Model SE Series - A.V.R. Stabilizers Brochure

Technical Data SE series MODEL SE-10 SE-11 SE-12 SE-13 SE-14 SE-15 SE-16 SE-17 SE-18 SE-19 SE-20 SE-21 SE-22 SE-23 Power - kVA 1 2 3 4 5 7.5 10 15 20 25 30 40 50 75 Input Phases Monophase Voltage 220 / 230 / 240 V -30% +20% (100 / 110 / 115 / 120 / 127 V on request) Frequency 50 / 60 Hz Output Wave-form SINE WAVE Harmonic distortion No induced distortion Voltage 220 / 230 / 240 V ± 3% (100 / 110 / 115 / 120 / 127 V on request) Frequency 50 / 60 Hz Efficiency at full load 98% Intervention time 0.15 sec. for any voltage variation 2 ms for any voltage variation Voltage variations from 0 to full load None Attenuation of mains disturbances At 0.1 MHz 50 dB, at 1 MHz 55 dB, at 100 MHz 70 dB Test voltage between line and mass 2250 V Protections Overload, min/max mains voltage, min/max output voltage Signals LED Input; Output; Min/Max Input Voltage Input; Output; Fault Display Optional Standard Voltmeter in input and output Optional Environmental Temperature -22°C ÷ 50°C Non-condensing humidity 0% ÷ 95% Cooling Air type Forced Protection rating IP20 Dimensions W x D x H - mm 310 x 310 x 180 400 x 250 x 540 400 x 250 x 640 500 x 250 x 740 600 x 300 x 850 600 x 400 x 850 600 x 400 x 1050 600 x 400 x 1250 Weight - kg 11 16 18 20 22 37 45 63 90 115 135 180 210 350 CE Marking 2004/108/EC; 2006/95/EC Compliance with the standards IEC 742 Factory - Head Office S.P. km 5,3 C/da San Cusumano - 91100 Trapani – Italy Tel. +39 0923 562794 - Fax +39 0923 567880 Http://www.layer.it - E-mail: layer@layer.it