Myking Electrode Holder & Ground Clamps Brochure

Makes forbetter weldingMakes forbetter weldingMYKING Electrode Holder– with 1 or 2 electrode positions90° or 90°/45°Only 3parts• Affords the most economical use ofthe electrode.• Is comprised of only three parts.• Incorporatesdouble-screwedcable connectorsto ensureminimum electricalresistance andreduce cable strain.• Needs a minimum of maintenance, allowsmaximum utilization of man-hours.• Does not need spring loaded electrode clamps.• Is almost impossible to break in normal use.• Has excellent handgrip and balance properties.• Well insulated.• Conforms to EN 60974-11Electrode- Electrode- Weight Length Material Cableposition diameterMYKING 600 45° and 90° max. 7/32” (6 mm) 19 oz (535 g) 10” (250 mm) brass 1 to 2/0 (50-70 mm2)MYKING 450 45° and 90° max. 3/16” (5 mm) 17 oz (485 g) 10” (250 mm) brass 1 to 2/0 (35-70 mm2)MYKING 200 45° and 90° max. 5/32” (4 mm) 10 oz (285 g) 8” (200 mm) brass 26 to 4 (10-25 mm2)MYKING Remote control Electrode HolderThe brand new, MYKING REMOTE CONTROL ELECTRODE HOLDERS TYPE 200 and 450 greatlyincreases weld quality and operator effectiveness. The MYKING holders allow the operator to controlthe power supply - while still in an operating phase -directly from the holder. It is no longer necessary towalk to the welding machine or to carry a separateremote control unit to the job. Current is simply andeasily controlled by a regulating button attached tothe holder - at the same time as welding tasks arecarried out. This MYKING Electrode Holder is suitable for use withany Thyristor controlled welding machine.Conforms to EN 60974-11The MYKING TIG Torchis designed to be used in combination with theMYKING 200 electrode holder. This gives maximumflexibility and economy.The MYKING TIG torch has exelent balance combinedwith a robust design. The MYKING TIG Torch hastouch-start to initiate the welding arc, and can beused in conjunction with all welding rectifiers.MYKING Ground Clamp G-600• Solid design and construction.• All main parts in brass.• Parallel connectors for maximum grounding effect.• Proper ground contact reduces the possibility offunctional failure while welding. • Double-screwed connectors to ensure minimumresistance and reduce cable strain.• Rubber cable protection against dampness andcorrosion.• No springs are incorporated in the clamp.• Easy to use - even in restricted areas.• Max cable size: 4/0 (120 mm2)MYKING Ground Clamp G-350• The clamp is produced in solid brass.• No screw connections in the contact points whichcan loosen.• Double-screwed connectors to ensure minimum current resistance and reduce cable strain.• Rubber boot protection against dampness and corrosion.• Max. cable size: 1 (50mm2)MYKING Cable connectors• Waterproof connectors to reduce corrosion problems. - IP66.• Double-screwed connectors to ensure minimumresistance and reduce cable strain.• Dual colour cabling, red and black.• Conforms to EN 60974-12MYKING Panel connectors• Waterproof connector. - IP 65• Waterproof protection plug.• Reduced risk of corrosion.• Pliable material, no breakage.• Dual colours available, red and black.Dealer:MYKING Products and parts listPart.no.: Description: Electr.pos.:20.001 MYKING 600 V1=90°20.001.11 Vice body A 1-2 V1=90°20.001.12 Vice stud B 120.001.13 Rubber Handle Handgrip D-60020.021 Cable boot CU-1420.025 Cable screw M 12x1220.002 MYKING 450 V1=90°20.001.11 Vice body A 1-2 V1=90°20.002.12 Vice stud B 220.002.13 Rubber Handle Handgrip D-45020.021 Cable boot CU-1420.026 Cable screw M 10x1020.003 MYKING 200 V1=90°20.003.11 Vice body A 3 V1=90°20.003.12 Vice stud B 320.003.13 Rubber Handle Handgrip D-20020.022 Cable boot CU-920.027 Cable screw M 8x820.050 MYKING TIG Torch20.060 MYKING TIG Torch20.070 MYKING TIG Torch20.080 MYKING TIG Torch20.008 Cable connector 35-70, compl.20.008.1 Plug 35-70, compl.20.008.2 Boot coupling 35-70, compl.20.009 Cable connector 10-25, compl.20.009.1 Plug 10-25, compl.20.009.2 Boot coupling 10-25, compl.Part.no.: Description: Electrode 20.004 MYKING 600 V2=90°/45°20.004.11 Vice body A 1-2 V2=90°/45°20.001.12 Vice stud B 120.001.13 Rubber Handle Handgrip D-60020.021 Cable boot CU-1420.025 Cable screw M 12x1220.005 MYKING 450 V2=90°/45°20.004.11 Vice body A 1-2 V2=90°/45°20.002.12 Vice stud B 220.002.13 Rubber Handle Handgrip D-45020.021 Cable boot CU-1420.026 Cable screw M 10x1020.006 MYKING 200 V2=90°/45°20.006.11 Vice body A 3 V2=90°/45°20.003.12 Vice stud B 320.003.13 Rubber Handle Handgrip D-20020.022 Cable boot CU-920.027 Cable screw M 8x820.007 MYKING 200 V2=90°/45°with remote control20.017 MYKING 450 V2=90°/45°with remote control20.011 Ground clamp G-60020.111 Ground clamp G-35020.013 Panel connector 16-20020.014 Panel connector 22-40020.015 Panel connector 24-500Part Number 20.050MYKING TIG TorchPart Number 20.070Part Number 20.080Part Number 20.060In USAEnviroflex International Inc.1051 Clinton St., Buffalo, NY14206-2823 Phone: (716)883-2319Fax: (716)892-2139Toll free: 1-877-ENV-FLEXEmail: info@enviroflex.comWeb Site: www.enviroflex.com In Canada:Enviroflex International Inc.75 Rosedale Avenue WestUnit 12, Brampton, ON L6X 4H4 Phone: (905)866-5606Fax: (905)866-5602Toll free: 1-877-ENV-FLEXEmail: info@enviroflex.comWeb Site: www.enviroflex.com positions: