PCR Series - Photoelectric Controller Datasheet

3195 Vickery Rd. North Syracuse NY 13212 | (315) 699 4400 | Unimar.comPCR060813PCR Photoelectric Controller Assembly CAST ALUMINUM BOXPLASTIC HOUSING5 in5 ½ in5 716 in 6 ¼ in1” NPT1” NPTThe PCR Series Photo Control is a combination of precision electronic circuitry, electromechanical output, and a unique molded plastic housing. The PCR was designed and built to meet the demands of the most rigorous requirement of tower and obstruction lighting control. Each unit is factory calibrated to meet FAA and FCC specifications.The electronic circuit, output contactor, and the terminal block are all contained within the front plastic housing. An edge support is molded into the bottom edge of the housing, which allows easy wiring of new and existing installations (see next page). The PCR Series is packaged in a cast aluminum junction box.• Two 30 ampere load contacts • Meets FAA/FCC requirements• Direct replacement of older and newer types (see ordering information)• Stable electronic circuitry• Molded plastic control housing with gasket• Cast aluminum junction box with one-inch hubs, top and bottom• LED Power indication• Surge protected Type: Light actuated electronic circuitry with high current electromechanical output contacts Indication: LED power indicatorOperating Voltage: 120 VAC ± 20% 50/60 Hz 230 VAC ± 20% 50/60 HzOutput Rating: Two SPST N.O. 30 Amp contacts (see connection diagrams)Terminations: Screw terminals for up to #8 AWG wire Mechanical: ABS plastic housing with gasket seal. Multiple knockout holes for optional mounting to Crouse Hinds or Hughey & Phillips aluminum boxesLight Actuation Levels: Energized: 35fc and below; De-energized: above 60fc(Factory Calibrated) General Mechanical Specifications Features3195 Vickery Rd. North Syracuse NY 13212 | (315) 699 4400 | Unimar.comPCR060813PCR Photoelectric Controller Assembly The PCR Series Photo Control has a unique feature that allows the installer to have both hands free while wiring. The plastic front housing of the PCR has a slot at its bottom that slips over the edge of the cast aluminum box. When wiring is complete, simply lift up, insert into the box and secure with four screws.PART NUMBERDESCRIPTION VOLTAGE18001-001 Photo Control with aluminum housing 120 VAC ± 20%18002-001 Photo Control with aluminum housing 230 VAC ± 20%2201-001 Photo Control without aluminum housing (Replacement - Red only) 120 VAC ± 20%2202-001 Photo Control without aluminum housing (Replacement - Red Only) 230 VAC ± 20%2201-003 Photo Control without aluminum housing (Replacement - White/Red) 120 VAC ± 20%2202-003 Photo Control without aluminum housing (Replacement - White/Red) 230 VAC ± 20% Application & Connections Ordeing Information