Low Voltage Grid Feeding Inverter SP PRO Series

POWER PERFORMANCE PASSIONFeaturesSince 1981 Selectronic has designed and manufactured inverters for the harsh Australian environment. As a result Selectronic has developed one of the most innovative and flexible inverters in the world today. Off Grid, Utility, Grid Tie with back up, Smart Grid, Marine, Leisure and Industrial markets can all be accessed with this one advanced inverter. Featuring advanced thermal power management and super high speed digital signal processing, new standards have been set for reliability, features, surge capability, power density plus the inclusion of outstanding configuration flexibility.The SP PRO series will act as a low voltage grid feeding inverter and will provide back-up power to the load if grid electricity has failed. The unit can also be configured to operate as an Off Grid Interactive Inverter Charger, with fast preset configurations for either mobile or remote power system use. » Low distortion sine wave Interactive Inverter Charger with grid feed ability all in one unit » True 100% charge capacity » Outstanding surge capacity » Superbly quiet » Advanced thermal techniques provide excellent high temperature performance » Five stage battery charging with dual float points and adjustable temperature compensation » Battery mid point monitoring with automatic equalisation » Automatic changeover when grid fails without using a second inverter » Grid Export » Parallel operation with Grid or Generator for increased output » Recharge batteries using cheapest utility tarriff » Automatic AC transfer switch with anti-chatter protection » Simple intuitive LED display. » Redundant safety disconnect for pluggable operation » Plug and play or fully configurable via computer » Eighteen months of daily energy totals » Detailed performance data with adjustable 30/15/10/5/1 minute sample rate » Four months of detailed performance data at 30 minute sample rate » Easy to use configuration/monitoring software supplied free with inverter » “Partial state of charge” control to reduce generator run time whilst maximising PV yeild » Conformal coated PCBs - mil spec silicone » AC Coupling configurable » Nominal Battery Voltage 24V DC, 48 V DC and 120V DC » 3 Phase Compatible » 4 x addressable relay outputs and 3 x digital outputs » 4 x addressable digital inputs and 2 x analogue inputs » 2 x user definable shunt inputs » Low battery shutdown override in case of emergency » Discretionary load control » 2 x serial ports with power for accessories » Variable speed fan with service alert » Lifetime monitored capacitors with service alert » Warranty, 5 years to 8 years (country dependant) » 100% Australian designed and manufacturedSP PRO SERIES SPECIFICATIONSPOWER PERFORMANCE PASSIONSP PRO SERIES SPECIFICATIONS SPMC 240–AU SPMC 241–AU SPMC 481–AU SPMC 482–AU SPMC 1201–AU SPLC 1201-AUNominal battery voltage 24 V 24 V 48 V 48 V 120V 120VContinuous, output power Continuous, charge current@ 25°C3,000 W 125 A4,500 W 188 A5,000 W 104 A7,500 W 156 A7,500 W 63 A18,000 W 125 AContinious grid export power up to rated output20 second load rating 20 second output current@ 40°C7,500 W 28 A10,500 W 40 A12,000 W 47 A18,000 W 70 A 18,000 W 70 A28,000 W 110 A1 minute output power @ 40°C 5,400 W 7,600 W 8,700 W 13,000 W 13,000 W 20,000 W60 minute output power @ 40°C 3,200 W 4,700 W 5,300 W 8,000 W 8,000 W 20,000 WDC input voltage range 20 - 34 V 20 - 34 V 40 - 68 V 40 - 68 V 100 - 170 V 100 - 170 VTRANSFER SWITCH (Synchronous)AC transfer current capacity 63 A 125 AMax AC input source, (generator/grid) 15 kVA 30 kVAMax total output to Load, AC source + inverter 15 kVA 30 kVAAC transfer time no-breakIf grid fails 0 - 0.03 secondsBattery charger type Temperature compensated, 5 stage, power factor corrected with dual stage floatEFFICIENCyDC consumption idle 6 WDC consumption standby (Econo Mode) 12 - 20 W n/aON with no load 31 W 36 W 37 W 40 W 38 W 75 WPeak efficiency – all modes 95% 95% 95.5% 96% 96.5% 96%10% load 90% 90.5% 91% 91% 91.5% 91%20% load 92.5% 93% 94% 94% 94% 94%50% load 94% 94.5% 95% 95.5% 96% 95.5%100% load 90% 91% 92.5% 93% 93.5% 93%AC OUTPUT (standalone)Range 210 to 240 V+/- 0.5%Regulation <1% droop 0-100% rated load (<2% @ 150%, <5% @200%)THD <3% @ 0-200% rated loadFrequency 50 or 60 Hz +/-0.005% standaloneAC SOURCE (input) Nominal voltage 240 V~Tolerance on nominal voltage adjustable 204 to 264 V~ AC current (Recharge, Bypass & Normal modes) 63 A 125 ANominal input frequency 50/60 Hz Tolerance on nominal frequency installer programmable +/- 1% to 10%Generator can be started by battery SoC, DC voltage, battery load, unit temperature, time & remote controlFEATURESBattery temperature sensor IncludedMid point battery voltage sensing IncludedInverter display 22 x LEDs with auto adjusting intensity. Display indicates, charger status, remaining useable battery capacity, alarms, AC status. AC status LEDs powered from AC voltage. Generator control button. Output mode button. Alarm silence button.Digital Inputs 4 off: Max 60 VDC ( Active > +6 V, Inactive < +3 V )Shunt Inputs 2 off: +/-75 mV, adjustable 25 A to 500 A Analogue Inputs 2 general purpose logged 0-60 V n/aRelay Outputs 4 off: 60 V, 500 mADigital outputs 3 off: 60 V, 5 mACommunication ports 2 off RS232 with adjustable baud rate of up to 57600Memory retention of settings & data permanentSP LINK configuration and monitoring software Included, allows configuration of parameters and remote view of LED display and operating parameters.Dimensions (mounted) 345 W x 545 H x 215 D 520 W x 870 H x 300 DWeight 29 kg 34 kg 35 kg 40 kg 40 kg 105 kgCircuit Breakers AC Source, AC Load Batterydouble pole 63 A single pole 125 An/a double pole 250 AStandards AS 62040.1.1-2003, CE pendingAS/NZS 61000-6-3 2007 AS/NZS 61000-6-4 2007Grid Protection AS 4777 2005 AS 4777 2005 pendingProtection IP43 Warranty 5 to 8 years (country dependant)Accessories Grid Tie Kits, Extension Enclosure, AC Coupling, Grid/Generator Backup, Shunts n/aThrough a policy of continual improvement specifications may differ from this brochure. All ratings are at 40°C and nominal battery voltage unless otherwise stated and correct as at April 2011 BR0002 Rev 10+61 3 9727 6600 1800 006 474 www.selectronic.com.au