Phoenix - 85UVF - Flame Scanner Brochure

Product OverviewFeatures & BenefitsThe Fireye Phoenix flame scanners are microprocessor based devices utilizing a solid state flame detection sensor. The flame detectors incorporate an internal flame relay with automatically set ON/OFF thresholds, thereby eliminating the need for a remote flame amplifier or flame switch.Phoenix scanners detect the amplitude of the modulations (the flame “flicker”) that occur within the targeted flame, over a wide frequency. During the detec-tor setup procedure, the amplitudes of the target flame are automatically stored by the flame detector, together with optimum ON/OFF criteria. The appropri-ate sensor gain is automatically selected. Phoenix scanners incorporate full self diagnostics and electronic self checking. The Phoenix 85UVF/IRF is available in multiple models differentiated by detection cell type, levels of hazardous area certifications and agency approvals. The Phoenix 85UVF/IRF flame scanner is powered by 24Vdc. Electricalconnection is via an 8-pin electrical quick-disconnect (QD) for the Standard models and internal terminal blocks for CEX models. An analog 4-20mA output of flame strength is standard.Phoenix Integrated Scanners• Fireye 85UVF self-checking scanners are used to detect 295 to 340 nanometers wavelength ultraviolet emissions. • Typical UV applicaTions: Duct Burners, Industrial Gas Burners, Refinery Applica-tions, Low NOx Burners, Waste Gas Units and Incinerators. • Fireye 85irF self checking scanners are used to detect 830 to 1100 nanometers wavelength infrared emissions. They are suited for continuous or non-continuous burner operation. • Typical ir applicaTions: Duct Burners, Industrial Oil Burners, Refinery Applic-aions, Waste Oil Units and Incinerators. • neMa 4X & ip66 Class I Division 2 Groups A, B, C, D.• reliable inTerFace Simple 4 button keypad and informative LED’s.• coMpaTibiliTy UV, IR and CEX versions.Phoenix scanners provide unparalled ease of installation and operation. With fully automatic flame characterization and optimum gain detection initiated from the streamlined user interface.Fireye Inc. • 3 Manchester Road • Derry, NH 03038 • 603-432-4100 • Fax 603-432-1570 • www.fireye.comPhoenix Integrated Scanners MechanicalHousing: Standard Models: GE Valox CEX Models: Painted AluminumWeight: Standard Models: 3.3 lbs. (1.5 kg) CEX Models: 9.5 lbs. (4.3 kg)Environmental: Standard Models: NEMA 4X & IP66 CEX Models: Exd IIc T6 rated, ATEX certifiedMounting: 1” NPT or 1” BSP (mounting flange ordered separately)Temperature Rating: -40° F to +150° F (-40° C to +65° C)Humidity: 0% to 95% relative humidity, non-condensingCooling/Purge Air: Supply clean, dry, cool air 3/8” NPT or BSP connectionOptical UV Models 295 to 340 nanometers IR Models 830 to 1100 nanometers K3 Models 310 to 500 nanometersElectrical Input Power: 24 Vdc, +20%, -15% supply current 200 mAStatus Indication: Multiple LED indication for flame signal strength, flame relay, ready, target, background select and fault codesElectrical Connection: Standard Models: 8-Pin quick disconnect (QD), use 59-546-xx cable CEX Models: internal terminal blocksRelay Outputs: Flame Relay SPST (N.O.) Fault Relay SPST (N.C.)Contact Rating: Minimum: 10mA @ 5 Vdc Maximum: 2A @ 30 Vdc, 2A @ 230 Vac (Resistive load) Analog Output: Optically isolated 4-20mA dc current referenced to 24 Vdc common, maximum connected load: 750 Ohms. Fireye recommends the 60-2685-X 24 Vdc power supply for best performance and for a SELV rating of the 4-20mA analog output leads.Phoenix-CS2Rev April 18, 20133.59 [91.28]3.72 [94.49]GROUNDING SCREWMOUNTING FLANGE(ORDERED SEPARATELY)DIMENSIONS IN INCHES (mm)PURGE AIRCONNECTIONSIGHT PIPE CONNECTION1.46 [36.97]1.84 [46.79]VIEWING WINDOW4.41 [112]4.13 [105]THREADED 1” BSP3/4” NPT THREADED OPENING FOR CABLE ENTRY5.28 [134]MOUNTING FLANGE1” BSP3/8” THREADED OPENING FOR COOLING AIR8.94 (227) 3.56 (90)Standard ModelsCEX Models(ORDERED SEPARATELY)Fireye Inc. • 3 Manchester Road • Derry, NH 03038 • 603-432-4100 • Fax 603-432-1570 • www.fireye.com