Oil & Gas Drillng Hoses Brochure

OIL&GASDRILLINGHOSEPRODUCTSContact Powertrack International800-365-1577www.powertrackhose.com sales@powertrackhose.com-Rotary Hose-Kelly Hose-Hydraulic Hose-BOP Hose-Mud Pump Hose-Frac Hose-Oil Suction Hose-Discharge HoseWarranty:Powertrack International Inc. warrants its products to be free from defects in materials and workmanship when properlyinstalled and maintained. Products covered include those items contained in this catalog.If during the warranty period, a product is discovered to be defective, Powertrack will, at its option, replace the warrantedproduct or grant the purchaser a credit for the product claimed to be defective. Powertrack will have the sole discretionto determine whether the product was defective.This warranty is null and void if the product has been used in the wrong application or has been damaged from an accident or willfully destroyed.NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, NOR ANY OTHERWARRANTY, EXPRESS OR IMPLIED, IS MADE BY POWERTRACK INTERNATIONAL INC. THE FOREGOINGSTATES POWERTRACK INTERNATIONAL INC.’S ENTIRE AND EXCLUSIVE LIABILITY AND BUYER’S EXCLUSIVEREMEDY FOR ANY CLAIM OR DAMAGES IN CONNECTION WITH THE SALE OF THE PRODUCTS HEREUNDER.IN NO EVENT SHALL POWERTRACK INTERNATIONAL INC. BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER.SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIALDAMAGES, SO THE ABOVE LIMITATION MAY NOT BE APPLIED TO YOU.Claim Information:To make a claim under this warranty:1) Please contact your closest Powertrack International Inc. representative with the invoice number and product information.2) Your Powertrack International sales representative will then issue you a returned goods authorization number and further instructions as to where to return the product in question for testing and evaluation (product cannot be accepted for processing without a return goods authorization number).3) Following completion of testing and evaluation, Powertrack International Inc. will contact you with the results.WARNINGIMPORTANT SAFETY INFORMATIONHose InstallationCorrect and proper installation of all Powertrack International, Inc. hose products and components is vital to the operation and use of the products. Improper installation can result in serious bodily harm and/or property damagecaused by flying projectiles or spraying fluids. To avoid bodily injury and property damage, it is necessary to carefullyread the information in this catalog regarding hose installation. Some important factors are:-changes in length -elbows and adapters to relieve strain-protection from high temperature -rubbing or abrasion-twisting -improper hose movement-proper bend radius -using incorrect combinations of hoses and fittingsThese factors and the other information in this catalog regarding hose installation should be carefully reviewed BEFOREinstalling the hose.Hose MaintenanceProper maintenance of the hose is essential to the safety of the hose and its components. Hoses should be stored in adry place. They should be inspected visually before use. Any hose that has a cut or gouge in the cover thatexposes the reinforcement should be retired from use. Hoses should also be inspected for kinking or for broken reinforcements. If a kink is found or the reinforcement is broken, the hose is no longer safe for use as the pressure caused by the kink may cause it to burst. Inadequate attention to hose maintenance can result in hose leakage, bursting, or other failure that can cause serious bodily harm or property damage. Further information on properhose maintenance is described in the SAE Recommended Practices located on the following page.SELECTION, INSTALLATION, AND MAINTENANCE OF HOSE AND HOSE ASSEMBLIESSAE J1273 NOV91 SAE Recommended PracticeReport of the Fluid Conductors and Connectors Technical Committee, approved September 1979 and reaffirmed May, 1986. Completely revised by the SAE FluidConductors and Connectors Technical Committee SC2-Hydraulic Hose and Hose Fittings November, 1991. Rationale statement available.1. ScopeHose (also includes hose assemblies) has a finite life, and there are a number of factorswhich will reduce its life.This SAE Recommended Practice is intended as a guide to assist system designersand/or users in the selection, installation, and maintenance of hose. The designers andusers must make a systematic review of each application and then select, install, and maintain the hose to fulfill the requirements of the application. The following are generalguidelines and are not necessarily a complete list.Warning: IMPROPER SELECTION, INSTALLATION, OR MAINTENANCE MAYRESULT IN PREMATURE FAILURES, BODILY INJURY, OR PROPERTY DAMAGE.2. Reference2.1 Applicable DocumentsThe following publications form a part of this specification to the extent specified here-in.The latest issue of SAE publications shall apply.2.1.1 SAE Publications- Available from SAE, 400 Commonwealth Drive, Warrendale,PA 15096-0001.J516 Hydraulic Hose FittingsJ517- Hydraulic Hose3. SelectionThe following is a list of factors which must be considered before final hose selectioncan be made.3.1 PressureAfter determining the system pressure, hose selection must be made so that the rec-ommended maximum operating pressure is equal to or greater than the system pressure.Surge pressures higher than the maximum operating pressure will shorten hose life andmust be taken into account by the hydraulic designer.3.2 SuctionHoses used for suction applications must be selected to insure the hose will withstandthe negative pressures of the system.3.3 TemperatureCare must be taken to insure that fluid and ambient temperatures, both static and tran-sient, do not exceed the limitations of the hose. Special care must be taken when routingnear hot manifolds.3.4 Fluid CompatibilityHose selection must assure compatibility of the hose tube, cover, and fittings with thefluid used. Additional caution must be observed in hose selection for gaseous applications.3.5 SizeTransmission of power by means of pressurized fluid varies with pressure and rate offlow. The size of the components must be adequate to keep pressure losses to a minimumand avoid damage to the hose due to heat generation or excessive turbulence.3.6 RoutingAttention must be given to optimum routing to minimize inherent problems.3.7 EnvironmentCare must be taken to insure that the hose and fittings are either compatible with or pro-tected from the environment to which they are exposed. Environmental conditions such asultraviolet light, ozone, salt water, chemicals, and air pollutants can cause degradation andpremature failure, and, therefore, must be considered.3.8 Mechanical LoadsExternal forces can significantly reduce hose life. Mechanical loads which must be con-sidered include excessive flexing, twist, kinking, tensile or side loads, bend radius, andvibration. Use of swivel-type fittings or adapters may be required to insure no twist is putinto the hose. Unusual applications may require special testing prior to hose selection.3.9 AbrasionWhile a hose is designed with a reasonable level of abrasion-resistance, care must betaken to protect the hose from excessive abrasion which can result in erosion, snagging,and cutting of the hose cover. Exposure of the reinforcement will significantly acceleratehose failure.3.10 Proper End FittingCare must be taken to insure that proper compatibility exists between the hose andcoupling selected based on the manufacturer’s recommendations substantiated by testing toindustry standards such as SAE J517. End fitting components from one manufacturer areusually not compatible with end fitting components supplied by another manufacturer (i.e.,using a hose fitting nipple from one manufacturer with a hose socket from another manufac-turer). It is the responsibility of the fabricator to consult the manufacturer’s written instruc-tions or the manufacturer directly for proper end fitting componentry.3.11 LengthWhen establishing proper hose length, motion absorption, hose length changes due topressure, as well as hose and machine tolerances must be considered. 3.12 Specifications and StandardsWhen selecting hose, government, industry and manufacturers’ specifications and rec-ommendations must be reviewed as applicable.3.13 Hose CleanlinessHose components vary in cleanliness levels. Care must be taken to insure that theassemblies selected have an adequate level of cleanliness for the application.3.14 Electrical ConductivityCertain applications require that hose be non-conductive to prevent electrical currentflow. Other applications require the hose to be sufficiently conductive to drain off staticelectricity. Hose and fittings must be chosen with these needs in mind.4. InstallationAfter selection of proper hose, the following factors must be considered bythe installer.4.1 Pre-Installation InspectionPrior to installation, a careful examination of the hose must be performed. Allcomponents must be checked for correct style, size, and length. In addition,the hose must be examined for cleanliness, I.D. obstructions, blisters, loosecover, or any other visible defects.4.2 Follow Manufacturers’ Assembly InstructionsHose assemblies may be fabricated by the manufacturer, an agent for or cus-tomer of the manufacturer, or by the user. Fabrication of permanently attachedfittings to hydraulic hose requires specialized assembly equipment. Fieldattachable fittings (screw style and segment clamp style) can usually beassembled without specialized equipment, although many manufacturers pro-vide equipment to assist in this operation.SAE J517 hose from one manufacturer is usually not compatible with SAEJ516 fittings supplied by another manufacturer. It is the responsibility of thefabricator to consult the manufacturer’s written assembly instructions or themanufacturer’s directly before intermixing hose and fittings from two manufac-turers. Similarly, assembly equipment from one manufacturer is usually notinterchangeable with that of another manufacturer. It is the responsibility of thefabricator to consult the manufacturer’s written instructions or the manufacturerdirectly for proper assembly equipment. Always follow the manufacturer’sinstructions for proper preparation and fabrication of hose assemblies.4.3 Minimum Bend RadiusInstallation at less than minimum bend radius may significantly reduce hoselife. Particular attention must be given to preclude sharp bending at thehose/fitting juncture.4.4 Twist Angle and OrientationHose installations must be such that relative motion of machine componentsproduces bending of the hose rather than twisting.4.5 SecurementIn many applications, it may be necessary to restrain, protect, or guide thehose to protect it from damage by unnecessary flexing, pressure surges, andcontact with other mechanical components. Care must be taken to insure suchrestraints do not introduce additional stress or wear joints.4.6 Proper Connection of PortsProper physical installation of the hose requires a correctly installed port con-nection while insuring that no twist or torque is put into the hose.4.7 Avoid External DamageProper installation is not complete without insuring that tensile loads, sideloads, kinking, flattening, potential abrasion, thread damage, or damage tosealing surfaces are corrected or eliminated.4.8 System Check-OutAfter completing the installation, all air entrapment must be eliminated and thesystem pressurized to the maximum system pressure and checked for properfunction and freedom from leaks.NOTE: Avoid potential hazardous areas while testing.5. MaintenanceEven with proper selection and installation, hose life may be significantlyreduced without a continuing maintenance program. Frequency should bedetermined by the severity of the application and risk potential. A maintenanceprogram should include the following as a minimum.5.1 Hose StorageHose products in storage can be affected adversely by temperature, humidity,ozone, sunlight, oils, solvents, corrosive liquids and fumes, insects, rodents,and radioactive materials. Storage areas should be relatively cool and darkand free of dust, dirt, dampness, and mildew.5.2 Visual InspectionAny of the following conditions requires replacement of the hose:a. Leaks at fitting or in hose (leaking fluid is a fire hazard)b. Damaged, cut, or abraded cover (any reinforcement exposed)c. Kinked, crushed, flattened, or twisted hosed. Hard, stiff, heat cracked, or charred hosee. Blistered, soft degraded, or loose coverf. Cracked, damaged, or badly corroded fittingsg. Fitting slippage on hose5.3 Visual InspectionThe following items must be tightened, repaired, or replaced as required:a. Leaking port conditionsb. Clamps, guards, shieldsc. Remove excessive dirt buildupd. System fluid level, fluid type, and any air entrapment5.4 Functional TestOperate the system at maximum operating pressure and check for possiblemalfunctions and freedom from leaks.NOTE: Avoid potential hazardous areas while testing5.5 Replacement IntervalsSpecific replacement intervals must be considered based on previous servicelife, government or industry recommendations, or when failures could result inunacceptable down time, damage, or injury risk.Reprinted with permission from SAE 1273 ©1991 Society of Automotive Engineers, Inc.Table of ContentsArmored BOP Control Line Hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Red BOP Firesafe Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Grade C Rotary Drilling Hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Grade D Rotary and Vibrator Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Slim Hole Rotary Drilling Hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mud Pump Suction Hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Kelly Hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hammer Unions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R15- Six Spiral Hydraulic Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R13- Six Spiral Hydraulic Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4SH- Four Spiral Hydraulic Hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SAE 100R12 High Pressure Hydraulic Hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SAE 100R5 Hydraulic Hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2SN- Two Wire Hydraulic Hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1SN- One Wire Hydraulic Hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Custom Hydraulic Hose Assemblies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Oilfield Vacuum Hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Corrugated Suction and Discharge Hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Petroleum Suction Hose150psi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .250psi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Black Rubber Suction Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .UHMWPE Chemical Hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hot Air Blower Hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tan Flextra Hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Jetting Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Frac Tank Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Frac Tank Hose Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yellow Wire Braid Air Hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Steam Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Hose GripsDual LIft Eye Grip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Cord Cap Grip. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cam and Grove Cam and Groove Type A, Type B, Type C, Type D, and Type E. . . . . . . . . . . . . . . . . . . . . . . . . .Cam and Groove Type F, Type DC, Type DP, and Gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Steel Hose Mender. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Round Hole Strainer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reducing Cam and Groove CouplingsReducing Cam and Groove Type A, Type B, and Type C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reducing Cam and Groove Type D, Type E, and Type F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Coupler x Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard Frac Tank Blinds and UnionsThreaded Blind & 3 Piece Coupling, Female Threaded & Weld-On, and Standard Hose Fittings. . Male Threaded, Weld-on & O-Ring Threaded Tank, O-Ring, and Hammer Nut Fittings. . . . . . . . .Shank Hose Couplings Combination Hose Nipple . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112233456667788910101010111111121213131414141415161616171717181818www.powertrackhose.com 800-365-1577 sales@powertrackhose.com®Armored BOP Control Line Hosewww.powertrackhose.com 800-365-1577 sales@powertrackhose.com 1Powertrack International’s Armored BOP Control Line Hose is designed to handle the rigors of oilfield operations.The armor is constructed of heavy-duty .018” stainless steel. A carbon steel nipple that includes a large hex with longerthreads allows for easy hammer union installation. The safety factor is 4:1.Construction:Armor: .018 heavy-duty stainless steel.Thermal Blanket: 1500ºF continuous rating,non-flammable, and non-conductive.Armor Ferrule: 316 stainless steel.(Carbon steel also available.)End Connection: 303 stainless steel with extra long hex. (Carbon steel also available.)PartNumberHoseI.D.(in.)HoseO.D.(in.)WorkingPressure(psi)TestPressure(psi)Weightlbs. /ft.PT-BOP-16 1” 2.06” 5,000 20,000 2.8PT-BOP-32 2” 3.50” 5,000 20,000 8.3Red BOP Firesafe HoseConstruction:Tube: Black, oil-resistant nitrile (NBR).Reinforcement: Multiple plies of high tensilesteel wire.Cover: Red, specially compounded, fiberglassimpregnated, flame-resistant rubber.The flame-resistant Red BOP Firesafe Hose is designed to control BOP’s (Blow Out Preventers) and associatedvalves that control well pressure during drilling operations.PartNumberHoseI.D.(in.)HoseO.D.(in.)WorkingPressure(psi)Min. BendRadius(in.)Weightlbs. /ft.PT-RDBOP-2SN-06 3/8” 0.91” 3,000 6 0.4PT-RDBOP-2SN-08 1/2” 1.02” 3,000 8 0.6PT-RDBOP-2SN-12 3/4” 1.32” 3,000 10 1.2PT-RDBOP-2SN-16 1” 1.61” 3,000 12 1.6Reinforcement: Multiple plies of bias laid nylon cord for extrastrength and flexibility. Two spiral wound, high tensile, multiple strandcables mechanically secured to built-in nipples provide unsurpassedruggedness and reliability under severe service conditions.Cover: Black, oil, weather, and abrasion-resistant neoprene (CR).Tube: Black, oil and abrasion-resistant neoprene (CR). Suitable foroil or water based muds.End Fittings: Full-flow swaged on API couplings are integrallysecured to the hose reinforcement. Most hose assemblies are supplied with male API threaded ends but we also offer them withflanges, unions, swivels, and other types of couplings upon request.Operating Temperatures: -40ºF to 200ºF.Construction:Available with S.S. armor and fire protection.PartNumberHoseI.D.(in.)HoseO.D.(in.)WorkingPressure(psi)TestPressure(psi)BendRadius(in.)Weightlbs. / ft.Hose Coup.PT-RotaryD-40 2-1/2” 4.4” 5,000 10,000 2.3 10.0 29.0PT-RotaryD-48 3” 4.9” 5,000 10,000 2.6 12.1 38.0PT-RotaryD-56 3-1/2” 5.5” 5,000 10,000 2.9 13.4 44.0PT-RotaryD-64 4” 6.5” 5,000 10,000 3.9 22.0 68.0Powertrack International’s Grade D Rotary & Vibrator Hose is designed for use in high pressure rotary serviceapplications in drilling and exploration work at API Grade D working pressures. Our Vibrator Hose is designed as a highpressure vibration dampener between the mud pump and the stand pipe.Grade D Rotary & Vibrator HoseGrade C Rotary Drilling HosePowertrack International’s Grade C Rotary Vibrator, Drilling, and De-coker Hose is designed as the flexible connection between the standpipe and swivel for pumping mud at a very high pressure in oil drilling and exploration.The Grade C Rotary Drilling Hose is also suitable for refinery de-coker service. This hose features high strength spiralsteel wire reinforcement which provides a very flexible connection capable of withstanding high pumping pressures atAPI Grade C working pressures. The neoprene (CR) cover and tube provide excellent resistance to heat, oil, mud,weather, and abrasion.PartNumberHoseI.D.(in.)HoseO.D.(in.)PliesofRein.WorkingPressure(psi)TestPressure(psi)BendRadius(in.)Weightlbs. / ft.PT-RotaryC-40 2-1/2” 3.88” 6 4,000 8,000 48.0 9.0PT-RotaryC-48 3” 5.00” 8 4,000 8,000 48.0 13.1PT-RotaryC-56 3-1/2” 5.56” 8 4,000 8,000 54.5 17.4Construction:Reinforcement: Multiple layers of spiralled high tensile carbon steel wire.Cover: Black, neoprene (CR), Grade C. Heat, oil, abrasion, and weather-resistant.Tube: Black, oil and abrasion-resistant neoprene (CR).Couplings: Special swaged-on type. 3” male API line pipe thread on 2-1/2” size. 4” male API line pipe thread on 3” and 3-1/2” sizes.Operating Temperatures: -40ºF to 200ºF.2 www.powertrackhose.com 800-365-1577 sales@powertrackhose.com Slim Hole Rotary Drilling HosePowertrack International’s Slim Hole Rotary Drilling Hose is specifically designed for rotary drilling on portabledrilling rigs, workover rigs, slim hole, and seismograph rigs. This strong and flexible hose is reinforced with multiple layers of high tensile steel wire. The neoprene (CR) cover and tube are heat, oil, abrasion, and weather-resistant. PartNumberHoseI.D.(in.)HoseO.D.(in.)Pliesof Rein.WorkingPressure(psi)BendRadius(in.)Weightlbs. / ft.PT-RotarySH-32 2” 3.06” 3 2,500 18 3.9PT-RotarySH-40 2-1/2” 3.65” 4 2,500 24 5.3PT-RotarySH-48 3” 4.13” 4 2,000 30 5.8Construction:Reinforcement: Three or four braids of high tensileheavy gauge steel wire. A textile overbraid providesimproved cover adhesion.Cover: Neoprene (CR) black cover.Heat, oil, abrasion, and weather-resistant.Tube: Black neoprene (CR) provides oil and abrasionresistance suitable for oil and water based muds.Couplings: Swaged-on high pressure carbon steel male NPT or API threaded ends or reusable couplings.Operating Temperatures: -40ºF to 200ºF.Mud Pump Suction HosePowertrack International’s Mud Pump Suction Hose is an ideal flexible connection between the slush pump andmud pit. The helical design provides excellent vacuum capabilities. The cover is oil, abrasion, and ozone-resistant.PartNumberHoseI.D.(in.)HoseO.D.(in.)WorkingPressure(psi)Pliesof Rein.BendRadius(in.)Weightlbs. / ft.PT610-Mudpump-64 4” 5.00” 200 4 24 4.7PT610-Mudpump-96 6” 7.13” 200 4 36 8.5PT610-Mudpump-128 8” 9.25” 150 4 48 12.8PT610-Mudpump-160 10” 11.38” 75 4 60 19.5PT610-Mudpump-192 12” 13.38” 75 4 72 24.8Construction:Reinforcement: High tensile synthetic plies with awire helix.Cover: Oil-resistant, synthetic rubber.Tube: Black, SBR.Couplings: Contact Powertrack International for available fittings.Operating Temperatures: -40ºF to 180ºF.www.powertrackhose.com 800-365-1577 sales@powertrackhose.com 3PartNumberHoseI.D.(in.)HoseO.D.(in.)WorkingPressure(psi)BurstPressure(psi)Min.BendRadius(in.)Weightlbs. / ft.PliesofRein.2” 5000psi Kelly 2” 2.68” 5,000 14,500 27.5 3.0 4R13-32 2” 2.83” 5,070 21,750 24.8 4.6 6Powertrack International’s Kelly Hose is constructed with a special abrasion and U.V.-resistant cover, making it a preferred oilfield hose. The Kelly Hose is designed to meet orexceed the API requirement of a 2.5 to 1 safety factor. It iscoupled with our special Male API, long thread fittings or ournew 2” Figure 602 Union fittings.Kelly HoseNO HASSLE 2” Figure 602 Union Fitting Large HEX Male API FittingEliminates 2 leak points Eliminates pipe dope and weldingAlso available in Fig. 1502 version for 6 wire hose.Kelly Hose Specifications:4 www.powertrackhose.com 800-365-1577 sales@powertrackhose.com Hammer UnionsFigure NumberPressure Rating (PSI) Nominal Pipe SizeStandard Service Sour Gas Service1” 1-1/4” 1-1/2” 2” 2-1/2” 3” 4” 5” 6” 8” 10” 12”Cold Working TestCold Working Test100 1,000 1,500 - - x x x x x x x200 2,000 3,000 - - x x x x x x x x x x206 2,000 3,000 - - x x x x x x x x x x207 2,000 3,000 - - x x300 2,000 3,000 - - x400 2,500 3,750 2,500 3,750 x x x x x400 4,000 6,000 4,000 6,000 x x x600 6,000 9,000 - - x x x602 6,000 9,000 6,000 9,000 x x x x x x x1002 10,000 15,000 7,500 11,250 x x x x x x1002 10,000 15,000 7,500 11,250 x1003 10,000 15,000 7,500 11,250 x x x1502 15,000 22,500 10,000 15,000 x x x x x x x2202 - - 15,000 22,500 x xFigure 100 Figure 206 Figure 300Figure 600Figure 200 Figure 207 Figure 400~Cold workingpressure- 1,000psi.~Low pressure union.Manifold and general service.~Cold workingpressure- 2,000psi.~General purposeunion.~Threaded and buttweld ends.~Cold workingpressure- 2,000psi.~O-ring in metal subimproves sealing andextends service life.~Cup & cone providezero clearance against extrusion.~Threaded and buttweld ends. ~Cold workingpressure- 2,000psi.~Manifold and blankingthe end of the line-O-ring cap providesleak-free seal- threadedand weld end.~Connection cap can be tapped for pressure gauge or valve.~Cold workingpressure- 2,000psi.~Flat face design forstraight breakout ofconnected components such as valves orfittings for repair or inspection.~Moderate vacuumservice insulating unionsavailable upon request.~Cold workingpressure- 4,000psi for 2” through 4”sizes. 5” through12” sizes- cold working pressure is 2,500psi.~Primarily used formanifold pumping and mud. Figure 602 Figure 1002 Figure 1003 Figure 1502 Figure 2202~Cold workingpressure- 6,000psi.~Used for steam service, well servicing, and boiler connection.~Primary seal is bronze to prevent corrosion and absorb expansionand contraction.~Cold workingpressure- 6,000psi.~Lip-type elastomer seal protects metal-to-metalseal and seal design reduces turbulence in the line.~Used primarily in manifoldand mud service.~Available with non-pressure thread sealing ends.~Cold working pressure- 10,000psi for 1” through 4” sizes. 5” and 6” sizes- cold working pressure is 7,500psi.~Field replaceable lip type elastomer seal protects secondary metal-to-metal seal. ~Cold workingpressure- 10,000psi for2” through 3” sizes. 4”and 5” sizes- cold working pressure is 7,500psi.~These misaligning unions are used in highpressure applicationswhere the lines are notaligned.~7” line misalignmentaccepted. ~Cold workingpressure- 15,000psi.~Used primarily in choke/kill lines, cementing, fracturing, and testing.~Available in threaded,welded, butt weld, andnon-pressure thread sealing ends.~Cold workingpressure- 15,000psi.~Used in sour gasservices.~Meets Nace MR-01-75standards.~Butt weld only.~Painted green for easyidentification.www.powertrackhose.com 800-365-1577 sales@powertrackhose.com 5R13 - Six Spiral Hydraulic HosePowertrack International’s R13 - Six Spiral Hydraulic Hose is designed for high pressure hydraulic oil lines. The Six Spiral Hydraulic Hose is reinforced with four to sixplies of spiral wound high tensile wire separated by layers of rubber insulation. The cover is abrasion and oil-resistant.Construction:Reinforcement: Four or six plies of spiralwound high tensile wire separated by layers of rubber insulation.Cover: Oil and abrasion-resistant syntheticrubber.Tube: Oil-resistant synthetic rubber.Operating Temperatures: -40ºF to 250ºFconstant / 257ºF intermittent.PartNumberHoseI.D.(in.)HoseO.D.(in.)WorkingPressure(psi)BurstPressure(psi)Min. BendRadius(in.)Approx.Weightlbs. / ft.R13-12* 3/4” 1.26” 5,070 28,270 9.5 1.1R13-16* 1” 1.54” 5,070 23,920 11.8 1.5R13-20 1-1/4” 1.93” 5,070 21,750 16.5 2.2R13-24 1-1/2” 2.28” 5,070 23,200 19.7 3.2R13-32 2” 2.83” 5,070 21,750 24.8 4.6*Four spiral wireR15 - Six Spiral Hydraulic HosePowertrack International’s R15 - Six Spiral Hydraulic Hose is ideal for high pressurehydraulic oil lines. The Six Spiral Hydraulic Hose is reinforced with four to six plies of spiralwound high tensile wire separated by layers of rubber insulation. The cover is abrasion and oil-resistant.Construction:Reinforcement: Four or six plies of spiral woundhigh tensile wire separated by layers of rubber insulation.Cover: Oil and abrasion-resistant synthetic blackrubber.Tube: Oil-resistant synthetic rubber.Operating Temperatures: -40ºF to 250ºF constant / 257ºF intermittent.PartNumberHoseI.D.(in.)HoseO.D.(in.)WorkingPressure(psi)BurstPressure(psi)Min. BendRadius(in.)Approx.Weightlbs. / ft.R15-12* 3/4” 1.26” 6,090 25,370 10.4 1.0R15-16* 1” 1.50” 6,090 25,370 10.5 1.4R15-20 1-1/4” 1.95” 6,090 24,360 10.5 2.5R15-24 1-1/2” 2.28” 6,090 24,360 12.4 3.2*Four spiral wirePartNumberHoseI.D.(in.)HoseO.D.(in.)WorkingPressure(psi)BurstPressure(psi)Min. BendRadius(in.)Approx.Weightlbs. / ft.4SH-12 3/4” 1.26” 6,090 25,370 8.3 1.04SH-16 1” 1.50” 5,580 25,370 8.7 1.44SH-20 1-1/4” 1.78” 5,070 20,300 16.5 1.64SH-24 1-1/2” 2.11” 4,350 18,120 22.1 2.24SH-32 2” 2.68” 3,620 14,500 27.6 3.0Reinforcement: Four plies of spiral wound high tensile wire separated by layers of rubber insulation.Cover: Oil and abrasion-resistant synthetic blackrubber. Tube: Oil-resistant synthetic rubber.Operating Temperatures: -40ºF to 250ºF constant / 257ºF intermittent.Construction:Powertrack International’s 4SH - Four Spiral Hydraulic Hose is designed forhigh pressure hydraulic oil lines. The Four Spiral Hydraulic Hose is reinforced withfour plies of spiral wound high tensile wire separated by layers of rubber insulation.The cover is abrasion and oil-resistant.4SH - Four Spiral Hydraulic Hose6 www.powertrackhose.com 800-365-1577 sales@powertrackhose.com SAE 100R5 Hydraulic HosePowertrack International’s SAE 100R5 Hydraulic Hose is a medium pressure one wire braid reinforced hose thatmeets or exceeds requirements of SAE 100R5.HoseI.D.(in.)HoseO.D.(in.)WorkingPressure(psi)BurstPressure(psi)Min. BendRadius(in.)Approx.Weightlbs. / ft.3/16” 0.52” 3,000 12,000 3.0 0.21/4” 0.58” 3,000 12,000 3.4 0.25/16” 0.67” 2,250 9,000 4.0 0.213/32” 0.77” 2,000 8,000 4.6 0.31/2” 0.92” 1,750 7,000 5.5 0.45/8” 1.08” 1,500 6,000 6.5 0.57/8” 1.23” 800 3,200 7.4 0.51-1/8” 1.50” 625 2,500 9.0 0.61-3/8” 1.75” 500 2,000 10.5 0.71-13/16” 2.22” 350 1,400 13.3 0.92-3/8” 2.87” 350 1,400 24.0 1.4Construction:Reinforcement: One high tensile steel braidover one textile braid.Cover: One textile braid covered with oil-resistantneoprene (CR). MSHA accepted.Tube: Black, oil-resistant nitrile (NBR).Operating Temperatures: -40ºF to 200ºF. SAE 100R12 High Pressure Hydraulic HosePowertrack International’s SAE 100R12 Hydraulic Hose is a high pressure multi-spiral wire reinforced hosedesigned to withstand heavy-duty industrial conditions, applications with severe abrasion conditions, marine applications,and underground open pit mining. This hose is compatible with mineral oils, vegetable oils, and synthetic ester basedoils (up to 212ºF), glycols and polyglycols, mineral oils in aqueous emulsion, and water.PartNumberHoseI.D.(in.)HoseO.D.(in.)WorkingPressure(psi)BurstPressure(psi)Min. BendRadius(in.)Approx.Weightlbs. / ft.R12-06 3/8” 0.79” 4,060 23,200 3.9 0.4R12-08 1/2” 0.93” 4,060 19,570 4.9 0.5R12-10 5/8” 1.07” 4,060 18,850 5.5 0.7R12-12 3/4” 1.20” 4,060 18,850 5.9 0.8R12-16 1” 1.48” 4,060 16,670 8.9 1.1R12-20 1-1/4” 1.81” 3,040 14,500 9.8 1.5R12-24 1-1/2” 2.11” 2,530 14,500 19.7 2.1R12-32 2” 2.63” 2,530 11,600 24.8 3.0Construction:Reinforcement: Four high tensile steel spirals.Cover: Static-resistant synthetic rubber with highozone, weather, and heat resistance. MSHA andFRAS approved.Tube: Oil-resistant synthetic rubber.Operating Temperatures: -40ºF to 250ºFconstant / 257ºF intermittent.www.powertrackhose.com 800-365-1577 sales@powertrackhose.com 71SN - One Wire Hydraulic HosePowertrack International’s 1SN- One Wire Hydraulic Hose is a medium pressure hydraulic line used in the oilfieldand farming industries and meets or exceeds EN853-1SN. This hose is constructed with one high tensile steel wire braid reinforcement and an abrasion and oil-resistant cover.Reinforcement: One high tensile steel wire braid.Cover: Oil and abrasion-resistant synthetic black rubber. Tube: Oil-resistant synthetic rubber.Operating Temperatures: -40ºF to 212ºF constant / 257ºF intermittent.PartNumberHoseI.D.(in.)HoseO.D.(in.)WorkingPressure(psi)BurstPressure(psi)Min. BendRadius(in.)Approx.Weightlbs. / ft.1SN-04 1/4” 0.51” 3,260 14,500 3.9 0.21SN-05 5/16” 0.57” 3,110 13,770 4.5 0.21SN-06 3/8” 0.67” 2,610 11,600 5.0 0.21SN-08 1/2” 0.79” 2,320 9,860 7.0 0.31SN-10 5/8” 0.92” 1,880 8,700 7.9 0.31SN-12 3/4” 1.07” 1,520 7,250 9.5 0.41SN-16 1” 1.38” 1,300 5,220 11.8 0.61SN-20 1-1/4” 1.70” 940 3,770 16.5 0.81SN-24 1-1/2” 1.96” 720 3,770 19.7 1.11SN-32 2” 2.48” 580 3,620 24.8 1.5Construction:2SN - Two Wire Hydraulic HosePowertrack International’s 2SN- Two Wire Hydraulic Hose is a medium pressure hydraulic hose used in the oilfield, farming, and off-road construction industries and meets or exceeds EN853-2SN. This hose is constructed withtwo high tensile steel wire braids and is abrasion and oil-resistant.Construction:Reinforcement: Two high tensile steel wire braids.Cover: Oil and abrasion-resistant syntheticblack rubber. Tube: Oil-resistant synthetic rubber.Operating Temperatures: -40ºF to 212ºF constant / 257ºF intermittent.PartNumberHoseI.D.(in.)HoseO.D.(in.)WorkingPressure(psi)BurstPressure(psi)Min. BendRadius(in.)Approx.Weightlbs. / ft.2SN-04 1/4” 0.58” 5,800 25,370 2.0 0.22SN-05 5/16” 0.64” 5,070 21,460 2.4 0.32SN-06 3/8” 0.74” 5.070 20,300 2.8 0.32SN-08 1/2” 0.86” 5,070 20,300 3.5 0.42SN-10 5/8” 0.98” 3,620 14,790 3.9 0.52SN-12 3/4” 1.14” 3,110 13,050 5.1 0.62SN-16 1” 1.45” 2,530 9,710 6.3 0.92SN-20 1-1/4” 1.85” 2,030 8,120 16.5 1.32SN-24 1-1/2” 2.10” 1,450 7,250 19.7 1.52SN-32 2” 2.61” 1,300 6,090 24.8 2.18 www.powertrackhose.com 800-365-1577 sales@powertrackhose.com Customize Your Hydraulic Hose AssemblyCustomize Your Hydraulic Hose Assembly1. Choose hose I.D. 2. Choose working pressure 3. Pick fitting “A” for left side of hose4. Pick fitting “B” for right side of hose 5. Choose the overall length 6. Call PowertrackPartNumberWorking Pressure (psi) of Hydraulic HosesHose I.D. 1/4” 5/16” 3/8” 1/2” 5/8” 3/4” 1” 1-1/4” 1-1/2” 2”R1T 2,750 2,500 2,250 2,000 1,500 1,250 1,000 625 500 375R2T 5,000 4,250 4,000 3,500 2,750 2,250 2,000 1,625 1,250 1,1251SN 3,265 3,120 2,610 2,320 1,890 1,525 1,275 915 725 5802SN 5,800 5,100 4,800 4,000 3,600 3,100 2,400 1,800 1,300 1,160R16 5,000 4,000 3,500 2,750 2,250 2,000R17 3,045 3,045 3,045 3,045 3,045 3,045R12 4,000 4,000 4,000 3,000 2,500 2,500R9R 7,000 6,450 6,015 5,100 5,100 4,400 4,000 3,700 3,0004SH 6,090 5,510 5,075 4,205 3,625R13 5,000 5,000 5,000 5,000 5,000R15 6,000 6,000 6,000 6,000Available Fittings From Which To Customize Your Hose:MP - Male NPT Solid MIX - Male Inverted SwivelMPX - Male NPT Swivel MIX45 - Male Inverted Swivel 45° ElbowFP - Female NPT Solid MIX90 - Male Inverted Swivel 90° ElbowFPX - Female NPSM Swivel FBXF- Female British Swivel- Flat FaceFJX - Female JIC Swivel FBX - Female British SwivelFJX45 - Female JIC Swivel 45° Elbow FBX45 - Female British Swivel 45° ElbowFJX90 - Female JIC Swivel 90° Elbow FBX90 - Female British Swivel 90° ElbowFJX90L - Female JIC Swivel 90° Elbow- Long Drop FBX90c - Female British Swivel 90° Elbow- Compact TypeMJ - Male JIC Solid- 37° Flare MBP - Male British ParallelMS - Male SAE Solid- 45° Flare MBT - Male British TaperFSX - Female SAE 45° Flare Swivel DKOL - Female Metric Swivel- Light SeriesFSX90 - Female SAE 45° Flare Swivel- 90° Elbow DKOL45 - Female Metric Swivel 45° Elbow- Light SeriesFG - Female Grease Thread Solid- 1/2”-27 DKOL90 - Female Metric Swivel 90° Elbow- Light SeriesMORF - Male O Ring Face Seal DKOS - Female Metric Swivel- Heavy SeriesORFS - Female O Ring Face Seal DKOS45 - Female Metric Swivel 45° Elbow- Heavy SeriesORFS45 - Female O Ring Face Seal- 45° Elbow DKOS90 - Female Metric Swivel 90° Elbow- Heavy SeriesORFS90 - Female O Ring Face Seal- 90° Elbow CEL - Male Metric- Light SeriesORFS90L - Female O Ring Face Seal- 90° Elbow- Long Drop CES - Male Metric- Heavy SeriesORB - Male O Ring Boss FJIX - Female Swivel- Japanese Industrial StandardSFL - SAE Flange- Low Pressure (Code 61) FKX - Female Swivel- Japanese Komatsu TypeSFL45 - SAE Flange 45° Elbow- Low Pressure (Code 61) SFK - Split Flange- Komatsu TypeSFL60 - SAE Flange 60° Elbow- Low Pressure (Code 61) SFK45 - Split Flange 45° Elbow- Komatsu TypeSFL90 - SAE Flange 90° Elbow- Low Pressure (Code 61) SFK90 - Split Flange 90° Elbow- Komatsu TypeSFH - SAE Flange- High Pressure (Code 62) PW - Pressure WasherSFH45 - SAE Flange 45° Elbow- HIgh Pressure (Code 62) KW - Pressure Washer KaercherSFH90 - SAE Flange 90° Elbow- HIgh Pressure (Code 62)How to Order Custom Hose Assemblies:www.powertrackhose.com 800-365-1577 sales@powertrackhose.com 9Powertrack International’s lightweight Oilfield Vacuum Hose is sturdy but very flexible making it ideal for the transfer of crude oil,brine water, drilling mud, and diesel fuel. This hose is best suited for use where full suction and working pressures are required.PartNumberHoseI.D.(in.)HoseO.D.(in.)WorkingPressure(psi)Min. BendRadius(in.)Approx.Weightlbs. / ft.PT102-24 1-1/2” 1.88” 150 1.5 0.7PT102-32 2” 2.44” 150 2.0 0.9PT102-48 3” 3.50” 150 2.5 1.2PT102-64 4” 4.56” 150 3.0 1.4PT102-96 6” 6.63” 100 4.0 2.3Construction:Reinforcement: Multiple synthetic textile cords withdual helical wires.Cover: SBR/EPDM.Tube: NBR/SBR, RMA IP-2, Class B.Couplings: Crimp-on, KC nipple, cam and groovecoupling, and hammer union.Operating Temperatures: -30ºF to 180ºF.Construction:Petroleum Suction Hose ~ 150 psi and 250 psiPowertrack International’s 150 psi and 250 psi Petroleum Suction Hose are heavy-duty hoses designed for easy handlingand greater flexibility in petroleum suction and discharge applications. 150 psi specifications:PartNumberHoseI.D.(in.)HoseO.D.(in.)WorkingPressure(psi)Min. BendRadius(in.)Approx.Weightlbs. / ft.PT616-32 2” 2.51” 150 10.0 1.3PT616-48 3” 3.52” 150 16.0 2.2PT616-64 4” 4.72” 150 18.0 3.4PT616-96 6” 6.92” 120 22.0 6.2250 psi specifications:Construction:Reinforcement: Spiralled high tensile textile cords with adouble steel helix wire.Cover: Black nitrile.Tube: Black nitrile.Couplings: Cam & groove, shank hose couplings.Operating Temperatures: -40ºF to 200ºF.PartNumberHoseI.D.(in.)HoseO.D.(in.)WorkingPressure(psi)Min. BendRadius(in.)Approx.Weightlbs. / ft.PT617-12 3/4” 1.22” 250 4.9 0.5PT617-16 1” 1.46” 250 5.9 0.6PT617-20 1-1/4” 1.73” 250 6.9 0.7PT617-24 1-1/2” 2.01” 250 8.9 0.9PT617-32 2” 2.64” 250 10.8 1.6PT617-40 2-1/2” 3.11” 250 11.8 1.9PT617-48 3” 3.62” 250 13.8 2.3PT617-64 4” 4.65” 250 17.7 3.0Reinforcement: High tensile synthetic textile with a steelwire helix and 2 anti-static copper wires.Cover: Oil, flame, ozone, weather, abrasion, and sea water-resistant synthetic rubber.Tube: Oil and petrol-resistant, conductive synthetic nitrile black rubber. Couplings: Cam & groove, shank hose couplings.Operating Temperatures: -40ºF to 200ºF.Feature: For suction and discharge of petroleum productswith an aromatic content up to 50%.Oilfield Vacuum Hose10 www.powertrackhose.com 800-365-1577 sales@powertrackhose.com Corrugated Suction and Discharge HosePowertrack International’s Corrugated Oilfield Suction and Discharge Hose is ideal for the transfer of oilfield waste, sludge,and brine water. It is constructed with an oil and fuel-resistant conductive black NPR tube. The synthetic black corrugated cover is oil,weather, and ozone resistant. High tensile synthetic cord with a wire helix and anti-static copper wire provides reinforcement. The temperature range is -22ºF to 180ºF.PartNumberHoseI.D.(in.)HoseO.D.(in.)WorkingPressure(psi)Approx.Weightlbs. / ft.PT103-16 1” 1.38” 150 0.5PT103-20 1-1/4” 1.69” 150 0.6PT103-24 1-1/2” 1.93” 150 0.8PT103-32 2” 2.48” 150 1.2PT103-40 2-1/2” 2.95” 150 1.5PT103-48 3” 3.46” 150 2.0PT103-64 4” 4.61” 150 3.0PT103-80 5” 5.71” 150 4.1PT103-96 6” 6.61” 150 5.6PT103-128 8” 8.78” 150 8.8Reinforcement: High tensile synthetic cord with a wirehelix and anti-static copper wires.Cover: Oil, weather, and ozone-resistant corrugated blacksynthetic rubber.Tube: Oil and fuel-resistant conductive black NBR. Operating Temperatures: -22ºF to 180ºF.Powertrack International’s Ultra High Molecular Weight Polyethylene Chemical Suction and Discharge Hose isdesigned to convey a broad range of chemical solutions. The UHMWPE Chemical Hose is designed with a smooth UHMWPE tube,high tensile textile plies, a helix wire reinforcement, and a blue EPDM rubber cover, providing resistance to weather and chemicals.The UHMWPE Chemical Hose handles temperatures up to 225ºF, depending on the medium and the concentration of the media.PartNumberHoseI.D.(in.)HoseO.D.(in.)WorkingPressure(psi)Min. BendRadius(in.)Approx.Weightlbs. / ft.PT630-UHMWPE-12 3/4” 1.22” 250 4.7 0.4PT630-UHMWPE-16 1” 1.46” 250 5.9 0.5PT630-UHMWPE-20 1-1/4” 1.73” 250 7.9 0.7PT630-UHMWPE-24 1-1/2” 2.00” 250 9.1 0.8PT630-UHMWPE-32 2” 2.56” 250 11.8 1.2PT630-UHMWPE-40 2-1/2” 3.11” 250 15.0 1.6PT630-UHMWPE-48 3” 3.62” 250 18.1 2.0PT630-UHMWPE-64 4” 4.65” 250 23.6 2.6Construction:Reinforcement: High tensile synthetic cord with a wirehelix and anti-static copper wires.Cover: Weather, ozone, and abrasion-resistant blue EPDMrubber.Tube: Chemical and solvent-resistant translucent UHMWPE(ultra high molecular weight polyethylene).Couplings: Cam & groove.Operating Temperatures: -22ºF to 225ºF. Note: Call 800-365-1577 to ensure that the UHMWPE ChemicalHose will handle your specific chemical.Hot Air Blower HosePowertrack International’s Hot Air Blower Hose has excellent heat resistance, making it ideal for transferring hot air between theair compressor and dry bulk tank or bulk material carriers.Construction:Reinforcement: Two braids of high tensile textile cords and dualspiralled, highly flexible steel helical wires.Cover: Heat, abrasion, and ozone-resistant black EPDM rubber.Tube: Black, heat-resistant EPDM rubber.Couplings: Cam and groove, pin lug, short shank couplings, orcombination nipples.Operating Temperatures: -40ºF to 350ºF.PartNumberHoseI.D.(in.)HoseO.D.(in.)WorkingPressure(psi)Min. BendRadius(in.)Approx.Weightlbs. / ft.PT110-32 2” 2.48” 150 6 1.0PT110-48 3” 3.54” 150 9 1.6PT110-64 4” 4.65” 150 12 2.2UHMWPE Chemical HoseConstruction:www.powertrackhose.com 800-365-1577 sales@powertrackhose.com 11Black Rubber Suction HosePowertrack International’s Black Rubber Suction Hose is designed for the transfer of water based liquid fertilizers and pesticides and to haul brine water. It can also be used for both suction and discharge pumping of water and slurries.PartNumberHoseI.D.(in.)HoseO.D.(in.)WorkingPressure(psi)Min. BendRadius(in.)Approx.Weightlbs. / ft.PT100-24 1-1/2” 1.94” 150 8.0 0.7PT100-32 2” 2.44” 150 10.0 0.9PT100-48 3” 3.50” 150 16.0 1.5PT100-64 4” 4.56” 150 12.0 3.9PT100-96 6” 6.69” 150 14.0 4.6PT100-128 8” 8.75” 100 25.0 6.3PT100-160 10” 10.75” 100 40.0 9.1PT100-192 12” 12.94” 100 55.0 10.8Reinforcement: High tensile tire cords with a helixwire.Cover: EPDM blend.Tube: EPDM blend.Couplings: Crimp-on, KC nipple, cam & groove coupling, and hammer union.Operating Temperatures: -40ºF to 190ºF.Jetting HosePowertrack International’s high pressure, heavy-duty Jetting Hose is designed for stripping layers from hard surfacesand for washdown applications. The Jetting Hose’s premium grade cover offers protection against ozone and abrasion.PartNumberHoseI.D.(in.)HoseO.D.(in.)WorkingPressure(psi)PliesofRein.Approx.Weightlbs. / ft.PT24-JETTING-48 3” 3.70” 800 6 Bob will getPT24-JETTING-64 4” 4.81” 800 6 4.9Construction:Reinforcement: Textile.Cover: Abrasion-resistant neoprene/SBR.Tube: Water resistant black SBR.Couplings: Contact Powertrack International for availablefittings.Operating Temperatures: -40ºF to 180ºF.Other sizes available upon request.Reinforcement: Spiralled high tensile textile cords with static wire and four highly flexible steel helix wires. Cover: Abrasion and ozone-resistant. Tan SBR/EPDMblend. Tube: 3/16” thick white natural rubber. FDA compliant.Couplings: Cam and groove, pin lug, short shank couplings, or combination nipples.Operating Temperatures: -22ºF to 176ºF.PartNumberHoseI.D.(in.)HoseO.D.(in.)WorkingPressureat 68ºF(psi)VacuumHG.(in.)Bend Radius(in.)Approx.Weightlbs. / ft.Tan Flextra-24 1-1/2” 2.09” 75 29 4 1.0Tan Flextra-32 2” 2.60” 75 29 4 1.2Tan Flextra-48 3” 3.63” 75 29 6 1.9Tan Flextra-64 4” 4.69” 75 29 9 2.7Tan Flextra-80 5” 5.78” 75 29 12 4.3Tan Flextra-96 6” 6.78” 75 29 15 4.9Construction:Tan Flextra Hose is a bulk transfer hose used to convey non-oily abrasive materials such assand, limestone, plastic pellets, and dry abrasive food products. Construction includes a tan pureten gum rubber tubereinforced with spiral-plied synthetic fabric and a wire helix reinforcement. The corrugated cover is tan plioflex gum rubber with a yellow spiral stripe. The Tan Flextra Hose has a temperature range of -40ºF to 180ºF.®Tan Flextra Hose 12 www.powertrackhose.com 800-365-1577 sales@powertrackhose.com Frac Tank Hose Reinforcement: High tensile synthetic plies with a wirehelix.Cover: Weather, abrasion, and ozone-resistant. Flexible, corrugated, cloth impression, black SBR/EPDM.Tube: Water, air, and oil mist-resistant. Smooth, blackSBR/NBR.Couplings: Crimp-on or banded NPT and frac unions.Operating Temperatures: -22ºF to 185ºF.PartNumberHoseI.D.(in.)HoseO.D.(in.)WorkingPressure(psi)BurstPressure(psi)Approx.Weightlbs. / ft PT25-Frac-96 6” 6.61” 150 450 6.8PT25-Frac-128 8” 8.70” 150 450 9.7Frac Tank Hose AssembliesHose Assemblies with Standard EndsPart Number DescriptionPT25-FRAC-96/STD/43IN 43” Overall (including ends) w/ 6” Standard Frac Tank EndsPT25-FRAC-96/STD/51IN 51” Overall (including ends) w/ 6” Standard Frac Tank EndsPT25-FRAC-128/STD/43IN 43” Overall (including ends) w/ 8” Standard Frac Tank EndsPT25-FRAC-128/STD/51IN 51” Overall (including ends) w/ 8” Standard Frac Tank EndsPT25-FRAC-128/STD/63IN 63” Overall (including ends) w/ 8” Standard Frac Tank EndsPT25-FRAC-128/STD/75IN 75” Overall (including ends) w/ 8” Standard Frac Tank EndsPT25-FRAC-128/STD/240IN 20ft. Length w/ 8” Standard Frac Tank Ends8” Hose Assemblies with West Texas Double Seal EndsPart Number DescriptionPT25-FRAC-128/DBLSEAL/43IN 43” Overall (including ends) w/ 8” West Texas Frac Tank EndsPT25-FRAC-128/DBLSEAL/51IN 51” Overall (including ends) w/ 8” West Texas Frac Tank EndsPT25-FRAC-128/DBLSEAL/63IN 63” Overall (including ends) w/ 8” West Texas Frac Tank EndsPT25-FRAC-128/DBLSEAL/75IN 75” Overall (including ends) w/ 8” West Texas Frac Tank Endswww.powertrackhose.com 800-365-1577 sales@powertrackhose.com 136” and 8” Sizes:3” and 4” Sizes:Construction:Construction:Reinforcement: High tensile synthetic cord with anti-staticcopper wires.Cover: Oil and fuel, weather, and ozone-resistant. Smooth,cloth impression, black nitrile.Tube: Oil and fuel resistant conductive black nitrile.Couplings: Operating Temperatures: -40ºF to 180ºF.Specially designed for high pressure discharge of crude oil for frac tank connections.Ideal for handling fresh and salt water, tank bottoms, crude oil, and drilling mud. The corrugated cover allows for maximum flexibility.PartNumberHoseI.D.(in.)HoseO.D.(in.)WorkingPressure(psi)BurstPressure(psi)Approx.Weightlbs. / ft 3” 3.62 400 Bob will get4” 4.72 400 2.9Steam HosePowertrack International’s Steam Hose is ideal for saturated and super heated steam services up to 450ºF with a250psi working pressure. The Steam Hose has a black or red EPDM tube with high tensile steel wire reinforcement anda black or red EPDM cover.Construction:Reinforcement: High tensile steel wire.Cover: Black or red EPDM. Tube: Black EPDM.Couplings: Ground joint. Operating Temperatures: Up to 450ºF. PartNumberHoseI.D.(in.)HoseO.D.(in.)WorkingPressure(psi)PliesofRein.Approx.Weightlbs. / ft.PT58-BKSTEAM-08 1/2” 0.95” 250 2 0.30PT58-RDSTEAM-08 1/2” 0.95” 250 2 0.30PT58-BKSTEAM-12 3/4” 1.21” 250 2 0.45PT58-RDSTEAM-12 3/4” 1.21” 250 2 0.45PT58-BKSTEAM-16 1” 1.50” 250 2 0.60PT58-RDSTEAM-16 1” 1.50” 250 2 0.60PT58-BKSTEAM-20 1-1/4” 1.80” 250 2 0.85PT58-RDSTEAM-20 1-1/4” 1.80” 250 2 0.85PT58-BKSTEAM-24 1-1/2” 2.10” 250 2 1.10PT58-RDSTEAM-24 1-1/2” 2.10” 250 2 1.10PT58-BKSTEAM-32 2” 2.65” 250 2 1.55PT58-RDSTEAM-32 2” 2.65” 250 2 1.55PartNumberHoseI.D.(in.)HoseO.D.(in.)WorkingPressure(psi)PliesofRein.Approx.Weightlbs. / ft.PT16-YWLAIR-08 1/2” 0.94” 1000 2 0.4PT16-YWLAIR-12 3/4” 1.18” 1000 2 0.6PT16-YWLAIR-16 1” 1.50” 1000 2 0.7PT16-YWLAIR-20 1-1/4” 1.77” 800 2 0.9PT16-YWLAIR-24 1-1/2” 2.08” 800 2 1.2PT16-YWLAIR-32 2” 2.60” 600 2 1.8PT16-YWLAIR-40 2-1/2” 3.15” 500 2 2.4PT16-YWLAIR-48 3” 3.75” 500 2 3.1PT16-YWLAIR-64 4” 4.85” 400 2 4.2Reinforcement: High tensile steel wire.Cover: Smooth, yellow synthetic rubber. Weather and abrasion-resistant.Tube: Black, smooth synthetic rubber. Heat and oil mist-resistant.Couplings: Contact Powertrack International for available fittings.Operating Temperatures: Air: -40ºF to 212ºF.Construction:Powertrack International’s heavy-duty, steel wire reinforced Yellow Wire Braid Air Hose is designed for rough applications in mining, quarries, and construction industries where extra strength is needed to safely handle high pressure and high volume air requirements.Yellow Wire Braid Air Hose14 www.powertrackhose.com 800-365-1577 sales@powertrackhose.com Hose GripsDual LIft Eye Grip Cord Cap Grip~Available with singleor double weave.Cam and GrooveWARNING:UNDER NO CIRCUMSTANCESshould Cam and Groove couplingsbe used for compressed air orsteam serviceAluminum, malleable iron, and stainless steelTYPE A(Male Adapter x Female NPT)TYPE B(Female Coupling x Male NPT)TYPE C(Female Coupling x Hose Shank)Size AluminumPart #Malleable IronPart #Stainless SteelPart #1/2” PT-50-A-AL --- PT-50-A-SS3/4” x 1/2” PT-7550-A-AL --- PT-7550-A-SS3/4” PT-75-A-AL --- PT-75-A-SS1” PT-100-A-AL --- PT-100-A-SS1-1/4” PT-125-A-AL --- PT-125-A-SS1-1/2” PT-150-A-AL PT-150-A-MI PT-150-A-SS2” PT-200-A-AL PT-200-A-MI PT-200-A-SS2-1/2” PT-250-A-AL --- PT-250-A-SS3” PT-300-A-AL PT-300-A-MI PT-300-A-SS4” PT-400-A-AL PT-400-A-MI PT-400-A-SS5” PT-500-A-AL PT-500-A-MI PT-500-A-SS6” PT-600-A-AL --- PT-600-A-SS8” AND* PT-800-A-AL --- ---8” BL* PT-801-A-AL --- ---*Cam & Groove couplings do not interchange in 8” size.Size AluminumPart #Malleable IronPart #Stainless SteelPart #1/2” PT-50-B-AL --- PT-50-B-SS3/4” PT-75-B-AL --- PT-75-B-SS1” PT-100-B-AL --- PT-100-B-SS1-1/4” --- --- ---1-1/2” PT-150-B-AL PT-150-B-MI PT-150-B-SS2” PT-200-B-AL PT-200-B-MI PT-200-B-SS2-1/2” --- --- PT-250-B-SS3” PT-300-B-AL PT-300-B-MI PT-300-B-SS4” PT-400-B-AL PT-400-B-MI PT-400-B-SS5” PT-500-B-AL --- ---6” PT-600-B-AL --- PT-600-B-SS8” PT-800-B-AL --- ---Size AluminumPart #Malleable IronPart #Stainless SteelPart #1/2” PT-50-C-AL --- PT-50-C-SS3/4” PT-75-C-AL --- PT-75-C-SS1” PT-100-C-AL --- PT-100-C-SS1-1/4” --- --- PT-125-C-SS1-1/2” PT-150-C-AL PT-150-C-MI PT-150-C-SS2” PT-200-C-AL PT-200-C-MI PT-200-C-SS2-1/2” --- --- PT-250-C-SS3” PT-300-C-AL PT-300-C-MI PT-300-C-SS4” PT-400-C-AL PT-400-C-MI PT-400-C-SS5” PT-500-C-AL --- PT-500-C-SS6” PT-600-C-AL --- PT-600-C-SS8” PT-800-C-AL --- ---TYPE D(Female Coupling x Female NPT)Size AluminumPart #Malleable IronPart #Stainless SteelPart #1/2” PT-50-D-AL --- PT-50-D-SS3/4” PT-75-D-AL --- PT-75-D-SS1” PT-100-D-AL --- PT-100-D-SS1-1/4” --- --- PT-125-D-SS1-1/2” PT-150-D-AL PT-150-D-MI PT-150-D-SS2” PT-200-D-AL PT-200-D-MI PT-200-D-SS2-1/2” --- --- PT-250-D-SS3” PT-300-D-AL PT-300-D-MI PT-300-D-SS4” PT-400-D-AL PT-400-D-MI PT-400-D-SS5” PT-500-D-AL PT-500-D-MI PT-500-D-SS6” PT-600-D-AL --- PT-600-D-SS8” PT-800-D-AL --- ---TYPE E(Male Adapter x Hose Shank)Size AluminumPart #Malleable IronPart #Stainless SteelPart #1/2” PT-50-E-AL --- PT-50-E-SS3/4” x 1/2” PT-7550-E-AL --- PT-7550-E-SS3/4” PT-75-E-AL --- PT-75-E-SS1” PT-100-E-AL --- PT-100-E-SS1-1/4” PT-125-E-AL --- PT-125-E-SS1-1/2” PT-150-E-AL PT-150-E-MI PT-150-E-SS2” PT-200-E-AL PT-200-E-MI PT-200-E-SS2-1/2” PT-250-E-AL --- PT-250-E-SS3” PT-300-E-AL PT-300-E-MI PT-300-E-SS4” PT-400-E-AL PT-400-E-MI PT-400-E-SS5” PT-500-E-AL --- PT-500-E-SS6” PT-600-E-AL --- PT-600-E-SS8” AND* PT-800-E-AL --- ---8” BL* PT-801-E-AL --- ---www.powertrackhose.com 800-365-1577 sales@powertrackhose.com 15Cam and GrooveAluminum, malleable iron, and stainless steelWARNING:UNDER NO CIRCUMSTANCESshould Cam and Groove couplingsbe used for compressed air orsteam serviceTYPE F(Male Adapter x Male NPT)Size AluminumPart #Malleable IronPart #Stainless SteelPart #1/2” PT-50-F-AL --- PT-50-F-SS3/4” x 1/2” PT-7550-F-AL --- PT-7550-F-SS3/4” PT-75-F-AL --- PT-75-F-SS1” PT-100-F-AL --- PT-100-F-SS1-1/4” PT-125-F-AL --- PT-125-F-SS1-1/2” PT-150-F-AL PT-150-F-MI PT-150-F-SS2” PT-200-F-AL PT-200-F-MI PT-200-F-SS2-1/2” PT-250-F-AL --- PT-250-F-SS3” PT-300-F-AL PT-300-F-MI PT-300-F-SS4” PT-400-F-AL PT-400-F-MI PT-400-F-SS5” PT-500-F-AL --- ---6” PT-600-F-AL --- PT-600-F-SS8” AND* PT-800-F-AL --- ---8” BL* PT-801-F-AL --- ---*Cam & Groove couplings do not interchange in 8” size.TYPE DC(Dust Cap)Size AluminumPart #Malleable IronPart #Stainless SteelPart #1/2” PT-50-DC-AL --- PT-50-DC-SS3/4” PT-75-DC-AL --- PT-75-DC-SS1” PT-100-DC-AL --- PT-100-DC-SS1-1/4” --- --- ---1-1/2” PT-150-DC-AL --- PT-150-DC-SS2” PT-200-DC-AL PT-200-DC-MI PT-200-DC-SS2-1/2” --- --- PT-250-DC-SS3” PT-300-DC-AL PT-300-DC-MI PT-300-DC-SS4” PT-400-DC-AL PT-400-DC-MI PT-400-DC-SS5” PT-500-DC-AL --- PT-500-DC-SS 6” PT-600-DC-AL --- PT-600-DC-SS8” PT-800-DC-AL --- ---TYPE DP(Dust Plug)Size AluminumPart #Malleable IronPart #Stainless SteelPart #1/2” PT-50-DP-AL --- PT-50-DP-SS3/4” PT-75-DP-AL --- PT-75-DP-SS1” PT-100-DP-AL --- PT-100-DP-SS1-1/4” PT-125-DP-AL --- PT-125-DP-SS1-1/2” PT-150-DP-AL PT-150-DP-MI PT-150-DP-SS2” PT-200-DP-AL PT-200-DP-MI PT-200-DP-SS2-1/2” PT-250-DP-AL --- PT-250-DP-SS3” PT-300-DP-AL PT-300-DP-MI PT-300-DP-SS4” PT-400-DP-AL PT-400-DP-MI PT-400-DP-SS5” PT-500-DP-AL --- ---6” PT-600-DP-AL --- PT-600-DP-SS8” AND* PT-800-DP-AL --- ---8” BL* PT-801-DP-AL --- ---Cam and GrooveGasketsSize AluminumPart #1/2” PT-50-G-BU3/4” PT-75-G-BU1” PT-100-G-BU1-1/4” PT-125-G-BU1-1/2” PT-150-G-BU2” PT-200-G-BU2-1/2” PT-250-G-BU3” PT-300-G-BU4” PT-400-G-BU5” PT-500-G-BU6” PT-600-G-BU8” PT-800-G-BU*Dust Caps and Dust Plugsare NOT to be used inPressure Applications forsafety and environmental reasons.Steel Hose MenderSize Part #1/2” PT-DM13/4” PT-DM61” PT-DM111-1/4” PT-DM161-1/2” PT-DM212” PT-DM262-1/2” PT-DM313” PT-DM364” PT-DM466” PT-DM66Round Hole StrainerSize Part #1-1/2” PT-RHS202” PT-RHS252-1/2” PT-RHS303” PT-RHS354” PT-RHS405” PT-RHS506” PT-RHS608” PT-RHS8010” PT-RHS10012” PT-RHS12016 www.powertrackhose.com 800-365-1577 sales@powertrackhose.com Reducing Cam and Groove CouplingsAluminum, brass, and stainless steelWARNING:UNDER NO CIRCUMSTANCESshould Cam and Groove couplingsbe used for compressed air orsteam servicereducingmale adapterxfemale NPT*Parts are produced as a welded fabrication.Size AluminumPart #Stainless SteelPart #2” x 1-1/2” PT-2015-A-AL PT-2015-A-SS*2” x 3” PT-2030-A-AL PT-2030-A-SS3” x 2” PT-3020-A-AL PT-3020-A-SS3” x 4” PT-3040-A-AL -4” x 3” PT-4030-A-AL PT-4030-A-SS*4” x 6” PT-4060-A-AL -6” x 4” PT-6040-A-AL PT-6040-A-SS*Type A Adapter x Female NPT Type B Coupler x Male NPTreducingcouplerxmale NPTSize AluminumPart #Stainless SteelPart #1-1/2” x 1” PT-1510-B-AL PT-1510-B-SS*2” x 1-1/2” PT-2015-B-AL PT-2015-B-SS2” x 3” PT-2030-B-AL -3” x 2” PT-3020-B-AL PT-3020-B-SS*3” x 4” PT-3040-B-AL -4” x 3” PT-4030-B-AL PT-4030-B-SS*Type C Coupler x Hose Shankreducingfemale couplerxhose shankSize AluminumPart #Stainless SteelPart #2” x 1-1/2” PT-2015-C-AL* PT-2015-C-SS*3” x 2” PT-3020-C-AL PT-3020-C-SS3” x 2-1/2” - PT-3025-C-SS3” x 4” PT-3040-C-AL -4” x 3” PT-4030-C-AL PT-4030-C-SS*5” x 4” PT-5040-C-AL* -reducingfemale couplerxfemale NPTSize AluminumPart #BrassPart #Stainless SteelPart #1-1/2” x 1” PT-1510-D-AL* - PT-1510-D-SS*2” x 1-1/2” PT-2015-D-AL - PT-2015-D-SS3” x 2” PT-3020-D-AL - PT-3020-D-SS4” x 3” PT-4030-D-AL PT-4030-D-BR PT-4030-D-SS*5” x 4” PT-5040-D-AL* - -6” x 4” PT-6040-D-AL* - -Type D Coupler x Female NPTType E Adapter x Hose Shankreducingmale adapterxhose shankSize AluminumPart #Stainless SteelPart #2” x 1-1/2” PT-2015-E-AL* PT-2015-E-SS*3” x 2” - PT-3020-E-SS*3” x 2-1/2” - PT-3025-E-SS4” x 3” PT-4030-E-AL PT-4030-E-SS*5” x 4” PT-5040-E-AL* -Type F Adapter x Male NPTreducingmale adapterxmale NPT**The 8” coupler has 4 cam arms and does not interchange.Size AluminumPart #Stainless SteelPart #1-1/2” x 2” PT-1520-F-AL -2” x 1-1/4” PT-2015-F-AL PT-2015-F-SS*2” x 3” PT-2030-F-AL -3” x 1-1/2” PT-3015-F-AL PT-3015-F-SS*3” x 2” PT-3020-F-AL PT-3020-F-SS3” x 4” PT-3040-F-AL -4” x 3” PT-4030-F-AL PT-4030-F-SS*Size Aluminum HardCoat Part #BrassPart #IronPart #3” x 2” PT-3020-DA-ALH PT-3020-DA-BR PT-3020-DA-MI3” x 4” - PT-3040-DA-BR -4” x 3” PT-4030-DA-ALH PT-4030-DA-BR PT-4030-DA-MI6” x 4” - PT-6040-DA-BR PT-6040-DA-MICoupler x AdapterSize Aluminum Part #Stainless SteelPart #1” x 1-1/2” PT-1015-DA-AL* PT-1015-DA-SS*1-1/2” x 1” PT-1510-DA-AL PT-1510-DA-SS*1-1/2” x 2” PT-1520-DA-AL PT-1520-DA-SS2” x 1” PT-2010-DA-AL* PT-2010-DA-SS*2” x 1-1/2” PT-2015-DA-AL PT-2015-DA-SS2” x 2-1/2” PT-2025-DA-AL* PT-2025-DA-SS*2” x 3” PT-2030-DA-AL PT-2030-DA-SS2” x 4” PT-2040-DA-AL PT-2040-DA-SS*2-1/2” x 2” - PT-2520-DA-SS*2-1/2” x 3” - PT-2530-DA-SS*3” x 1-1/2” PT-3015-DA-AL PT-3015-DA-SS*3” x 2” PT-3020-DA-AL PT-3020-DA-SS3” x 2-1/2” PT-3025-DA-AL* PT-3025-DA-SS*3” x 4” PT-3040-DA-AL PT-3040-DA-SS3” x 6” PT-3060-DA-AL* PT-3060-DA-SS*4” x 2” PT-4020-DA-AL PT-4020-DA-SS*4” x 2-1/2” PT-4025-DA-AL PT-4025-DA-SS*4” x 3” PT-4030-DA-AL PT-4030-DA-SS4” x 5” PT-4050-DA-AL -4” x 6” PT-4060-DA-AL PT-4060-DA-SS*5” x 3” PT-5030-DA-AL* PT-5030-DA-SS*5” x 4” PT-5040-DA-AL PT-5040-DA-SS*5” x 6” PT-5060-DA-AL* PT-5060-DA-SS6” x 3” PT-6030-DA-AL PT-6030-DA-SS*6” x 4” PT-6040-DA-AL PT-6040-DA-SS6” x 5” PT-6050-DA-AL PT-6050-DA-SS*8” x 6” PT-8060-DA-AL** -3” coupler x1-1/2” adapter4” coupler x6” adapter3” coupler x2-1/2” adapter5” coupler x6” adapterwww.powertrackhose.com 800-365-1577 sales@powertrackhose.com 17Size Plated SteelNPT ThreadPart #Unplated SteelNPT ThreadPart #316 StainlessSteelNPT ThreadPart #BrassNPT ThreadPart #AluminumNPT ThreadPart #HastelloyNPT ThreadPart #1/2” PT-STC1 PT-ST1 PT-RST1* PT-BST1 PT-AST1 -3/4” PT-STC5 PT-ST5 PT-RST5* PT-BST5 PT-AST5 -1” PT-STC10 PT-ST10 PT-RST10 PT-BST10 PT-AST10 -1-1/4” PT-STC15 PT-ST15 PT-RST15 PT-BST15 PT-AST15 -1-1/2” PT-STC20 PT-ST20 PT-RST20 PT-BST20 PT-AST20 -2” PT-STC25 PT-ST25 PT-RST25 PT-BST25 PT-AST25 PT-HST252-1/2” PT-STC30 PT-ST30 PT-RST30 PT-BST30 PT-AST30 -3” PT-STC35 PT-ST35 PT-RST35 PT-BST35 PT-AST35 PT-HST354” PT-STC40 PT-ST40 PT-RST40 PT-BST40 PT-AST40 -5” PT-STC50 PT-ST50 PT-RST50 - PT-AST50 -6” PT-STC60 PT-ST60 PT-RST60 - PT-AST60 -8” PT-STC80 PT-ST80 PT-RST80 - - -10” PT-STC100 PT-ST100 - - - -12” PT-STC120 PT-ST120 - - - -Shank Hose Couplings Combination Hose NippleCombination Hose Nipple*Made from casting.Plated Steel and UnplatedSteel sizes 1/2” - 2” areavailable in knurled versionupon request.Brass and Aluminum sizes1/2” - 3/4” are available inknurled version uponrequest.Standard Frac Tank Fittings Standard Threaded BlindStandard 3-Piece CouplingWeld-on or ThreadedStandard Threaded Female Size Part #6” PT-FRAC-BLIND-68” PT-FRAC-BLIND-8Size Part #6” PT-FRAC-3PC-68” PT-FRAC-3PC-8 Size Part #6” PT-FRAC-FWO-68” PT-FRAC-FWO-8Size Part #6” PT-FRAC-F-68” PT-FRAC-F-8Size Part #6” PT-FRAC-FTH-68” PT-FRAC-FTH-8Standard Weld-On Female Standard Hose Standard Threaded Tank Size Part #6” PT-FRAC-MTH-68” PT-FRAC-MTH-8Standard Weld-On Tank Size Part #6” PT-FRAC-MWO-68” PT-FRAC-MWO-8Standard O-Ring Threaded Tank Size Part #6” PT-FRAC-MOR-68” PT-FRAC-MOR-8Tank O-RingSize Part #6” PT-FRAC-ORING-68” PT-FRAC-ORING-8Standard Hammer NutSize Part #6” PT-FRAC-NUT-68” PT-FRAC-NUT-818 www.powertrackhose.com 800-365-1577 sales@powertrackhose.com HOSEHydraulic up to 10K psiCatFiresafeB.O.P.OilfieldRotary DrillWaterblastThermoplastic to 40K psiSewer CleaningVacuumTank TruckPetroleum SuctionPVC SuctionChemicalSingle and Double Jacket FireTar and AsphaltFood GradeMarineFuelSteamTeflonPlasticDuctingDockSandblastPaint SprayTwin LineConcrete PumpingLayflat DischargeMaterial HandlingJackhammer Hose AssembliesAir Hose- Including Bulk orHose AssembliesWater Hose- IncludingContractor’s Water HoseAssemblies*COUPLINGSHydraulicMetricCam and GrooveStainless SteelReusableCrimped*COUPLINGS (continued)SwagedPush OnBrassExpansion Joints*ADAPTERSMetricAmericanPipeStainless SteelSteel 37ºO-RingBrass 45ºCLAMPSConcreteHeavy Duty RaisedVictaulic2 - 4 BoltT-Bolt BandingWorm GearQUICK DISCONNECTSHydraulicAirIndustrialHammer Unions*TUBINGPVCUrethaneStainless SteelNylonPlasticPolypropyleneSteelTeflonCopperCoiledVitonTube Assemblies*TUBE FITTINGSMetricStainless SteelSteel*TUBE FITTINGS (continued)CompressionBrassFlareVALVESAirBallCheckGateManifoldGAUGESCompoundLiquid LevelPressureTESTINGCertified TestingAvailable to 25K psi*Metric Sizes AvailableThrough our networkof 3 strategically located distributionwarehouses, we areprepared and eager toservice all of your hoseand fitting requirements.Visit us on the Webwww.powertrackhose.comsales@powertrackhose.comPittsburgh, Pennsylvania1-800-365-1577Houston, Texas1-800-937-2269Long Beach, California1-800-925-3414THREE CONVENIENT LOCATIONS NATIONWIDECorporate Headquarters:4625 Campbells Run Rd.Pittsburgh, PA 15205800-365-1577Phone: 412-787-4444Fax: 412-787-852013225 FM 529, Bldg. EHouston, TX 77041800-937-2269Phone: 713-466-1745Fax: 713-466-3716721 W. 15th St.Long Beach, CA 90813800-925-3414Phone: 562-436-9088Fax: 562-436-5700sales@powertrackhose.comwww.powertrackhose.comArmored BOP Control Line Hose ~ Red BOP Firesafe Hose ~ Grade D Rotary and Vibrator Hose ~ Grade C Rotary Drilling Hose ~ Slim Hole Rotary Drilling Hose ~ Mud Pump Suction Hose ~ Kelly Hose ~ Union Fittings ~ 4SH- Four Spiral Hydraulic Hose ~ R13- Six Spiral Hydraulic Hose ~ R15- Six Spiral Hydraulic Hose ~ 1SN- One Wire Hydraulic Hose ~ 2SN- Two Wire Hydraulic Hose ~ SAE 100R5 Hydraulic Hose ~ SAE 100R12 High PressureHydraulic Hose ~ Oilfield Suction Hose ~ Black Rubber Suction Hose ~ Petroleum Suction Hose ~ UHMWPE Chemical Hose ~ Hot Air Blower Hose ~ Dry Bulk Material Handling Hose ~ Steam Hose ~ Push-On Hose ~ Pressure Washer Hose ~ Jetting Hose ~ Frac Tank Hose ~ Yellow Wire Braid Air Hose ~ Hammer Unions ~ Cam & GrooveDUE TO CONTINUAL PRODUCT IMPROVEMENTS, POWERTRACK INTERNATIONAL, INC. RESERVES THE RIGHT TO ALTER SPECIFICATIONS WITHOUT PRIOR NOTICE.0711