Wamtechnik Sp. z o.o.
- Home
- Companies & Suppliers
- Wamtechnik Sp. z o.o.
- Downloads
- LS LSH (Li-SOCl2) Series - Brochure
LS LSH (Li-SOCl2) Series - Brochure
Primary lithium batteryLS 142503.6 V Primary lithium-thionyl chloride (Li-SOCl2)High energy density 1/2 AA-size bobbin cellSeptember 2009Benefitsl High voltage response, stable during most of the lifetime of the applicationl Wide operating temperature range (- 60°C/+85°C)l Low self-discharge rate (less than 1 % per year of storage at +20°C)l Easy integration into compact systemsl Superior resistance to atmospheric corrosionKey featuresl Stainless steel container and end caps (low magnetic signature)l Hermetic glass-to-metal sealingl Non-flammable electrolytel Compliant with IEC 60086-4 safety standard and IEC 60079-11 intrinsic safety standard (class T4 assignment)l Underwriters Laboratories (UL) Component Recognitionl Non-restricted for transport/ Non-assigned to Class 9 according to the UN Recommendations on the transport of dangerous goods – Model Regulationsl Manufactured in France, UK, ChinaMain applicationsl Utility meteringl Automatic meter readingl Alarms and security devicesl Tollgate systemsl Memory back-upl Computer real-time clocksl Tracking systemsl Automotive electronicsl Professional electronicsElectrical characteristics(typical values relative to cells stored for one year or less at +30 °C max.)Nominal capacity 1.20 Ah(at 1 mA +20 °C 2.0 V cut-off. The capacity restored by the cell varies according to current drain, temperature and cut-off)Open circuit voltage (at +20°C) 3.67 VNominal voltage (at 0.1 mA +20°C) 3.6 VNominal energy 4.32 WhPulse capability: Typically up to 100 mA (100 mA/0.1 second pulses, drained every 2 mn at +20 °C from undischarged cells with 10 µA base current, yield voltage readings above 3.0 V. The readings may vary according to the pulse characteristics, the temperature, and the cell’s previous history. Fitting the cell with a capacitor may be recommended in severe conditions. Consult Saft)Maximum recommended continuous current 35 mA (Higher currents are possible, consult Saft)Storage (recommended) +30°C (+86°F) max (for more severe conditions, consult Saft)Operating temperature range -60°C/+85°C(Operation above ambient T may lead to reduced capacity and (- 76°F/+185°F) lower voltage readings at the beginning of pulses. Consult Saft)Physical characteristicsDiameter (max) 14.55 mm (0.57 in)Height (max) 25.15 mm (0.99 in)Typical weight 8.9 g (0.3 oz)Li metal content approx. 0.3 gAvailable termination suffix CN, CNR radial tabs 2 PF, 3 PF, 3 PF RP, 4 PF radial pins CNA (AX) axial leads FL flying leads...etc. Cell size references ½ R6 – ½ AASaftSpecialty Battery Group12, rue Sadi Carnot93170 Bagnolet - FranceTel.: +33 (0)1 49 93 19 18Fax: +33 (0)1 49 93 19 69www.saftbatteries.comDoc. No 31072-2-0909Information in this document is subject to change without notice and becomes contractual only after written confirmation by Saft.For more details on primary lithium technologies please refer to Primary Lithium Batteries Selector Guide Doc No 31048-2.Published by the Communications Department.Photo credit: SaftSociété anonyme au capital de 31 944 000 RCS Bobigny B 383 703 873Produced by Arthur Associates Limited.Storagel The storage area should be clean, cool (preferably not exceeding +30°C), dry and ventilated.Warningl Fire, explosion and burn hazard.l Do not recharge, short circuit, crush, disassemble, heat above 100°C (212°F), incinerate, or expose contents to water.l Do not solder directly to the cell (use tabbed cell versions instead).24.65 ± 0.51.35 ± 0.3Ø 14.44 ±0.11Ø 7.5 ± 0.1(flat area)0.4 ± 0.1Ø 4.2 min5.5 max(flat area)Dimensions in mm.LS 142500.10.01 0.1 1 10 1002.52.72.83.13.23.33.43.53.63.72.11.9130012001100100090080070060050040030020010002.32.52.72.93.13.33.51 10 100 1000 100000.01 0.1 1 10 1003.02.62.93.7- 20°C- 40°C+ 20°C400 Ohms/8.5 mA + 70°C- 20°C- 40°C+ 20°C+ 70°C56 Ohms/54 mA3 kOhms/1.2 mA7.5 kOhms/0.5 mACurrent (mA)Cell voltage (V)Cell voltage (V)Capacity (mAh)Time (hours)Current (mA)Restored Capacity versus Current and Temperature (2.0 V cut-off)Typical discharge profiles at + 20°CVoltage plateau versus Current and Temperature (at mid-discharge)
