)ESEER (1)(2)Cooling energy classHEATING ONLY (GROSS VALUE)Heating capacity (3) kWTotal power input (3) kWCOP (3)HEATING ONLY (EN14511 VALUE)Heating capacity (3)(2) kWCOP (3)(2)Cooling energy classEXCHANGERSHEAT EXCHANGER USER SIDE IN REFRIGERATIONWater flow (1)Pressure drop (1) kPaHEAT EXCHANGER USER SIDE IN HEATINGWater flow (3)Pressure drop (3) kPaCOMPRESSORSCompressors nr. N°No. Circuits N°NOISE LEVELNoise Power (4) dB(A)Noise Pressure (5) dB(A)DIMENSIONS EXTERNAL UNIT i-KIR MTDAHBOperating weightDIMENSIONS INTERNAL UNIT i-EMR2AHBOperating weightmmmmmmkgmmmmmmkg4113347564113347564113347560031m230/1/504,911,962,514,922,453,26E9,002,873,139,003,10B0,841,5555,7401164500031m850882330850011m230/1/503,751,262,983,702,894,00C5,251,723,055,303,05B0,640,9111604683,363,70011m825787300590061m230/1/5012,13,983,0412,33,263,90A14,54,753,0514,73,23A2,082,4990721165510061m10001418330123(6)(6)(6)(6)Notei-KI / i-KIR36 PRANA CATALOGUEHABHAB1 Plant (side) cooling exchanger water (in/out) 23/18°; Source (side) heat exchanger air (in) 35°2 Values in compliance with EN14511-3:20113 Plant (side) heat exchanger water (in/out) 30/35°; Source (side) heat exchanger air (in) 7° - 87% R.H.4 Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1for Eurovent certified units; in compliance with ISO 3744 for non-certified units.5 Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding valueobtained from the sound power level.6 Unit in standard configuration/execution, without optional accessoriesI-KIR-MTDPower supply V/ph/HzFLOOR HEATINGCOOLING ONLY (GROSS VALUE)Cooling capacity (1) kWTotal power input (1) kWEER (1)ESEER (1)COOLING ONLY (EN14511 VALUE)Cooling capacity (1)(2) kWEER (1)(2)ESEER (1)(2)Cooling energy classHEATING ONLY (GROSS VALUE)Heating capacity (3) kWTotal power input (3) kWCOP (3)HEATING ONLY (EN14511 VALUE)Heating capacity (3)(2) kWCOP (3)(2)Cooling energy classEXCHANGERSHEAT EXCHANGER USER SIDE IN REFRIGERATIONWater flow (1)Pressure drop (1) kPaHEAT EXCHANGER USER SIDE IN HEATINGWater flow (3)Pressure drop (3) kPaCOMPRESSORSCompressors nr. N°No. Circuits N°NOISE LEVELNoise Power (4) dB(A)Noise Pressure (5) dB(A)DIMENSIONS EXTERNAL UNIT i-KIR MTDAHBOperating weightDIMENSIONS INTERNAL UNIT i-EMR2AHBOperating weightmmmmmmkgmmmmmmkg0011m230/1/504,451,044,284,404,154,00A5,801,444,035,854,01B0,761,011160460031m230/1/507,022,153,277,023,223,26E9,552,314,139,554,02B1,211,6449351164500011m8257870031m30059850882330850061m230/1/5016,44,333,7916,64,003,90A15,54,023,8615,74,10A2,822,6758661165510061m1000141833012373,555,9411334756411334756411334756(6)(6)(6)(6)Reversible or heating only heat pump with DC invertercompressor, air source, outdoor installation AXIAL PLATES37Notei-KI / i-KIRNotei-KI / i-KIRHABHABHABHABi-KI-MTDPower supply V/ph/HzHYDRONIC TERMINALHEATING ONLY (GROSS VALUE)Heating capacity (1) kWTotal power input (1) kWCOP (1)EXCHANGERSHEAT EXCHANGER USER SIDE IN HEATINGWater flow (1)Pressure drop (1) kPaCOMPRESSORSCompressors nr. N°No. Circuits N°NOISE LEVELNoise Power (2) dB(A)Noise Pressure (3) dB(A)DIMENSIONS EXTERNAL UNIT i-KI MTDAHBOperating weightDIMENSIONS INTERNAL UNIT i-EM2AHBOperating weightmmmmmmkgmmmmmmkg4113347564113347564113347560011m230/1/505,251,723,050,911160460031m230/1/509,002,873,141,541164500011m8257870031m300598508823308563,7 400061m230/1/5014,54,753,052,491165510061m1000141833012372(4)(4)(4)(4)i-KI-MTDPower supply V/ph/HzFLOOR HEATINGHEATING ONLY (GROSS VALUE)Heating capacity (1) kWTotal power input (1) kWCOP (1)EXCHANGERSHEAT EXCHANGER USER SIDE IN HEATINGWater flow (1)Pressure drop (1) kPaCOMPRESSORSCompressors nr. N°No. Circuits N°NOISE LEVELNoise Power (2) dB(A)Noise Pressure (3) dB(A)DIMENSIONS EXTERNAL UNIT i-KI MTDAHBOperating weightDIMENSIONS INTERNAL UNIT i-EM2AHBOperating weightmmmmmmkgmmmmmmkg4113347564113347564113347560011m230/1/505,801,444,031,011160460031m230/1/509,552,314,131,64351164500011m8257870031m30059850882330850061m230/1/5015,54,023,862,67661165510061m1000141833012355,9(4)(4)(4)(4)1 Plant (side) heat exchanger water (in/out) 30/35°; Source (side) heat exchanger air (in) 7° - 87% R.H.2 Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified units.3 Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level.4 Unit in standard configuration/execution, without optional accessories1 Plant (side) heat exchanger water (in/out) 40/45°; Source (side) heat exchanger air (in) 7° - 87% R.H.2 Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified units.3 Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level.4 Unit in standard configuration/execution, without optional accessoriesAWR MTD1VersionsHEATING COOLING HOT WATERAWR MTD1Reversible air/water heat pump for water heating up to55°C and domestic hot water production.Main accessories? Three-way valve for domestic hot water? Buffer tank 35,100,200 liters? Hot water cylinder 300,500 liters? 300 litres thermal store for domestic hot water, for use with the DOMH2O kit? 300,500,1000 litres thermal store for domestic hot water with solar heat exchanger, for use with kitDOMH2O? Kit boiler control? DOMH2O15 e DOMH2O24 kit for domestic hot water with external heat exchanger plate-to-plate andpump? 1,2,3 kw single-phase electric heater kit? External buffer tank and hydronic connecting kit? Removable metal mesh water filter kit? Rubber anti-vibration mounting kit? HSW11 Remote keyboardCommandsThe new generation electronic controller allows to manage the heat pump by using the Full Floatingtechnology, designed by Climaveneta for improving the system´s efficiency for the fans (Floating Fans), for thecirculating pump (Floating Flow) and finally for the working temperature (Floating Setpoint). This also allows toachieve all the following benefits: chiller operation even with larger operating limits, improvement of efficiencyin both standard and extreme conditions, much lower operating noise in part load conditions, lower installationtime, lower time for system set-up, broader operating limits, faster transient after defrosts.The electronic menu allows to manage:- domestic hot water production by external three-way valve (accessory)- a zone of direct heating- outdoor temperature sensor for water plant side modular set point compensation- electrical heating element for possible integration and anti-legionella cycle for cylinder- boiler or electric heater managementFeatures? Structure and base in hot galvanised epoxy powder coated steel.? High efficiency and low pressure drop stainless steel (AISI 316) water exchangers complete with closed-cell insulation with vapour barrier,antifreeze heating element and differencial pressure switch? Hermetic scroll type compressors, equipped with the crankcase heater and thermal protection? Finned coils made with copper pipes and aluminium fins with large exchange surface area (100% fullyquality tested)? Axial electric fans, external rotor, 6-pole electric motor with a fitted with thermal protection, housed inaerodynamic conveyor profile with safety grill? Low external air temperature device: continuous fan speed regulation with pressure switch? Condensate collecting tray ? Coil protection grille? Soft starter for 230V/1/50Hz units (ms)? The water circuit comes complete with:- Variable flow circulator for all models- Water side differential pressure switch.- Expansion tank.- Safety valve.- Manual filling assembly.- Pressure gauge.- Air vent valve.? Control with foolproof device accessible from the outside.Unit descriptionsHeat pumps AWR-MTD1 are reversible outdoor units with axial fans, hermetic scroll compressors and FullFloating technology. Full Floating is advanced electronics which has been developed by CLIMAVENETA in orderto meet the needs of typical residential small size and small/medium tertiary sector, thanks to theaccumulation. Another advantage that, together with the hydraulic module components it make extremelysimple the installation of heat pump: simply by connecting the unit to water plant and electricity so that it canbe put into operation.AWR MTD138 PRANA CATALOGUEReversible heat pump, air source foroutdoor installation 5,07 ÷ 13,9 kW SCROLL AXIAL PLATES39AWR-MTD1 0021 0031 0041 0051 0041 0051 0061V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50(1) kW 5,10 7,80 9,90 10,5 10,3 11,9 13,9(1) kW 2,00 3,30 3,90 3,80 4,00 4,50 5,00(1) 2,55 2,36 2,54 2,76 2,58 2,64 2,78(1) 3,15 2,98 3,06 3,37 3,20 3,25 3,38(1)(2) kW 5,10 7,80 9,94 10,5 10,3 11,9 13,9(1)(2) 2,41 2,29 2,42 2,63 2,45 2,54 2,69(1)(2) 2,94 2,86 2,88 3,17 3,01 3,09 3,25E F E D E D D(3) kW 6,80 10,1 12,7 13,1 13,0 14,6 17,0(3) kW 2,20 3,30 4,20 4,00 4,40 4,70 5,00(3) 3,09 3,06 3,02 3,28 2,95 3,11 3,40(3)(2) kW 6,81 10,1 12,7 13,1 13,0 14,6 17,0(3)(2) 2,94 2,96 2,88 3,12 2,82 2,98 3,28C C C B C C A(1) 0,88 1,34 1,70 1,81 1,77 2,05 2,39(1) kPa 17,5 25,1 23,1 21,9 25,8 28,0 26,8(3) 1,18 1,76 2,21 2,28 2,26 2,54 2,95(3) kPa 31,6 42,9 38,8 34,7 41,9 42,9 40,8N° 1 1 1 1 1 1 1N° 1 2 1 1 1 1 1(4) dB(A) 66 66 69 69 69 69 69(5) dB(A) 52 52 54 54 54 54 54(6) mm 900 900 900 900 900 900 900(6) mm 370 370 370 370 370 370 420(6) mm 640 940 1240 1240 1240 1240 1390(6) kg 95 115 140 160 140 160 170AWR-MTD1 0021 0031 0041 0051 0041 0051 0061Power supplyHYDRONIC TERMINALCOOLING ONLY (GROSS VALUE)Cooling capacityTotal power inputEERESEERCOOLING ONLY (EN14511 VALUE)Cooling capacityEERESEERCooling energy classHEATING ONLY (GROSS VALUE)Heating capacityTotal power inputCOPHEATING ONLY (EN14511 VALUE)Heating capacityCOPCooling energy classEXCHANGERSHEAT EXCHANGER USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER USER SIDE IN HEATINGWater flowPressure dropCOMPRESSORSCompressors nr.No. CircuitsNOISE LEVELNoise PowerNoise PressureSIZE AND WEIGHTABHOperating weightV/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50(1) kW 6,85 10,4 13,0 13,9 13,5 15,9 18,4(1) kW 2,04 3,44 4,07 3,97 4,19 4,58 5,34(1) 3,36 3,02 3,19 3,50 3,22 3,47 3,45(1) 3,15 2,98 3,06 3,37 3,20 3,25 3,38(2) kW 6,92 10,2 12,9 13,4 13,1 15,2 17,4(2) kW 1,74 2,57 3,36 3,22 3,45 3,96 4,05(2) 3,98 3,97 3,84 4,16 3,80 3,84 4,30(1) 1,18 1,79 2,24 2,40 2,33 2,75 3,18(1) kPa 31,6 44,7 40,0 38,6 44,5 50,4 47,2(2) 1,20 1,77 2,23 2,32 2,26 2,63 3,02(2) kPa 32,6 43,6 39,6 36,0 42,1 46,1 42,5N° 1 1 1 1 1 1 1N° 1 2 1 1 1 1 1(3) dB(A) 66 66 69 69 69 69 69(4) dB(A) 52 52 54 54 54 54 54(5) mm 900 900 900 900 900 900 900(5) mm 370 370 370 370 370 370 420(5) mm 640 940 1240 1240 1240 1240 1390(5) kg 95 115 140 160 140 160 170Power supply V/ph/HzFLOOR HEATINGCOOLING ONLY (GROSS VALUE)Cooling capacityTotal power inputEERESEERHEATING ONLY (GROSS VALUE)Heating capacityTotal power inputCOPEXCHANGERSHEAT EXCHANGER USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER USER SIDE IN HEATINGWater flowPressure dropCOMPRESSORSCompressors nr.No. CircuitsNOISE LEVELNoise PowerNoise PressureSIZE AND WEIGHTABHOperating weight1 Plant (side) cooling exchanger water (in/out) 12°C/7°C; Source (side) heat exchanger air (in) 35°C2 Values in compliance with EN14511-3:20113 Plant (side) heat exchanger water (in/out) 40°C/45°C; Source (side) heat exchanger air (in) 7°C - 87% R.H.4 Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified units.5 Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level.6 Unit in standard configuration/execution, without optional accessories.1 Plant (side) cooling exchanger water (in/out) 23°C/18°C; Source (side) heat exchanger air (in) 35°C2 Plant (side) heat exchanger water (in/out) 30°C/35°C; Source (side) heat exchanger air (in) 7°C - 87% R.H.3 Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified units.4 Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level.5 Unit in standard configuration/execution, without optional accessories.AWR MTD2 XEVersionsHEATING COOLING HOT WATERAWR MTD2 XEAir/water reversible heat pump for water heating up to 58°C and operatinglimits down to -15°C external air temperature and domestic hot waterproduction.AWR MTD2 XE/HAir/water reversible heat pump for water heating up to 58°C and operating limitsdown to -15°C external air temperature and domestic hot water production.Integrated electric heater.HEATING COOLING HOT WATERMain accessories? Wired room terminal with backlit display, with temperature and humidity probe? Extension module for system configuration? Three-way valve for domestic hot water? Electric heater of integration for the heating system? Electric heater for hot water cylinder, of integration and for anti-legionella? Cascade management kit? Serial card RS485 for ModBus? External buffer tank and hydronic connecting kit? Buffer tank 35,100,200 liters? Hot water cylinder 300,500 liters? 300 litres thermal store for domestic hot water, for use with kit DOMH2O? 300,500,1000 litres thermal store for domestic hot water with solar heat exchanger, for use with kit DOMH2O? DOMH2O15 e DOMH2O24 kit for domestic hot water with external heat exchanger plate-to-plate and pumpCommandsElectronic control Nadisystem provides great application flexibility. The remote keyboard kit wired indoor and outdoortemperature sensors allow dynamic control of delivery temperature water, optimizing comfort in the room and increasingthe energy efficiency. The electronic board allows you to manage:- remote control wired, back-lit display complete with remote temperature and humidity probe.- outdoor temperature sensor for water plant side modular set point compensation- a zone of direct heating for radiator, floor heating or fan coil- domestic hot water production by external three-way valve (accessory)- electrical heating element for possible integration and anti-legionella cycle for cylinder- boiler or electric heater in substitution or in addition- the room controller can customise up to six time bands. The presence of the programmable timer allows the creation of an operating profile containing up to 6 time bands.- up to 4 heat pump in cascade (with N-CM component)- several solutions through appropriate configurations of the controller and use of dedicated extension modules(accessorie), up to 5 zone.The defrost adopts a proprietary self-adaptive logic, which features the monitoring of numerous operational parameters.This allows to reduce the number and duration of the defrost cycles, with a benefit for the overall energy efficiency.Features? Structure and base in hot galvanised epoxy powder coated steel.? High efficiency and low pressure drop stainless steel (AISI 316) water exchangers complete with closed-cellinsulation with vapour barrier,antifreeze heating element and differencial pressure switch? Hermetic scroll type compressors, equipped with the crankcase heater and thermal protection? Finned coils made with copper pipes and aluminium fins with large exchange surface area (100% fully quality tested)? Axial electric fans, external rotor, 6-pole electric motor fitted with thermal protection, housed in aerodynamic conveyorprofile with safety grill? Low external air temperature device: continuous fan speed regulation with pressure switch? Electrical modulating resistance antifreeze to the base located between wing and base exchanger to improve andfacilitate the flow of water during defrosting? Condensate collecting tray (models 0011÷0051)? Coil protection grille? Soft starter for 230V/1/50Hz units (ms)? Phase sequence control relay for three phase models? The water circuit comes complete with:- Variable flow circulator for all models.- Water side differential pressure switch.- Expansion tank.- Safety valve.- Manual filling assembly.- Pressure gauge.- Air vent valve.Unit descriptionsHeat pumps AWR-MTD2-XE reversible units are able to provide heating, cooling and domestic hot water. Particular attentionwas paid to the winter, thanks to special technological devices is guaranteed beyond the normal limits of traditional units.Prana AWR-MTD2-XE can be combined with traditional systems or radiant panels, ensuring a high energy efficiency.All units are certified in accordance with the Class A classification Eurovent energy in heating. This makes them particularlysuitable for use radiant installations. The installation is greatly simplified through the integration of the hydraulic group simplyby connecting the unit to water plant and electricity so that it can be put into operation.AWR MTD2 XERemote key pad withtemperature andhumidity probe40 PRANA CATALOGUEHABHigh efficiency reversible heat pump, air sourcefor outdoor installation 5,2 ÷ 22,1 kWNoteAWR MTD2 XESCROLLENERGY CLASS AXIAL PLATESHAB411 Plant (side) cooling exchanger water (in/out) 12°C/7°C; Source (side) heat exchanger air (in) 35°C2 Values in compliance with EN14511-3:20113 Plant (side) heat exchanger water (in/out) 40°C/45°C; Source (side) heat exchanger air (in) 7°C - 87% R.H.4 Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified units.5 Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding valueobtained from the sound power level.6 Unit in standard configuration/execution, without optional accessoriesAWR MTD2 XE 0011 0025 0031 0041 0031 0041 0051 0061 0091V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50(1) kW 5,20 6,30 9,20 11,7 8,60 11,9 13,2 15,2 22,1(1) kW 1,70 2,20 3,10 4,00 3,00 4,00 4,60 5,00 7,20(1) 3,06 2,86 2,97 2,92 2,87 2,97 2,87 3,04 3,07(1) 3,62 3,63 3,52 3,46 3,42 3,65 3,24 3,55 3,57(1)(2) kW 5,20 6,30 9,23 11,7 8,63 11,9 13,2 15,2 22,2(1)(2) 3,08 2,89 3,01 2,97 2,91 3,02 2,91 3,06 3,09(1)(2) 3,65 3,64 3,62 3,53 3,46 3,70 3,30 3,57 3,61B C B B B B B B B(3) kW 6,10 7,30 10,8 13,6 10,6 13,8 15,4 17,5 24,6(3) kW 1,90 2,30 3,30 4,10 3,20 4,30 4,60 5,20 7,40(3) 3,21 3,17 3,27 3,32 3,31 3,21 3,35 3,37 3,32(3)(2) kW 6,10 7,30 10,8 13,6 10,6 13,8 15,4 17,5 24,5(3)(2) 3,23 3,20 3,30 3,35 3,34 3,24 3,38 3,38 3,33A A A A A A A A A(1) 0,90 1,08 1,58 2,01 1,48 2,05 2,27 2,62 3,80(1) kPa 12,3 14,3 12,7 16,1 11,1 16,6 13,6 15,2 13,0(3) 1,06 1,27 1,88 2,36 1,84 2,40 2,68 3,04 4,27(3) kPa 17,2 19,5 17,9 22,1 17,2 22,8 18,9 20,5 16,4N° 1 1 1 1 1 1 1 1 1N° 1 1 1 1 1 1 1 1 1(4) dB(A) 69 69 71 71 71 71 71 72 74(5) dB(A) 54 54 56 56 56 56 56 57 58(6) mm 900 900 900 900 900 900 900 1550 1550(6) mm 420 420 420 420 420 420 420 450 450(6) mm 1240 1240 1240 1390 1240 1390 1390 1200 1700(6) kg 145 150 155 170 155 170 180 250 335Power supplyHYDRONIC TERMINALCOOLING ONLY (GROSS VALUE)Cooling capacityTotal power inputEERESEERCOOLING ONLY (EN14511 VALUE)Cooling capacityEERESEERCooling energy classHEATING ONLY (GROSS VALUE)Heating capacityTotal power inputCOPHEATING ONLY (EN14511 VALUE)Heating capacityCOPCooling energy classEXCHANGERSHEAT EXCHANGER USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER USER SIDE IN HEATINGWater flowPressure dropCOMPRESSORSCompressors nr.No. CircuitsNOISE LEVELNoise PowerNoise PressureSIZE AND WEIGHTABHOperating weightAWR MTD2 XEHABNoteAWR MTD2 XEHAB42 PRANA CATALOGUE1 Plant (side) cooling exchanger water (in/out) 23°C/18°C; Source (side) heat exchanger air (in) 35°C2 Values in compliance with EN14511-3:20113 Plant (side) heat exchanger water (in/out) 30°C/35°C; Source (side) heat exchanger air (in) 7°C - 87% R.H.4 Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1for Eurovent certified units; in compliance with ISO 3744 for non-certified units.5 Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding valueobtained from the sound power level.6 Unit in standard configuration/execution, without optional accessories.AWR MTD2 XE 0011 0025 0031 0041 0031 0041 0051 0061 0091V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50(1) kW 7,20 8,30 12,3 15,7 11,7 15,8 17,7 20,2 29,2(1) kW 1,90 2,20 3,30 4,10 3,10 4,20 4,70 5,30 7,80(1) 3,79 3,77 3,73 3,83 3,77 3,76 3,77 3,81 3,74(1) 3,62 3,63 3,52 3,46 3,42 3,65 3,24 3,55 3,57(1)(2) kW 7,19 8,29 12,3 15,7 11,7 15,8 17,7 20,2 29,3(1)(2) 3,81 3,80 3,78 3,86 3,83 3,79 3,79 3,82 3,78(1)(2) 3,65 3,64 3,62 3,53 3,46 3,70 3,30 3,57 3,61B C B B B B B B B(3) kW 6,30 7,40 11,2 14,0 10,9 14,0 15,9 17,9 25,1(3) kW 1,50 1,80 2,60 3,30 2,60 3,30 3,80 4,20 6,00(3) 4,20 4,11 4,31 4,24 4,19 4,24 4,18 4,26 4,18(3)(2) kW 6,30 7,40 11,2 14,0 10,9 14,0 15,9 17,9 25,0(3)(2) 4,24 4,16 4,36 4,29 4,25 4,29 4,23 4,29 4,20A A A A A A A A A(1) 1,24 1,43 2,12 2,71 2,02 2,73 3,06 3,49 5,04(1) kPa 23,7 24,9 22,9 29,1 20,7 29,4 24,6 26,9 22,8(3) 1,09 1,28 1,94 2,42 1,89 2,42 2,75 3,10 4,35(3) kPa 18,3 19,9 19,1 23,3 18,1 23,3 20,0 21,3 16,9N° 1 1 1 1 1 1 1 1 1N° 1 1 1 1 1 1 1 1 1(4) dB(A) 69 69 71 71 71 71 71 72 74(5) dB(A) 54 54 56 56 56 56 56 57 58(6) mm 900 900 900 900 900 900 900 1550 1550(6) mm 420 420 420 420 420 420 420 450 450(6) mm 1240 1240 1240 1390 1240 1390 1390 1200 1700(6) kg 145 150 155 170 155 170 180 250 335Power supplyFLOOR HEATINGCOOLING ONLY (GROSS VALUE)Cooling capacityTotal power inputEERESEERCOOLING ONLY (EN14511 VALUE)Cooling capacityEERESEERCooling energy classHEATING ONLY (GROSS VALUE)Heating capacityTotal power inputCOPHEATING ONLY (EN14511 VALUE)Heating capacityCOPCooling energy classEXCHANGERSHEAT EXCHANGER USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER USER SIDE IN HEATINGWater flowPressure dropCOMPRESSORSCompressors nr.No. CircuitsNOISE LEVELNoise PowerNoise PressureSIZE AND WEIGHTABHOperating weightHABHigh efficiency reversible heat pump, air sourcefor outdoor installation 5,2 ÷ 22,1 kWNoteAWR MTD2 XESCROLLENERGY CLASS AXIAL PLATESHAB431 Plant (side) cooling exchanger water (in/out) 12°C/7°C; Source (side) heat exchanger air (in) 35°C2 Values in compliance with EN14511-3:20113 Plant (side) heat exchanger water (in/out) 40°C/45°C; Source (side) heat exchanger air (in) 7°C - 87% R.H.4 Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 forEurovent certified units; in compliance with ISO 3744 for non-certified units.5 Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding valueobtained from the sound power level.6 Unit in standard configuration/execution, without optional accessories.AWR MTD2 XE/H 0011 0025 0031 0041 0031 0041 0051 0061 0091V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50(1) kW 5,20 6,30 9,20 11,7 8,60 11,9 13,2 15,2 22,1(1) kW 1,70 2,20 3,10 4,00 3,00 4,00 4,60 5,00 7,20(1) 3,06 2,86 2,97 2,92 2,87 2,97 2,87 3,04 3,07(1) 3,62 3,63 3,52 3,46 3,42 3,65 3,24 3,55 3,57(1)(2) kW 5,20 6,30 9,23 11,7 8,63 11,9 13,2 15,2 22,2(1)(2) 3,08 2,89 3,01 2,97 2,91 3,02 2,91 3,06 3,09(1)(2) 3,65 3,64 3,62 3,53 3,46 3,70 3,30 3,57 3,61B C B B B B B B B(3) kW 6,10 7,30 10,8 13,6 10,6 13,8 15,4 17,5 24,6(3) kW 1,90 2,30 3,30 4,10 3,20 4,30 4,60 5,20 7,40(3) 3,21 3,17 3,27 3,32 3,31 3,21 3,35 3,37 3,32(3)(2) kW 6,10 7,30 10,8 13,6 10,6 13,8 15,4 17,5 24,5(3)(2) 3,23 3,20 3,30 3,35 3,34 3,24 3,38 3,38 3,33A A A A A A A A A(1) 0,90 1,08 1,58 2,01 1,48 2,05 2,27 2,62 3,80(1) kPa 12,3 14,3 12,7 16,1 11,1 16,6 13,6 15,2 13,0(3) 1,06 1,27 1,88 2,36 1,84 2,40 2,68 3,04 4,27(3) kPa 17,2 19,5 17,9 22,1 17,2 22,8 18,9 20,5 16,4N° 1 1 1 1 1 1 1 1 1kW 2 3 3 6 3 6 6 6 9N° 1 1 1 1 1 1 1 1 1(4) dB(A) 69 69 71 71 71 71 71 72 74(5) dB(A) 54 54 56 56 56 56 56 57 58(6) mm 900 900 900 900 900 900 900 1550 1550(6) mm 420 420 420 420 420 420 420 450 450(6) mm 1240 1240 1240 1390 1240 1390 1390 1200 1700(6) kg 145 150 155 170 155 170 180 250 335Power supplyHYDRONIC TERMINALCOOLING ONLY (GROSS VALUE)Cooling capacityTotal power inputEERESEERCOOLING ONLY (EN14511 VALUE)Cooling capacityEERESEERCooling energy classHEATING ONLY (GROSS VALUE)Heating capacityTotal power inputCOPHEATING ONLY (EN14511 VALUE)Heating capacityCOPCooling energy classEXCHANGERSHEAT EXCHANGER USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER USER SIDE IN HEATINGWater flowPressure dropELECTRIC HEATERElectrical Power COMPRESSORSCompressors nr.No. CircuitsNOISE LEVELNoise PowerNoise PressureSIZE AND WEIGHTABHOperating weightHABAWR MTD2 XENoteAWR MTD2 XEHAB44 PRANA CATALOGUE1 Plant (side) cooling exchanger water (in/out) 23°C/18°C; Source (side) heat exchanger air (in) 35°C2 Values in compliance with EN14511-3:20113 Plant (side) heat exchanger water (in/out) 30°C/35°C; Source (side) heat exchanger air (in) 7°C - 87% R.H.4 Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified units.5 Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level.6 Unit in standard configuration/execution, without optional accessories.AWR MTD2 XE/H 0011 0025 0031 0041 0031 0041 0051 0061 0091V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50(1) kW 7,20 8,30 12,3 15,7 11,7 15,8 17,7 20,2 29,2(1) kW 1,90 2,20 3,30 4,10 3,10 4,20 4,70 5,30 7,80(1) 3,79 3,77 3,73 3,83 3,77 3,76 3,77 3,81 3,74(1) 3,62 3,63 3,52 3,46 3,42 3,65 3,24 3,55 3,57(1)(2) kW 7,19 8,29 12,3 15,7 11,7 15,8 17,7 20,2 29,3(1)(2) 3,81 3,80 3,78 3,86 3,83 3,79 3,79 3,82 3,78(1)(2) 3,65 3,64 3,62 3,53 3,46 3,70 3,30 3,57 3,61B C B B B B B B B(3) kW 6,30 7,40 11,2 14,0 10,9 14,0 15,9 17,9 25,1(3) kW 1,50 1,80 2,60 3,30 2,60 3,30 3,80 4,20 6,00(3) 4,20 4,11 4,31 4,24 4,19 4,24 4,18 4,26 4,18(3)(2) kW 6,30 7,40 11,2 14,0 10,9 14,0 15,9 17,9 25,0(3)(2) 4,24 4,16 4,36 4,29 4,25 4,29 4,23 4,29 4,20A A A A A A A A A(1) 1,24 1,43 2,12 2,71 2,02 2,73 3,06 3,49 5,04(1) kPa 23,7 24,9 22,9 29,1 20,7 29,4 24,6 26,9 22,8(3) 1,09 1,28 1,94 2,42 1,89 2,42 2,75 3,10 4,35(3) kPa 18,3 19,9 19,1 23,3 18,1 23,3 20,0 21,3 16,9N° 1 1 1 1 1 1 1 1 1kW 2 3 3 6 3 6 6 6 9N° 1 1 1 1 1 1 1 1 1(4) dB(A) 69 69 71 71 71 71 71 72 74(5) dB(A) 54 54 56 56 56 56 56 57 58(6) mm 900 900 900 900 900 900 900 1550 1550(6) mm 420 420 420 420 420 420 420 450 450(6) mm 1240 1240 1240 1390 1240 1390 1390 1200 1700(6) kg 145 150 155 170 155 170 180 250 335Power supplyFLOOR HEATINGCOOLING ONLY (GROSS VALUE)Cooling capacityTotal power inputEERESEERCOOLING ONLY (EN14511 VALUE)Cooling capacityEERESEERCooling energy classHEATING ONLY (GROSS VALUE)Heating capacityTotal power inputCOPHEATING ONLY (EN14511 VALUE)Heating capacityCOPCooling energy classEXCHANGERSHEAT EXCHANGER USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER USER SIDE IN HEATINGWater flowPressure dropELECTRIC HEATERElectrical Power COMPRESSORSCompressors nr.No. CircuitsNOISE LEVELNoise PowerNoise PressureSIZE AND WEIGHTABHOperating weightHigh efficiency reversible heat pump, air sourcefor outdoor installation 5,2 ÷ 22,1 kW SCROLLENERGY CLASS AXIAL PLATES45AW HTVersionsAW HTAir/water only heating heat pump, for water heating up to 65°C andoperating limits down to -20°C.HEATING HOT WATERMain accessories? Three-way valve for domestic hot water? Buffer tank 35,100,200 liters? Hot water cylinder 300,500 liters? 300 litres thermal store for domestic hot water, for use with kit DOMH2O? 300,500 litres thermal store for domestic hot water with solar heat exchanger, for kit DOMH2O? DOMH2O15 e DOMH2O24 kit for domestic hot water with external heat exchanger plate-to-plate andpump? Control kit for heat pump with boiler? 1,2,3 kw single-phase electric heater kit? Radiant panels or radiator management kit Second zone? Control kit for underfloor heating with hydronic components? Removable metal mesh water filter kit? Rubber anti-vibration mounting kit? Wired room unit? Room thermostat wired basedCommandsElectronic control provides great application flexibility. The remote keyboard kit wired indoor and outdoortemperature sensors allow dynamic control of delivery temperature water, optimizing comfort in the room andincreasing the energy efficienty. The electronic board PRO EXTENDED allows you to manage:- domestic hot water production by external three-way valve (accessory)- circulator on system side- a zone of direct heating- outdoor temperature sensor for water plant side modular set point compensation- electrical heating element for possible integration and anti-legionella cycle for cylinder- integrated boiler with heat pump- several solutions through appropriate configurations of the controller and use of dedicated extension modules(accessories)Features? Structure and base in hot-dip galvanised steel with epoxy powder coating finish.? Circulating pump for all models? High-efficiency plate exchangers in AISI 316 stainless steel with low pressure drops, fitted with heatingelement for frost protection.? High efficiency cycle EVI Hermetic Scroll Compressor (with hot gas direct injection into the compressor) toreach 65° C, with the crankcase heater and thermal protection? Finned coils made with copper pipes and aluminium fins with large exchange surface area (100% fullyquality tested); sub cooling circuit to prevent the icing at the basement? Axial electric fans, external rotor, 6-pole electric motor fitted with thermal protection, housed inaerodynamic conveyor profile with safety grill? A condense collecting tray within water discharge? Electrical resistance modulating antifreeze to the base located between wing and base exchanger toimprove and facilitate the flow of water during the defrosting? Coil protection grille? Soft starter for 230V/1/50Hz units (ms)? Phase sequence control relay for three phase models? The water circuit comes complete with:- Expansion tank.- Safety valve.- Manual filling assembly.- Pressure gauge.- Air vent valve.Unit descriptionsAW HT is an ideal solution for systems with heating radiators, where the water high temperature is needed.The EVI technology compressor with additional steam injection in the compressing cycle assures a watertemperature of 65°C and operating limits as low as -20°C. Neither probes nor connections pipes to wells areneeded; the installation is simple, this is a suitable solution for all applications.AW HT46 PRANA CATALOGUEHABHigh efficiency heat pump, air source for outdoorinstallation, high water temperature 10,4 ÷ 27,1 kWNoteAW-HTHABNoteAW-HTSCROLLENERGY CLASS AXIAL PLATES471 Plant (side) heat exchanger water (in/out) 30°C/35°C; Source (side) heat exchanger air (in) 7°C - 87% R.H.2 Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units;in compliance with ISO 3744 for non-certified units.3 Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from thesound power level.4 Unit in standard configuration/execution, without optional accessories.1 Plant (side) heat exchanger water (in/out) 40°C/45°C; Source (side) heat exchanger air (in) 7°C - 87% R.H.2 Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units;in compliance with ISO 3744 for non-certified units.3 Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding value obtainedfrom the sound power level.4 Unit in standard configuration/execution, without optional accessories.AW HT 0031 0041 0041 0061 0071V/ph/Hz 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50(1) kW 10,4 15,1 14,3 19,7 27,1(1) kW 3,00 4,20 4,00 5,60 7,40(1) 3,47 3,60 3,58 3,52 3,66(1) 1,81 2,62 2,48 3,42 4,71(1) kPa 12,5 13,7 12,3 18,4 25,1N° 1 1 1 1 1N° 1 1 1 1 1(2) dB(A) 70 70 70 71 74(3) dB(A) 55 55 55 56 58(4) mm 900 900 900 900 1470(4) mm 420 420 420 420 570(4) mm 1240 1390 1390 1390 1700(4) kg 150 160 160 170 320AW HT 0031 0041 0041 0061 0071V/ph/Hz 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50(1) kW 10,5 14,9 14,1 19,7 26,6(1) kW 2,58 3,50 3,35 4,70 6,05(1) 4,07 4,26 4,21 4,19 4,40(1) 1,81 2,57 2,45 3,41 4,61(1) kPa 12,6 13,1 11,9 18,3 24,0N° 1 1 1 1 1N° 1 1 1 1 1(2) dB(A) 70 70 70 71 74(3) dB(A) 55 55 55 56 58(4) mm 900 900 900 900 1470(4) mm 420 420 420 420 570(4) mm 1240 1390 1390 1390 1700(4) kg 150 160 160 170 320Power supplyHYDRONIC TERMINALHEATING ONLY (GROSS VALUE)Heating capacityTotal power inputCOPEXCHANGERSHEAT EXCHANGER USER SIDE IN HEATINGWater flowPressure dropCOMPRESSORSCompressors nr.No. CircuitsNOISE LEVELNoise PowerNoise PressureSIZE AND WEIGHTA BHOperating weightPower supplyFLOOR HEATINGHEATING ONLY (GROSS VALUE)Heating capacityTotal power inputCOPEXCHANGERSHEAT EXCHANGER USER SIDE IN HEATINGWater flowPressure dropCOMPRESSORSCompressors nr.No. CircuitsNOISE LEVELNoise PowerNoise PressureSIZE AND WEIGHTABHOperating weightWWR MTD2WWR MTD2Reversible water/water heat pump for water heating up to 55°C anddomestic hot water production.HEATING COOLING HOT WATERVersionsMain accessories? Wired room terminal with backlit display and temperature and humidity probe? Extension module for system configuration? Three-way valve for domestic hot water? Electric heater of integration for the heating system? Electric heater for hot water cylinder, of integration and for anti-legionella? Cascade management kit? Serial card RS485 for ModBus? Buffer tank 35,100,200 liters? Hot water cylinder 300,500 liters? 300 litres thermal store for domestic hot water, for use with kit DOMH2O? 300,500,1000 litres thermal store for domestic hot water with solar heat exchanger, for use with kitDOMH2O? DOMH2O15 e DOMH2O24 kit for domestic hot water with external heat exchanger plate-to-plate andpumpCommandsElectronic control Nadisystem provides great application flexibility. The remote keyboard kit wired indoor andoutdoor temperature sensors allow dynamic control of delivery temperature water, optimizing comfort in theroom and increasing the energy efficiency. The electronic board allows you to manage:- remote control wired, back-lit display complete with remote temperature and humidity probe.- outdoor temperature sensor for water plant side modular set point compensation- a zone of direct heating for radiator, floor heating or fan coil- domestic hot water production by external three-way valve (accessory)- electrical heating element for possible integration and anti-legionella cycle for cylinder- boiler or electric heater in substitution or in addition- the room controller can customise up to six time bands. The presence of the programmable timer allows the creation of an operating profile containing up to 6 time bands.- up to 4 heat pump in cascade (with N-CM component)- several solutions through appropriate configurations of the controller and use of dedicated extension modules(accessorie), up to 5 zone.Features? Structure and base in hot galvanised epoxy powder coated steel.? High-efficiency plate exchangers in AISI 316 stainless steel with low pressure drops, fitted with heatingelement for frost protection.? Hermetic scroll type compressors, equipped with the crankcase heater and thermal protection? Case panels are insulated within low noise material for further improvement of silence? Rubber vibration damper.? Soft starter for 230V/1/50Hz units (ms)? Phase sequence control relay for three phase models? The water circuit comes complete with:- Variable flow circulator for 0011÷0061 models and centrifugal variable flow pumpfor models 0071÷0121, plant side- Modulating valve to reduce water consumption (source side).- Safety valve.- Expansion tank.- Manual filling assembly- Pressure gauge.- Air vent valve.- Drain valve on both plant and source circuits.- Differential pressure switch on source side and system side.Unit descriptionsThe MTD2 water-cooled heat pump are reversible units for heating, cooling and domestic hot water by externalthree-way valve (accessory). Both the MTD2 heat pumps are suitable for traditional heating systems and radiantpanels. The latter, working with water at lower temperatures, ensure a higher yield and are particularly appreciatedfor new buildings with low energy consumption that point on using renewable energy resources. The installation isgreatly simplified through the integration of the group simply by connecting the unit to the water plant and theelectrical system so that it can be put into operation.WWR MTD2Remote key pad withtemperature andhumidity probe48 PRANA CATALOGUEHBAReversible heat pump, water source5,2 ÷ 33,4 kWNoteWWR-MTD2 SCROLL PLATES491 Plant (side) cooling exchanger water (in/out) 12°C/7°C; Source (side) heat exchanger water (in/out) 30°C/35°C2 Values in compliance with EN14511-3:20113 Plant (side) heating exchanger water (in/out) 40°C/45°C; Source (side) heat exchanger water (in/out) 10°C/* °C (flow rate as in cooling)4 Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units;in compliance with ISO 3744 for non-certified units.5 Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level.6 Unit in standard configuration/execution, without optional accessories.WWR MTD2 0011 0025 0031 0041 0025 0031 0041 0061 0071 0091 0101 0121V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50(1) kW 5,20 7,20 8,80 11,3 7,30 8,90 11,8 15,7 19,8 22,9 26,0 33,4(1) kW 1,50 2,00 2,60 3,20 1,90 2,40 3,20 4,00 5,10 5,80 6,80 8,40(1) 3,47 3,60 3,38 3,53 3,84 3,71 3,69 3,92 3,88 3,95 3,82 3,98(1) 3,81 4,21 3,94 3,95 4,54 4,18 4,19 4,33 4,38 4,44 4,31 4,30(1)(2) kW 5,21 7,21 8,83 11,3 7,31 8,93 11,8 15,7 19,9 23,0 26,2 33,6(1)(2) 3,16 3,36 3,02 3,22 3,57 3,28 3,35 3,64 3,50 3,62 3,46 3,68(1)(2) 3,43 3,85 3,42 3,53 4,15 3,61 3,74 3,97 3,87 4,00 3,83 3,92F F G F E F F E E E E E(3) kW 6,98 9,53 11,9 15,0 9,37 11,8 15,6 20,6 25,5 29,6 33,9 42,8(3) kW 1,70 2,30 3,00 3,60 2,20 2,79 3,70 4,58 5,88 6,47 7,68 9,56(3) 4,11 4,14 3,97 4,17 4,26 4,23 4,22 4,48 4,34 4,57 4,41 4,48(3)(2) kW 6,97 9,52 11,9 15,0 9,36 11,8 15,6 20,5 25,4 29,5 33,7 42,6(3)(2) 3,80 3,90 3,59 3,83 4,00 3,80 3,87 4,18 3,92 4,18 4,00 4,13D D E D C D C B C C C C(1) 0,90 1,24 1,51 1,95 1,26 1,53 2,03 2,70 3,41 3,94 4,48 5,75(1) kPa 7,51 11,4 16,6 19,0 11,7 17,0 20,7 21,5 23,7 20,5 27,5 28,4(3) 1,21 1,66 2,07 2,60 1,63 2,05 2,72 3,57 4,43 5,14 5,89 7,44(3) kPa 13,8 20,3 31,0 33,9 19,6 30,4 37,0 37,6 40,0 34,8 47,7 47,6(1) 1,14 1,57 1,95 2,48 1,57 1,93 2,56 3,37 4,26 4,91 5,61 7,15(1) kPa 12,3 18,3 27,5 30,8 18,3 27,1 32,9 33,5 37,0 31,7 43,2 44,0(3) 1,15 1,57 1,95 2,48 1,57 1,93 2,57 3,37 4,26 4,91 5,61 7,15(3) kPa 12,3 18,3 27,5 30,7 18,3 27,0 33,0 33,5 37,0 31,7 43,2 43,9N° 1 1 1 1 1 1 1 1 1 1 1 1N° 1 1 1 1 1 1 1 1 1 1 1 1(4) dB(A) 52 53 53 58 53 53 58 59 66 66 70 70(5) dB(A) 37 38 38 43 38 38 43 44 51 51 55 55(6) mm 845 845 845 845 845 845 845 845 845 845 845 845(6) mm 680 680 680 680 680 680 680 680 680 680 680 680(6) mm 1105 1105 1105 1105 1105 1105 1105 1105 1105 1105 1105 1105(6) kg 188 190 195 210 190 195 210 225 230 245 250 270Power supplyHYDRONIC TERMINALCOOLING ONLY (GROSS VALUE)Cooling capacityTotal power inputEERESEERCOOLING ONLY (EN14511 VALUE)Cooling capacityEERESEERCooling energy classHEATING ONLY (GROSS VALUE)Heating capacityTotal power inputCOPHEATING ONLY (EN14511 VALUE)Heating capacityCOPCooling energy classEXCHANGERSHEAT EXCHANGER USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER USER SIDE IN HEATINGWater flowPressure dropHEAT EXCHANGER SOURCE SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER SOURCE SIDE IN HEATINGWater flowPressure dropCOMPRESSORSCompressors nr.No. CircuitsNOISE LEVELNoise PowerNoise PressureSIZE AND WEIGHTABHOperating weightHBAWWR MTD2NoteWWR-MTD2 50 PRANA CATALOGUE1 Plant (side) cooling exchanger water (in/out) 23°C/18°C; Source (side) heat exchanger water (in/out) 30°C/35°C2 Values in compliance with EN14511-3:20113 Plant (side) heating exchanger water (in/out) 30°C/35°C; Source (side) heat exchanger water (in/out) 10°C/*°C (flow rate as in cooling)4 Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units;in compliance with ISO 3744 for non-certified units.5 Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level.6 Unit in standard configuration/execution, without optional accessories.WWR MTD2 0011 0025 0031 0041 0025 0031 0041 0061 0071 0091 0101 0121V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50(1) kW 7,17 9,89 11,9 15,1 9,42 12,0 15,8 21,3 26,8 30,7 34,8 44,8(1) kW 1,51 1,97 2,57 3,28 1,85 2,42 3,28 4,11 5,27 6,04 7,01 8,76(1) 4,75 5,02 4,63 4,60 5,09 4,96 4,82 5,18 5,09 5,08 4,96 5,11(1) 3,81 4,21 3,94 3,95 4,54 4,18 4,19 4,33 4,38 4,44 4,31 4,30(1)(2) kW 7,18 9,89 11,9 15,1 9,43 12,0 15,8 21,3 26,9 30,8 35,0 45,0(1)(2) 4,30 4,60 4,06 4,13 4,67 4,31 4,30 4,70 4,48 4,57 4,43 4,64(1)(2) 3,43 3,85 3,42 3,53 4,15 3,61 3,74 3,97 3,87 4,00 3,83 3,92F F G F E F F E E E E E(3) kW 7,50 10,1 12,6 15,9 10,1 12,6 16,5 22,0 27,4 31,7 36,4 45,5(3) kW 1,33 1,76 2,30 2,86 1,69 2,21 2,87 3,67 4,66 5,23 6,10 7,70(3) 5,64 5,74 5,48 5,56 5,98 5,70 5,75 5,99 5,88 6,06 5,97 5,91(3)(2) kW 7,50 10,1 12,6 15,9 10,1 12,6 16,5 22,0 27,3 31,6 36,2 45,3(3)(2) 5,03 5,21 4,72 4,90 5,43 4,89 5,04 5,36 5,06 5,31 5,17 5,24D D E D C D C B C C C C(1) 1,24 1,71 2,06 2,61 1,63 2,08 2,72 3,67 4,62 5,29 6,00 7,73(1) kPa 14,4 21,6 30,7 34,1 19,6 31,3 37,0 39,7 43,5 36,9 49,5 51,4(3) 1,30 1,75 2,18 2,75 1,75 2,18 2,87 3,82 4,74 5,49 6,30 7,89(3) kPa 15,8 22,8 34,5 37,9 22,7 34,5 41,1 43,0 45,8 39,7 54,5 53,5(1) 1,49 2,03 2,48 3,15 1,93 2,48 3,26 4,35 5,50 6,29 7,17 9,19(1) kPa 20,8 30,6 44,7 49,8 27,7 44,6 53,3 55,8 61,6 52,1 70,5 72,6(3) 1,49 2,03 2,48 3,15 1,93 2,48 3,27 4,35 5,50 6,29 7,16 9,19(3) kPa 20,8 30,6 44,6 49,7 27,6 44,6 53,4 55,8 61,6 52,1 70,4 72,6N° 1 1 1 1 1 1 1 1 1 1 1 1N° 1 1 1 1 1 1 1 1 1 1 1 1(4) dB(A) 52 53 53 58 53 53 58 59 66 66 70 70(5) dB(A) 37 38 38 43 38 38 43 44 51 51 55 55(6) mm 845 845 845 845 845 845 845 845 845 845 845 845(6) mm 680 680 680 680 680 680 680 680 680 680 680 680(6) mm 1105 1105 1105 1105 1105 1105 1105 1105 1105 1105 1105 1105(6) kg 188 190 195 210 190 195 210 225 230 245 250 270Power supplyFLOOR HEATINGCOOLING ONLY (GROSS VALUE)Cooling capacityTotal power inputEERESEERCOOLING ONLY (EN14511 VALUE)Cooling capacityEERESEERCooling energy classHEATING ONLY (GROSS VALUE)Heating capacityTotal power inputCOPHEATING ONLY (EN14511 VALUE)Heating capacityCOPCooling energy classEXCHANGERSHEAT EXCHANGER USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER USER SIDE IN HEATINGWater flowPressure dropHEAT EXCHANGER SOURCE SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER SOURCE SIDE IN HEATINGWater flowPressure dropCOMPRESSORSCompressors nr.No. CircuitsNOISE LEVELNoise PowerNoise PressureSIZE AND WEIGHTABHOperating weightReversible heat pump, water source5,2 ÷ 33,4 kW SCROLL PLATES51WWR DHW2VersionsHEAT PUMPHEAT PUMPREVERSIBLEREVERSIBLEHEAT PUMPREVERSIBLEMain accessories? Wired room terminal with backlit display and of temperature and humidity probe? Extension module for system configuration? Electric heater of integration for the heating system? Electric heater for hot water cylinder, of integration and for anti-legionella? Cascade management kit? Serial card RS485 for ModBus? Buffer tank 35,100,200 liters? Hot water cylinder 300,500 liters? 300 litres thermal store for domestic hot water, for use with DOMH2O kit? 300,500,1000 litres thermal store for domestic hot water, with solar heat exchanger, for use with the DOMH2O kit? DOMH2O15 e DOMH2O24 kit for domestic hot water, with external heat exchanger plate-to-plate and pumpCommandsElectronic control Nadisystem provides great application flexibility. The remote keyboard kit wired indoor and outdoortemperature sensors allow dynamic control of delivery temperature water, optimizing comfort in the room andincreasing the energy efficiency. The electronic board allows you to manage:- wired remote control, back-lit display complete with remote temperature and humidity probe.- outdoor temperature sensor for water plant side modular set point compensation- a zone of direct heating for radiator, floor heating or fan coil- a zone with mix valve for floor heating- electrical heating element for possible integration and anti-legionella cycle for cylinder- boiler or electric heater in substitution or in addition- the room controller can customise up to six time bands. The presence of the programmable timer allows the creation of an operating profile containing up to 6 time bands.- up to 4 heat pump in cascade (with N-CM component)- several solutions through appropriate configurations of the controller and use of dedicated extension modules(accessorie), up to 5 zone.Features? Structure and base in hot galvanised epoxy powder coated steel? Case panels are insulated within low noise material for further improvement of silence? Rubber vibration damper? Hermetic scroll type compressors, equipped with the crankcase heater and thermal protection? Stainless steel (AISI 316) plate to plate exchanger (at the domestic hot water side) ensures with high efficiency and lowpressure drop. It is positioned next after the compressor and it ensures the domestic hot water production. This can workeither in full or in partial recovery, with the constant optimisation of efficiency through the advanced logic of the controller? Plant side exchanger with stainless steel AISI 316 plates that ensure high efficiency and low pressure drop. It meets thesupply of both hot or cold water, regardless of the domestic hot water? Source side exchanger with stainless steel (AISI 316) plates. It ensures high efficiency and low pressure drop? Soft starter for 230V/1/50Hz units (ms)? Phase sequence control relay for three phase models? The water circuit comes complete with:- Circulator for the 0011÷0061 models and centrifugal for the 0071÷0121 models, plant side.- Circulator for the 0011÷0091 models and centrifugal pump for the 0101÷0121 models, hot water side.- Modulating valve to reduce water consumption (source side).- Safety valve.- Expansion tank.- Manual filling assembly.- Drain valve on both plant and source circuits.- Pressure gauge.- Air vent valve.- Differential pressure switch on source side and system side.Unit descriptionsThe PRANA DHW2 water-cooled heat pump are reversible units for all year round operation in any operating mode: singlecycle (air conditioning, heating, domestic hot water) as well as combined cycle in total heat recovery (domestic hot watertogether with cooling). Energy efficiency is highest during the summer cycle, when, thanks to the full recovery of the heat,the production of hot water is free. During the combined use, the DHW exchanger uses the temperature of the dischargegases to gets inside the accumulation sanitary water as high as 65° C. The advanced electronic regulation developed byClimaveneta ensures the highest operational flexibility, fast working condition a significant increase in the overall COP, whichgo hand in hand with electricity and space reduction. Advantages, combined with the possibility of completely eliminating thetraditional boiler, making heat pumps PRANA DHW2 the ideal solution for energy saving applications in residential, hotel andsmall sector.WWR DHW2Reversible water/water heat pump domestic hot water production.WWR DHW2Remote key pad withtemperature andhumidity probe52 PRANA CATALOGUEReversible heat pump, total heat recovery,water source 5,1 ÷ 49,7 kWNoteWWR DHW2SCROLL PLATESHBA531 Plant (side) cooling exchanger water (in/out) 12°C/7°C; Source (side) heat exchanger water (in/out) 30°C/35°C2 Plant (side) heating exchanger water (in/out) 40°C/45°C; Source (side) heat exchanger water (in/out) 10°C/* °C (flow rate as in cooling)3 Plant (side) cooling exchanger water (in/out) 12°C/7°C; Plant (auxiliary side) heat exchanger recovery water (in/out) 45°C/50°C4 Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units;in compliance with ISO 3744 for non-certified units.5 Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level.6 Unit in standard configuration/execution, without optional accessories.WWR DHW2 0011 0025 0031 0041 0025 0031 0041 0061 0071 0091 0101 0121V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50(1) kW 5,10 7,70 8,90 11,0 7,70 8,80 10,9 16,1 21,7 24,6 28,0 34,8(1) kW 1,30 2,00 2,40 2,90 2,00 2,30 2,80 4,00 5,40 5,90 7,00 8,90(1) 3,92 3,85 3,71 3,79 3,85 3,83 3,89 4,03 4,02 4,17 4,00 3,91(1)(2) kW 5,93 9,09 10,5 12,9 8,98 10,4 12,8 18,7 25,1 28,2 32,4 40,2(2) kW 1,70 2,60 3,10 3,70 2,50 3,00 3,49 4,99 6,79 7,38 8,78 11,2(2) 3,49 3,50 3,39 3,49 3,59 3,47 3,67 3,75 3,70 3,82 3,69 3,59(3) kW 4,39 6,73 7,71 9,67 6,72 7,70 9,65 14,2 19,1 21,7 24,6 30,2(3) kW 1,68 2,57 3,11 3,64 2,56 3,02 3,57 5,00 6,85 7,44 8,83 11,2(3) kW 5,97 9,14 10,6 13,1 9,13 10,5 13,0 18,9 25,6 28,7 32,9 40,7(2) kW 5,93 9,09 10,5 12,9 8,98 10,4 12,8 18,7 25,1 28,2 32,4 40,2(2) kW 1,70 2,60 3,10 3,70 2,50 3,00 3,49 4,99 6,79 7,38 8,78 11,2(1) 0,88 1,33 1,53 1,89 1,33 1,51 1,88 2,77 3,74 4,24 4,82 5,99(1) kPa 6,70 12,2 16,2 17,2 12,2 15,9 16,9 18,6 26,8 22,3 28,6 29,3(2) 1,03 1,58 1,83 2,25 1,56 1,81 2,23 3,25 4,37 4,91 5,63 6,99(2) kPa 9,22 17,2 23,1 24,2 16,9 22,6 23,7 25,6 36,6 29,9 39,1 39,8(1) 1,09 1,66 1,93 2,38 1,66 1,90 2,34 3,44 4,64 5,22 5,99 7,48(1) kPa 10,4 19,1 25,8 27,1 19,1 24,9 26,3 28,6 41,3 33,9 44,1 45,6(2) 1,09 1,66 1,93 2,38 1,66 1,90 2,34 3,44 4,64 5,23 5,98 7,48(2) kPa 10,4 19,0 25,8 27,0 19,0 24,9 26,3 28,6 41,2 33,9 44,0 45,6(3) 1,04 1,59 1,85 2,28 1,59 1,83 2,26 3,29 4,45 4,99 5,72 7,07(3) kPa 9,36 17,5 23,6 24,8 17,4 23,2 24,4 26,1 37,9 31,0 40,2 40,7(3) 1,00 1,53 1,79 2,19 1,54 1,77 2,19 3,19 4,26 4,81 5,50 6,78(3) kPa 8,61 16,3 22,2 23,1 16,3 21,7 23,0 24,5 34,9 28,7 37,2 37,5N° 1 1 1 1 1 1 1 1 1 1 1 1N° 1 1 1 1 1 1 1 1 1 1 1 1(4) dB(A) 52 53 53 58 53 53 58 59 66 66 70 70(5) dB(A) 37 38 38 43 38 38 43 44 51 51 55 55(6) mm 845 845 845 845 845 845 845 845 845 845 845 845(6) mm 680 680 680 680 680 680 680 680 680 680 680 680(6) mm 1105 1105 1105 1105 1105 1105 1105 1105 1105 1105 1105 1105(6) kg 205 210 215 230 210 215 230 245 270 280 290 315Power supplyHYDRONIC TERMINALCOOLING ONLYCooling capacityTotal power inputEERESEERHEATING ONLYHeating capacityTotal power inputCOPCOOLING WITH TOTAL HEAT RECOVERYCooling capacity with total heat recoveryTotal power inputRecovery heat exchanger capacityTOTAL RECOVERY ONLYHeating capacityTotal power inputEXCHANGERSHEAT EXCHANGER USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER USER SIDE IN HEATINGWater flowPressure dropHEAT EXCHANGER SOURCE SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER SOURCE SIDE IN HEATINGWater flowPressure dropHEAT EXCHANGER RECOVERY USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER RECOVERY USER SIDE IN HEATINGWater flowPressure dropCOMPRESSORSCompressors nr.No. CircuitsNOISE LEVELNoise PowerNoise PressureSIZE AND WEIGHTABHOperating weightWWR DHW2NoteWWR DHW2HBA54 PRANA CATALOGUE1 Plant (side) cooling exchanger water (in/out) 23°C/18°C; Source (side) heat exchanger water (in/out) 30°C/35°C2 Plant (side) heating exchanger water (in/out) 30°C/35°C; Source (side) heat exchanger water (in/out) 10°C/* °C (flow rate as in cooling)3 Plant (side) cooling exchanger water (in/out) 23°C/18°C; Plant (auxiliary side) heat exchanger recovery water (in/out) 45°C/50°C4 Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units;in compliance with ISO 3744 for non-certified units.5 Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level.6 Unit in standard configuration/execution, without optional accessories.WWR DHW2 0011 0025 0031 0041 0025 0031 0041 0061 0071 0091 0101 0121V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50(1) kW 7,30 11,0 12,5 15,3 10,9 12,4 15,4 22,5 30,2 34,4 38,9 49,7(1) kW 1,30 2,00 2,40 2,90 1,90 2,30 2,80 4,10 5,50 6,10 7,30 9,30(1) 5,62 5,50 5,21 5,28 5,74 5,39 5,50 5,49 5,49 5,64 5,33 5,34(1)(2) kW 6,40 9,60 11,1 13,7 9,51 11,0 13,5 19,8 26,7 30,1 34,5 43,1(2) kW 1,30 2,00 2,40 2,90 2,00 2,30 2,80 4,00 5,40 5,90 7,00 8,90(2) 4,92 4,80 4,63 4,72 4,76 4,78 4,82 4,95 4,94 5,10 4,93 4,84(3) kW 5,99 9,15 10,3 12,9 9,04 10,3 13,0 18,8 25,5 29,0 32,7 41,0(3) kW 1,90 2,84 3,42 4,14 2,84 3,34 4,07 5,70 7,71 8,45 10,2 12,7(3) kW 7,78 11,8 13,5 16,8 11,7 13,4 16,9 24,2 32,8 36,9 42,3 53,0(2) kW 6,40 9,60 11,1 13,7 9,51 11,0 13,5 19,8 26,7 30,1 34,5 43,1(2) kW 1,30 2,00 2,40 2,90 2,00 2,30 2,80 4,00 5,40 5,90 7,00 8,90(1) 1,26 1,90 2,16 2,64 1,88 2,14 2,66 3,88 5,21 5,94 6,71 8,58(1) kPa 13,8 24,9 32,2 33,4 24,5 31,7 33,8 36,4 52,1 43,8 55,5 60,0(2) 1,11 1,66 1,92 2,38 1,65 1,90 2,34 3,42 4,63 5,22 5,98 7,47(2) kPa 10,7 19,2 25,5 27,0 18,8 24,9 26,3 28,3 41,2 33,8 44,0 45,5(1) 1,48 2,23 2,56 3,12 2,20 2,52 3,12 4,56 6,13 6,95 7,93 10,1(1) kPa 18,9 34,4 45,2 46,7 33,4 44,0 46,7 50,3 72,0 60,1 77,3 83,5(2) 1,48 2,23 2,56 3,12 2,20 2,52 3,12 4,57 6,13 6,96 7,92 10,1(2) kPa 18,9 34,4 45,2 46,6 33,4 44,1 46,7 50,4 72,0 60,2 77,1 83,5(3) 1,35 2,06 2,35 2,93 2,04 2,34 2,94 4,21 5,71 6,42 7,36 9,23(3) kPa 15,9 29,3 38,3 41,0 28,7 37,9 41,2 42,8 62,5 51,3 66,7 69,5(3) 1,01 1,55 1,81 2,22 1,55 1,79 2,22 3,23 4,32 4,87 5,57 6,88(3) kPa 8,80 16,7 22,7 23,6 16,7 22,2 23,6 25,2 35,8 29,5 38,1 38,5N° 1 1 1 1 1 1 1 1 1 1 1 1N° 1 1 1 1 1 1 1 1 1 1 1 1(4) dB(A) 52 53 53 58 53 53 58 59 66 66 70 70(5) dB(A) 37 38 38 43 38 38 43 44 51 51 55 55(6) mm 845 845 845 845 845 845 845 845 845 845 845 845(6) mm 680 680 680 680 680 680 680 680 680 680 680 680(6) mm 1105 1105 1105 1105 1105 1105 1105 1105 1105 1105 1105 1105(6) kg 205 210 215 230 210 215 230 245 270 280 290 315Power supplyFLOOR HEATINGCOOLING ONLYCooling capacityTotal power inputEERESEERHEATING ONLYHeating capacityTotal power inputCOPCOOLING WITH TOTAL HEAT RECOVERYCooling capacity with total heat recoveryTotal power inputRecovery heat exchanger capacityTOTAL RECOVERY ONLYHeating capacityTotal power inputEXCHANGERSHEAT EXCHANGER USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER USER SIDE IN HEATINGWater flowPressure dropHEAT EXCHANGER SOURCE SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER SOURCE SIDE IN HEATINGWater flowPressure dropHEAT EXCHANGER RECOVERY USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER RECOVERY USER SIDE IN HEATINGWater flowPressure dropCOMPRESSORSCompressors nr.No. CircuitsNOISE LEVELNoise PowerNoise PressureSIZE AND WEIGHTABHOperating weightReversible heat pump, total heat recovery,water source 5,1 ÷ 49,7 kW SCROLL PLATES55BWR MTD2BWR MTD2Reversible heat pump, geothermal source, for water heating up to 55°Cand domestic hot water production.HEATING COOLING HOT WATERVersionsMain accessories? Wired room terminal with backlit display and temperature and humidity probe? Extension module for system configuration? Three-way valve for domestic hot water? Electric heater of integration for the heating system? Electric heater for hot water cylinder, of integration and for anti-legionella? Cascade management kit? Serial card RS485 for ModBus? Buffer tank 35,100,200 liters? Hot water cylinder 300,500 liters? 300 litres thermal store for domestic hot water, for use with the DOMH2O kit? 300,500,1000 litres thermal store for domestic hot water with solar heat exchanger, for use with theDOMH2O kit? DOMH2O15 e DOMH2O24 kit for domestic hot water with external heat exchanger plate-to-plate andpumpCommandsElectronic control Nadisystem provides great application flexibility. The remote keyboard kit wired indoor andoutdoor temperature sensors allow dynamic control of delivery temperature water, optimizing comfort in theroom and increasing the energy efficiency. The electronic board allows you to manage:- wired remote control, back-lit display complete with remote temperature and humidity probe.- outdoor temperature sensor for water plant side modular set point compensation- a zone of direct heating for radiator, floor heating or fan coil- domestic hot water production by external three-way valve (accessory)- electrical heating element for possible integration and anti-legionella cycle for cylinder- boiler or electric heater in substitution or in addition- the room controller can customise up to six time bands. The presence of the programmable timer allows the creation of an operating profile containing up to 6 time bands.- up to 4 heat pump in cascade (with N-CM component)- several solutions through appropriate configurations of the controller and use of dedicated extension modules (accessorie), up to 5 zone.Features? Structure and base in hot galvanised epoxy powder coated steel.? High-efficiency plate exchangers in AISI 316 stainless steel with low pressure drops, fitted with heatingelement for frost protection.? Hermetic scroll type compressors, equipped with the crankcase heater and thermal protection? Case panels are insulated within low noise material for further improvement of silence? Rubber vibration damper? Soft starter for 230V/1/50Hz units (ms)? Phase sequence control relay for three phase models? The water circuit comes complete with:- Variable flow circulator for 0011÷0061 models and centrifugal variable flow pump formodels 0071÷0121, plant side.- Variable flow circulator for 0011÷0031 models, centrifugal variable flow pump for models 0041÷0121on source side (for geothermal systems, closed vertical or horizontal loops).- Safety valve.- Expansion tank.- Manual filling assembly- Pressure gauge.- Air vent valve.- Drain valve on both plant and source circuits.- Differential pressure switch on source side and system side.Unit descriptionsThe MTD2 heat pump optimized for geothermal systems are reversible units for heating, cooling and domestic hotwater by external three-way valve (accessory). Both heat pumps MTD2 are suitable for traditional heatingsystemsand radiant panels. The latter, working with water at lower temperatures, ensure a higher yield and are aparticularly appreciated for new buildings with low energy consumption that point on using renewable energyresources. The installation is greatly simplified through the integration of the group simply by connecting the unitto water plant and electricity so that it can be put into operation.BWR MTD2Remote key pad withtemperature andhumidity probe56 PRANA CATALOGUEHBAReversible heat pump, geothermal source5,1 ÷ 32,6 kWNoteBWR MTD2SCROLL PLATES571 Plant (side) cooling exchanger water (in/out) 12°C/7°C; Source (side) heat exchanger water (in/out) 30°C/35°C2 Values in compliance with EN14511-3:20113 Plant (side) heating exchanger water (in/out) 40°C/45°C; Source (side) heat exchanger water (in/out) 0°C/-3°C (Gly 225%)4 Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units;in compliance with ISO 3744 for non-certified units.5 Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level.6 Unit in standard configuration/execution, without optional accessories.BWR MTD2 0011 0025 0031 0041 0025 0031 0041 0061 0071 0091 0101 0121V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50(1) kW 5,10 7,00 8,60 11,0 7,20 8,70 11,5 15,4 19,4 22,4 25,4 32,6(1) kW 1,60 2,00 2,60 3,20 1,90 2,50 3,30 4,10 5,10 5,90 6,90 8,60(1) 3,19 3,50 3,31 3,44 3,79 3,48 3,48 3,76 3,80 3,80 3,68 3,79(1) 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00(1)(2) kW 5,11 7,01 8,63 11,0 7,21 8,73 11,5 15,4 19,5 22,5 25,6 32,8(1)(2) 2,80 2,98 2,79 2,78 3,21 2,92 2,83 3,24 3,17 3,28 3,12 3,36(1)(2) 2,95 3,17 2,96 2,88 3,42 3,07 2,98 3,38 3,32 3,41 3,26 3,49G F G G F G G F F F F F(3) kW 5,20 7,10 9,00 11,3 7,00 8,70 11,8 15,2 18,8 21,8 25,1 31,9(3) kW 1,70 2,30 3,00 3,60 2,20 2,70 3,70 4,40 5,60 6,20 7,40 9,00(3) 3,06 3,09 3,00 3,14 3,18 3,22 3,19 3,45 3,36 3,52 3,39 3,54(3) kW 5,19 7,09 8,97 11,3 6,99 8,67 11,8 15,2 18,7 21,7 24,9 31,7(3) 2,70 2,67 2,57 2,78 3,21 2,92 2,83 3,24 3,17 3,28 3,12 3,36(3) G G G G G G G F G F G F(1) 0,88 1,21 1,48 1,89 1,24 1,50 1,98 2,65 3,34 3,86 4,37 5,61(1) kPa 7,23 10,7 15,9 18,0 11,4 16,3 19,6 20,7 22,7 19,6 26,3 27,1(3) 0,90 1,23 1,56 1,96 1,22 1,51 2,05 2,64 3,27 3,79 4,36 5,54(3) kPa 7,65 11,3 17,7 19,3 10,9 16,6 21,0 20,6 21,7 18,9 26,1 26,4(1) 1,22 1,64 2,05 2,59 1,66 2,05 2,70 3,57 4,48 5,18 5,91 7,53(1) kPa 16,3 23,3 35,2 39,1 23,8 35,3 42,5 43,6 47,5 40,9 55,6 56,7(3) 1,13 1,55 1,94 2,49 1,55 1,93 2,61 3,47 4,25 5,01 5,70 7,36(3) kPa 13,9 20,6 31,7 35,9 20,6 31,5 39,7 41,3 42,7 38,4 51,7 54,0N° 1 1 1 1 1 1 1 1 1 1 1 1N° 1 1 1 1 1 1 1 1 1 1 1 1(4) dB(A) 52 53 53 58 53 53 58 59 66 66 70 70(5) dB(A) 37 38 38 43 38 38 43 44 51 51 55 55(6) mm 845 845 845 845 845 845 845 845 845 845 845 845(6) mm 680 680 680 680 680 680 680 680 680 680 680 680(6) mm 1105 1105 1105 1105 1105 1105 1105 1105 1105 1105 1105 1105(6) kg 188 190 195 210 190 195 210 225 230 245 250 270Power supplyHYDRONIC TERMINALCOOLING ONLY (GROSS VALUE)Cooling capacityTotal power inputEERESEERCOOLING ONLY (EN14511 VALUE)Cooling capacityEERESEERCooling energy classHEATING ONLY (GROSS VALUE)Heating capacityTotal power inputCOPHEATING ONLY (EN14511 VALUE)Heating capacityCOPCooling energy classEXCHANGERSHEAT EXCHANGER USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER USER SIDE IN HEATINGWater flowPressure dropHEAT EXCHANGER SOURCE SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER SOURCE SIDE IN HEATINGWater flowPressure dropCOMPRESSORSCompressors nr.No. CircuitsNOISE LEVELNoise PowerNoise PressureSIZE AND WEIGHTABHOperating weightHBABWR MTD2NoteBWR MTD258 PRANA CATALOGUE1 Plant (side) cooling exchanger water (in/out) 12°C/7°C; Source (side) heat exchanger water (in/out) 30°C/35°C2 Values in compliance with EN14511-3:20113 Plant (side) heating exchanger water (in/out) 40°C/45°C; Source (side) heat exchanger water (in/out) 0°C/-3°C (Gly 225%)4 Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units;in compliance with ISO 3744 for non-certified units.5 Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level.6 Unit in standard configuration/execution, without optional accessories.BWR MTD2 0011 0025 0031 0041 0025 0031 0041 0061 0071 0091 0101 0121V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50(1) kW 7,00 9,60 11,7 14,7 9,30 11,8 15,4 20,8 26,3 30,0 34,0 43,8(1) kW 1,60 2,00 2,60 3,30 1,90 2,50 3,40 4,20 5,30 6,10 7,10 8,90(1) 4,38 4,80 4,50 4,45 4,89 4,72 4,53 4,95 4,96 4,92 4,79 4,92(1) 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00(1)(2) kW 7,01 9,61 11,7 14,7 9,31 11,8 15,4 20,8 26,4 30,1 34,2 44,0(1)(2) 3,87 4,12 3,79 3,58 4,17 3,91 3,65 4,24 4,13 4,25 4,08 4,35(1)(2) 2,95 3,17 2,96 2,88 3,42 3,07 2,98 3,38 3,32 3,41 3,26 3,49G F G G F G G F F F F E(3) kW 5,40 7,30 9,20 11,7 7,50 9,10 12,2 15,9 19,7 22,9 26,4 33,2(3) kW 1,30 1,80 2,30 2,80 1,70 2,10 2,80 3,50 4,40 4,90 5,80 7,30(3) 4,15 4,06 4,00 4,18 4,41 4,33 4,36 4,54 4,48 4,67 4,55 4,55(3) kW 5,39 7,29 9,17 11,7 7,49 9,07 12,2 15,9 19,6 22,8 26,2 33,0(3) 3,53 3,40 3,29 3,26 3,67 3,50 3,39 3,80 3,54 3,87 3,69 3,89(3) E G F F E E F D E D E D(1) 1,21 1,66 2,02 2,54 1,60 2,04 2,66 3,59 4,54 5,18 5,87 7,56(1) kPa 13,7 20,3 29,5 32,2 19,1 30,1 35,4 38,0 41,9 35,3 47,3 49,1(3) 0,94 1,26 1,59 2,03 1,30 1,58 2,11 2,75 3,41 3,97 4,57 5,75(3) kPa 8,20 11,8 18,4 20,6 12,5 18,0 22,3 22,4 23,7 20,7 28,7 28,4(1) 1,57 2,13 2,62 3,30 2,05 2,62 3,44 4,58 5,79 6,62 7,53 9,66(1) kPa 27,0 38,8 57,7 63,2 36,2 57,8 68,9 71,9 79,4 66,9 90,4 93,2(3) 1,31 1,76 2,21 2,85 1,85 2,24 3,00 3,96 4,89 5,74 6,58 8,27(3) kPa 18,7 26,6 41,1 47,1 29,5 42,1 52,4 53,6 56,4 50,4 68,9 68,2N° 1 1 1 1 1 1 1 1 1 1 1 1N° 1 1 1 1 1 1 1 1 1 1 1 1(4) dB(A) 52 53 53 58 53 53 58 59 66 66 70 70(5) dB(A) 37 38 38 43 38 38 43 44 51 51 55 55(6) mm 845 845 845 845 845 845 845 845 845 845 845 845(6) mm 680 680 680 680 680 680 680 680 680 680 680 680(6) mm 1105 1105 1105 1105 1105 1105 1105 1105 1105 1105 1105 1105(6) kg 188 190 195 210 190 195 210 225 230 245 250 270Power supplyFLOOR HEATINGCOOLING ONLY (GROSS VALUE)Cooling capacityTotal power inputEERESEERCOOLING ONLY (EN14511 VALUE)Cooling capacityEERESEERCooling energy classHEATING ONLY (GROSS VALUE)Heating capacityTotal power inputCOPHEATING ONLY (EN14511 VALUE)Heating capacityCOPCooling energy classEXCHANGERSHEAT EXCHANGER USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER USER SIDE IN HEATINGWater flowPressure dropHEAT EXCHANGER SOURCE SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER SOURCE SIDE IN HEATINGWater flowPressure dropCOMPRESSORSCompressors nr.No. CircuitsNOISE LEVELNoise PowerNoise PressureSIZE AND WEIGHTABHOperating weightReversible heat pump, geothermal source5,1 ÷ 32,6 kW SCROLL PLATES59BWR DHW2VersionsHEAT PUMPHEAT PUMPREVERSIBLEREVERSIBLEHEAT PUMPREVERSIBLEMain accessories? Wired room terminal with backlit display, with temperature and humidity probe? Extension module for system configuration? Electric heater of integration for the heating system? Electric heater for hot water cylinder, of integration and for anti-legionella? Cascade management kit? Serial card RS485 for ModBus? Buffer tank 35,100,200 liters? Hot water cylinder 300,500 liters? 300 litres thermal store for domestic hot water, for use with DOMH2O kit? 300,500,1000 litres thermal store for domestic hot water with solar heat exchanger, for use with kit DOMH2O? DOMH2O15 e DOMH2O24 kit for domestic hot water with external heat exchanger plate-to-plate and pumpCommandsElectronic control Nadisystem provides great application flexibility. The remote keyboard kit wired indoor and outdoortemperature sensors allow dynamic control of delivery temperature water, optimizing comfort in the room andincreasing the energy efficiency. The electronic board allows you to manage:- wired remote control, back-lit display complete with remote temperature and humidity probe.- outdoor temperature sensor for water plant side modular set point compensation- a zone of direct heating for radiator, floor heating or fan coil- a zone with mix valve for floor heating- electrical heating element for possible integration and anti-legionella cycle for cylinder- boiler or electric heater in substitution or in addition- the room controller can customise up to six time bands. The presence of the programmable timer allows the creationof an operating profile containing up to 6 time bands.- up to 4 heat pump in cascade (with N-CM component)- several solutions through appropriate configurations of the controller and use of dedicated extension modules(accessorie), up to 5 zone.Features? Structure and base in hot galvanised epoxy powder coated steel.? Case panels are insulated within low noise material for further improvement of silence? Rubber vibration damper.? Hermetic scroll type compressors, equipped with the crankcase heater and thermal protection? High efficiency stainless steel (AISI 316) plate to plate exchanger (at the domestic hot water side), with lowpressure drop. It is positioned next after the compressor and it ensures domestic hot water production. That canwork either in full recovery or in part, with the constant optimization of efficiency through logic advanced adjustingcontroller? High-efficiency plates exchanger in AISI 316 stainless steel with low pressure drops. It meets the supply of bothhot or cold water for the facility, regardless of the domestic hot water? High efficiency stainless steel (AISI 316)plate exchanger (source side), with low pressure drop ? Soft starter for 230V/1/50Hz units (ms)? Phase sequence control relay for three phase models? The water circuit comes complete with:- Circulator for the 0011÷0061 models and centrifugal for the 0071÷0121 models, plant side- Circulator for the 0011÷0091 models and centrifugal pump for the 0101÷0121 models, hot water side- Circulator for 0011÷0031 models, centrifugal flow pump for models 0041÷0121, on source side(for vertical loops or horizontal loops)- Safety valve.- Expansion tank.- Manual filling assembly.- Drain valve on both plant and source circuits.- Pressure gauge.- Air vent valve.- Differential pressure switch on source side and system side.Unit descriptionsThe PRANA DHW2 heat pump optimized for geothermal systems are reversible units for all year round operation in anyoperating mode: single cycle (air conditioning, heating, domestic hot water) as well as combined cycle in total heatrecovery (domestic hot water together with cooling). Energy efficiency is highest during the summer cycle, when,thanks to the full recovery of the heat, the production of hot water is free. During the combined use, the DHWexchanger uses the temperature of the discharge gases to gets inside the accumulation sanitary water as high as 65°C. The advanced electronic regulation developed by Climaveneta ensures the highest operational flexibility, fast workingcondition a significant increase in the overall COP, which go hand in hand with electricity and space reduction.Advantages, combined with the possibility of completely eliminating the traditional boiler, making heat pumps PRANADHW2 the ideal solution for energy saving applications in residential, hotel and small sector.BWR DHW2Reversible heat pump, with domestic hot water production and total heat recovery.BWR DHW2Remote key pad withtemperature andhumidity probe60 PRANA CATALOGUEReversible heat pump, total heat recovery,geothermal source 5,0 ÷ 34,0 kWNoteBWR DHW2SCROLL PLATESHBA611 Plant (side) cooling exchanger water (in/out) 12°C/7°C; Source (side) heat exchanger water (in/out) 30°C/35°C2 Plant (side) heating exchanger water (in/out) 40°C/45°C; Source (side) heat exchanger water (in/out) 0°C/-3°C (Gly 225%)3 Plant (side) cooling exchanger water (in/out) 12°C/7°C; Plant (auxiliary side) heat exchanger recovery water (in/out) 45°C/50°C4 Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units;in compliance with ISO 3744 for non-certified units.5 Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level.6 Unit in standard configuration/execution, without optional accessories.BWR DHW2 0011 0025 0031 0041 0025 0031 0041 0061 0071 0091 0101 0121V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50(1) kW 5,00 7,50 8,70 10,7 7,50 8,60 10,6 15,7 21,2 24,0 27,3 34,0(1) kW 1,40 2,00 2,50 2,90 2,00 2,40 2,80 4,00 5,50 6,00 7,10 9,10(1) 3,57 3,75 3,48 3,69 3,75 3,58 3,79 3,92 3,85 4,00 3,85 3,74(1)(2) kW 4,30 6,60 7,70 9,40 6,50 7,50 9,30 13,3 17,9 20,5 23,5 28,4(2) kW 1,70 2,50 3,00 3,50 2,40 2,90 3,40 4,70 6,50 7,00 8,30 10,5(2) 2,53 2,64 2,57 2,69 2,71 2,59 2,74 2,83 2,75 2,93 2,83 2,70(3) kW 4,39 6,73 7,71 9,67 6,72 7,70 9,65 14,2 19,1 21,7 24,6 30,2(3) kW 1,68 2,57 3,11 3,64 2,56 3,02 3,57 5,00 6,85 7,44 8,83 11,2(3) kW 5,97 9,14 10,6 13,1 9,13 10,5 13,0 18,9 25,6 28,7 32,9 40,7(2) kW 4,30 6,60 7,70 9,40 6,50 7,50 9,30 13,3 17,9 20,5 23,5 28,4(2) kW 1,70 2,50 3,00 3,50 2,40 2,90 3,40 4,70 6,50 7,00 8,30 10,5(1) 0,86 1,29 1,50 1,84 1,29 1,48 1,82 2,70 3,65 4,13 4,70 5,85(1) kPa 6,44 11,5 15,5 16,2 11,5 15,2 15,9 17,6 25,5 21,2 27,2 27,9(2) 0,75 1,15 1,34 1,63 1,13 1,30 1,62 2,31 3,11 3,56 4,08 4,93(2) kPa 4,85 9,10 12,4 12,8 8,82 11,7 12,5 12,9 18,5 15,8 20,5 19,8(1) 1,17 1,74 2,05 2,49 1,74 2,01 2,45 3,60 4,88 5,49 6,29 7,88(1) kPa 13,8 24,3 33,7 34,4 24,3 32,5 33,4 36,4 53,1 43,5 56,6 58,8(2) 0,85 1,33 1,53 1,92 1,33 1,50 1,92 2,79 3,70 4,37 4,93 5,82(2) kPa 7,25 14,3 18,8 20,4 14,3 18,0 20,4 21,8 30,5 27,5 34,7 32,0(3) 1,04 1,59 1,85 2,28 1,59 1,83 2,26 3,29 4,45 4,99 5,72 7,07(3) kPa 9,36 17,5 23,6 24,8 17,4 23,2 24,4 26,1 37,9 31,0 40,2 40,7(3) 0,73 1,13 1,34 1,61 1,12 1,30 1,61 2,28 3,03 3,51 4,00 4,83(3) kPa 4,68 8,86 12,4 12,4 8,69 11,7 12,4 12,6 17,6 15,3 19,7 19,0N° 1 1 1 1 1 1 1 1 1 1 1 1N° 1 1 1 1 1 1 1 1 1 1 1 1(4) dB(A) 52 53 53 58 53 53 58 59 66 66 70 70(5) dB(A) 37 38 38 43 38 38 43 44 51 51 55 55(6) mm 845 845 845 845 845 845 845 845 845 845 845 845(6) mm 680 680 680 680 680 680 680 680 680 680 680 680(6) mm 1105 1105 1105 1105 1105 1105 1105 1105 1105 1105 1105 1105(6) kg 205 210 215 230 210 215 230 245 270 280 290 315Power supplyHYDRONIC TERMINALCOOLING ONLYCooling capacityTotal power inputEERESEERHEATING ONLYHeating capacityTotal power inputCOPCOOLING WITH TOTAL HEAT RECOVERYCooling capacity with total heat recoveryTotal power inputRecovery heat exchanger capacityTOTAL RECOVERY ONLYHeating capacityTotal power inputEXCHANGERSHEAT EXCHANGER USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER USER SIDE IN HEATINGWater flowPressure dropHEAT EXCHANGER SOURCE SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER SOURCE SIDE IN HEATINGWater flowPressure dropHEAT EXCHANGER RECOVERY USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER RECOVERY USER SIDE IN HEATINGWater flowPressure dropCOMPRESSORSCompressors nr.No. CircuitsNOISE LEVELNoise PowerNoise PressureSIZE AND WEIGHTABHOperating weightBWR DHW2NoteBWR DHW2HBA62 PRANA CATALOGUE1 Plant (side) cooling exchanger water (in/out) 23°C/18°C; Source (side) heat exchanger water (in/out) 30°C/35°C2 Plant (side) heating exchanger water (in/out) 30°C/35°C; Source (side) heat exchanger water (in/out) 0°C/-3°C (Gly 225%)3 Plant (side) cooling exchanger water (in/out) 23°C/18°C; Plant (auxiliary side) heat exchanger recovery water (in/out) 45°C/50°C4 Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units;in compliance with ISO 3744 for non-certified units.5 Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level.6 Unit in standard configuration/execution, without optional accessories.BWR DHW2 0011 0025 0031 0041 0025 0031 0041 0061 0071 0091 0101 0121V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50(1) kW 7,12 10,7 12,3 15,0 10,7 12,2 15,0 21,9 29,5 33,6 38,0 48,6(1) kW 1,39 1,96 2,47 2,89 1,96 2,37 2,82 4,10 5,57 6,21 7,38 9,45(1) 5,12 5,46 4,98 5,19 5,46 5,15 5,32 5,34 5,30 5,41 5,15 5,14(1)(2) kW 4,41 6,76 7,83 9,68 6,65 7,63 9,50 13,8 18,8 21,2 24,4 29,7(2) kW 1,32 1,94 2,33 2,76 1,86 2,26 2,69 3,74 5,11 5,60 6,57 8,29(2) 3,34 3,48 3,36 3,51 3,58 3,38 3,53 3,69 3,68 3,79 3,71 3,58(3) kW 6,42 9,77 11,0 13,8 9,70 11,1 13,8 20,0 27,2 30,8 34,9 44,1(3) kW 1,68 2,51 3,05 3,66 2,51 2,97 3,62 5,10 6,88 7,60 9,12 11,5(3) kW 8,00 12,1 13,9 17,2 12,1 13,9 17,2 24,8 33,7 38,0 43,5 54,9(2) kW 4,41 6,76 7,83 9,68 6,65 7,63 9,50 13,8 18,8 21,2 24,4 29,7(2) kW 1,32 1,94 2,33 2,76 1,86 2,26 2,69 3,74 5,11 5,60 6,57 8,29(1) 1,23 1,84 2,12 2,58 1,84 2,10 2,59 3,79 5,09 5,80 6,56 8,40(1) kPa 13,1 23,5 31,1 31,9 23,5 30,6 32,0 34,6 49,6 41,7 52,9 57,5(2) 0,76 1,17 1,36 1,68 1,15 1,32 1,64 2,39 3,26 3,67 4,22 5,15(2) kPa 5,06 9,49 12,7 13,5 9,17 12,1 12,9 13,8 20,3 16,7 21,9 21,6(1) 1,56 2,32 2,70 3,27 2,32 2,67 3,27 4,78 6,43 7,30 8,32 10,7(1) kPa 24,6 43,2 58,8 59,6 43,3 57,3 59,4 64,0 92,0 76,9 99,0 107(2) 0,99 1,55 1,77 2,23 1,54 1,73 2,19 3,22 4,40 5,00 5,72 6,89(2) kPa 9,96 19,3 25,2 27,6 19,0 24,0 26,6 29,1 43,0 36,1 46,6 44,9(3) 1,39 2,11 2,42 3,00 2,10 2,41 3,00 4,31 5,86 6,60 7,56 9,54(3) kPa 16,8 30,8 40,5 42,9 30,4 40,1 42,9 44,8 65,8 54,1 70,3 74,2(3) 0,73 1,13 1,34 1,61 1,12 1,30 1,61 2,28 3,03 3,51 4,00 4,83(3) kPa 4,68 8,86 12,4 12,4 8,69 11,7 12,4 12,6 17,6 15,3 19,7 19,0N° 1 1 1 1 1 1 1 1 1 1 1 1N° 1 1 1 1 1 1 1 1 1 1 1 1(4) dB(A) 52 53 53 58 53 53 58 59 66 66 70 70(5) dB(A) 37 38 38 43 38 38 43 44 51 51 55 55(6) mm 845 845 845 845 845 845 845 845 845 845 845 845(6) mm 680 680 680 680 680 680 680 680 680 680 680 680(6) mm 1105 1105 1105 1105 1105 1105 1105 1105 1105 1105 1105 1105(6) kg 205 210 215 230 210 215 230 245 270 280 290 315Power supplyFLOOR HEATINGCOOLING ONLYCooling capacityTotal power inputEERESEERHEATING ONLYHeating capacityTotal power inputCOPCOOLING WITH TOTAL HEAT RECOVERYCooling capacity with total heat recoveryTotal power inputRecovery heat exchanger capacityTOTAL RECOVERY ONLYHeating capacityTotal power inputEXCHANGERSHEAT EXCHANGER USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER USER SIDE IN HEATINGWater flowPressure dropHEAT EXCHANGER SOURCE SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER SOURCE SIDE IN HEATINGWater flowPressure dropHEAT EXCHANGER RECOVERY USER SIDE IN REFRIGERATIONWater flowPressure dropHEAT EXCHANGER RECOVERY USER SIDE IN HEATINGWater flowPressure dropCOMPRESSORSCompressors nr.No. CircuitsNOISE LEVELNoise PowerNoise PressureSIZE AND WEIGHTABHOperating weightReversible heat pump, total heat recovery,geothermal source 5,0 ÷ 34,0 kW SCROLL PLATES63SHAOCAMain accessories? ESP electrostatic air cleaner kit? US300 ultrasounds humidifier kit? EHD electric heater kit? THW humidity probe, wall mountingCommandsThe controller offers advanced functions and algorithms. The keypad is generously sized with full operating statusdisplay. The commands and detailed LCD display make access to the units settings easy and safe. These resourcesallow to consult and intervene on the unit by means of a multi-level menu. The diagnostics includes a complete alarmmanagement, with alarm logging functions for enhanced analysis of the unit operation. Availability of an internal realtime clock for operation scheduling (up to 3 time belts). The unit, under the control of the microprocessor, is able tofunction as renewal air with cooling and dehumidifier in summer, renewal air with heating in winter, fresh air withthermodynamic recovery in summer and winter, free cooling and recirculating fan only.Features? The supporting structure and external panels are in hot-dip galvanised sheet steel. The air treatment zoneis fully lined with polyethylene foam to guarantee both high thermal and acoustic insulation.? A condense collecting tray within the water discharge? Refrigerant circuit consisting in the standard version of a thermostat with external valve for internalpressure relief, 4-way valve, high/low pressure safety pressure switch, liquid sight glass and dehydratingfilter.? Hermetic rotary type compressors, equipped with the thermal protection? Unit's coils guarantee high efficient thermal exchange with low pressure drop. Finned unit coils are madeof copper tubes and high exchange surface area aluminium fins (100% fully quality tested).? Modulating supply and exhaust fans with backward curved Fan, 'plug-fan' type, with a directly coupledEC motor that enables low energy consumption.? Dampers are integrated in the unit for the recirculation and fresh air G4 efficiency air filters, intake andoulet, wihich may be easily removed from bottom and top side of the unit for periodic cleaning.? Indoor unit brackets and rubber vibration damper included.Unit descriptionsThe SHAOCA unit is a controlled mechanical ventilation system that guarantees air renewal and purification inbuildings with an appropriate temperature, using an in-built refrigerant circuit. The heat pump technology enablesto use the energy absorbed from vitiated air to heat or cool outdoor air, recovering energy that would beotherwise lost outside. The active thermodynamic recovery allows to reduce the air renewal load - with a highenergy efficiency- providing part of the thermal requirements of the building whilst maintaining total comfortconditions all year round. In Summer the outdoor air cooling enables to reduce humidity, making the installationof a dehumidifier in radiant systems unnecessary. During middle seasons, the air intake is costless thanks to theFree Cooling system, keeping only the EC fan motor running . The SHAOCA unit reaches a higher energy-efficiency class, increasing the current and future value of the building. To complete the range of products for thecontrolled mechanical ventilation system, Climaveneta also offers electrostatic filters for a high efficiency filtrationof noxious elements, together with a dehumidifier that ensures humidity control even in Winter.SHAOCA64 PRANA CATALOGUEHBAFresh air unit with activethermodynamic recovery, indoorinstallation 250 ÷ 600 m3/hNoteSHAOCAROTATIVE FREE COOLINGTERMODYNAMIC EC FAN HEATING COOLING651 Outdoor air temperature 35°C b.s./ 24°C b.u., Indoor air temperature 27°C b.s./ 19°C b.u.2 Outdoor air temperature 7°C b.s./ 6°C b.u., Indoor air temperature 20°C b.s./15°C b.u.3 Sound power on the basis of measurements made in compliance with ISO 9614Unit in standard configuration/execution, without optional accessories.SHAOCA 25 40 60Nominal air flow m3/h 250 400 600Nominal useful head Pa 50 50 50Nominal Heating power (1) kW 2,71 3,44 4,41Total absorbed power (1) kW 0,75 0,95 1,25EER (1) 3,61 3,62 3,53Cooling capacity (2) kW 2,60 3,32 4,57Total absorbed power (2) kW 0,58 0,74 1,08COP (2) 4,47 4,49 4,23Compressor type Rotary Rotary RotaryN° Compressors 1 1 1Refrigerant R410A R410A R410AElectrical power supply V-Ph~Hz 230-1~50 230-1~50 230-1~50Sound power (3) 53 56 56DIMENSIONSB mm 752 752 752H mm 349 349 349A mm 1200 1200 1200CLIMAVENETASustainable ComfortEnvironmental respect,specific solutions andmaximum return oninvestment.In two words:Sustainable ComfortThe highest comfort and the minimum environmental impact on the whole building; this is the mission of Climaveneta. Climaveneta is aware that technological systems are amongst the most crucial elements in modern buildings and urban design. The usability, energy efficiency and environmental sustainability of our surroundings as well as the health and well-being of the people, who spend their time there, depend upon these systems.No matter whether it is an industrial application, an office space, residential building or leisure centre; it is not just comfort that is the only requirement. It is a matter of flexibility and care, adapting the system to the requirements of each building, application and the user's needs.This is how Climaveneta considers sustainable comfort: the best solution to meet the stakeholder's expectations ensuring comfort, maximum energy efficiency, optimized investments, highest standard of environmental respect and innovative air conditioning and heating solutions.Environmental respectDecreasing energy consumption, the systematic reduction of atmospheric emissions and the extensive use of renewable sources.Highest R.O.I.Thanks to innovative solutions that simplify the system and ensure high energy efficiency, low maintenance and longer life cycle of the product.Experience40 years of leading experience in the development of efficient units for air conditioning and heating.InnovationThrough the development of cutting-edge and efficient solutions with the contribution and close collaboration with suppliers and experts.Specific solutionfor each projectThrough a wide range of highly configurable products and systems, combined withcustomized solutions.66 PRANA CATALOGUE Sometimes numbers say more than a thousand words1st1,1505thEuropean for CentralAir Conditioning245Millions € turnover 2012employees worldwidein the World inCentral Air Conditioning990,0002 to 2,400 kWhubfactoriesComplete range of productsfromm2 production facilitiesEstablished in 1971 Bassano del Grappa (Italy)Since 1994 a De’Longhi Group companySince 2012 a DeLclima CompanyHead office and foreign branches- Climaveneta Spa, Italia- Climaveneta France- Climaveneta Deutschland GmbH- Climaveneta España - Top Clima- Climaveneta Polska Sp.z o.o.- Climaveneta Chat Union Refrig. Equipment Co Ltd in China- Climaveneta India ClimateTechnologies (P) LTD- Climaveneta UK LTDDistributorsin more than 180 countries of the world for a truly complete market coverage.Serviceassured in all countries through the assistance network of our subsidiaries and distributors.67GAMMA PRANA_08-2013_EN
Most popular related searches
Stay in the loop!
Select your areas of interest to receive industry updates.