PowerMax Smart Modules Brochure

ENGLISHAVANCIS – THE AVANT-GARDE OF PHOTOVOLTAICS.Since the early 1980s we have been pioneering research into high-performance solar modules with our scientists. As pioneersof CIS technology we are extremely proud of what we have achieved so far, especially that our technology was the first to besuccessfully used for the mass-production of CIS modules. With our innovative history and our multiple world efficiency records,we are extremely proud of a track record that is clear for all to see. AVANCIS stands for advancement in technology, performanceand aesthetics. Or simply put, AVANCIS = advanced solar power.The successful AVANCIS brand is well known on the market under the name PowerMax®. Beneath this umbrella brand all of ourproduct lines are brought together and have one very important thing in common: An extremely high energy yield (kWh per kWp)possible due to spectral sensitivity, excellent low light performance, a low nominal operating cell temperature (NOCT) and a low temperature coefficient. All PowerMax® modules not only meet the highest technological requirements, they are also among themost economical on the market. The basis for this success is our fully integrated industrial production process.SIMPLY SMART: POWERMAX® FOR LARGESYSTEMS AND OPEN SPACES.The PowerMax® SMART modules were specifically developedfor use in large, commercial rooftop systems and open spaces.However, due to their unique mounting profile and their attractive design, they are also suitable for smaller rooftopsystems and architectural solutions.WHY POWERMAX® SMART MODULESARE SO INTELLIGENT.PowerMax® SMART are frameless CIS solar modules that usean intelligent mounting profile of two steel backrails allowinga mounting clamp that is not attached to the front of theglass modules. This allows the glass to be mounted almost seamlessly creating a pleasing look.The backrails on the extremely thin and light PowerMax®SMART modules allow maximum mechanical loads, makingthese modules not only ideal for maximum snow load zonesbut equally suitable for use with extremely steep inclinations.Installation of the frameless modules below angles of 10 percentis even allowed.We think that is pretty SMART.EASY INSTALLATION• Secure and easy front-side mounting of the modules usingan intelligent backrail system (two steel backrails attachedto the back).• Easy handling of the frameless modules due to reducedweight.• The mechanical and electrical construction of each modulehas been optimised for low system costs.HIGHEST YIELD• The broadest spectral sensitivity, the very good perfor-mance in low light conditions, the low nominal operatingcell temperature (NOCT) and the low temperature coefficientensure a high energy yield (kWh/kWp).• The back ventilation and cooling of the frameless modulescontinually optimises the original high energy yield.• The plus sorting of the nominal power guarantees thepaid for power, and more.EXTREME DURABILITY• The module adheres to DIN 1055, maximum snow loadzones and is able to withstand loads of up to 551 kg/m².• An edge isolation between the glass provides long-termprotection against power loss for the solar cells.• The tempered and overlaying front glass offers a verygood stability.• Through a special coating we ensure long-life corrosionprotection of the back rail.ELEGANT DESIGN• Excellent design through cells in an elegant pinstripe look.• The mounting clamps are largely hidden from view behindthe module edge, ensuring an attractive appearancefor the entire system.POWERMAX® SMART – 4 TIMES SMART.MECHANICAL SPECIFICATIONSData measured under standard test conditions (STC)*:ELECTRICAL SPECIFICATIONSYour stamp* Insolation intensity 1,000 W/m² in the plane of the module, module temperature 25 °C and a spectral distribution of the sunlight according to the atmospheric mass (AM) 1.5.Data measured at nominal operating cell temperature (NOCT)* and AM 1.5:* Module operating temperature at 800 W/m² insolation intensity in the planeof the module, air temperature 20 °C, wind speed 1 m/s and open-circuit condition.Data measured at low light intensity:Temperature coefficients:For more information about handling, installation and operation of PowerMax® modules, referto the installation, operating and safety manual for AVANCIS PowerMax® photovoltaic modules.The measurement accuracy of Pnom is ± 3.5 %. As a result of ongoing research and productimprovements, the specifications in this product data sheet are subject to changes withoutprior publication. This data sheet is not allowed to be used for deriving any rights, and AVANCISdoes not accept any liability with regard to and resulting from the use of information containedherein. Installation equipment is not supplied with the product.AVANCIS GmbH & Co. KG,Solarstrasse 3, 04860 Torgau, GermanyTel.: +49 (0) 3421 7388-0 Fax: +49 (0) 3421 7388-111E-Mail: info@avancis.de Web: www.avancis.deFront, rear and side views (from left to right)Cross section through glass, rail and clampEdition: September 2013 · Mat. no.: 9000214 · Data valid for modules produced on/after January 1st2013 starting with serial number: AVANCISXXXXXXX130101XXXX.PowerMax® SMART ValueTemperature coefficient Pnom -0.39 %/°CTemperature coefficient Voc -170 mV/°CTemperature coefficient Isc 0.1 mA/°CTemperature coefficient Vmpp -140 mV/°CThe relative reduction in the module-efficiency at a light intensity of 200 W/m² relativeto 1,000 W/m² at 25 °C module temperature and spectrum AM 1.5 is 6 %.At 500 W/m² the relative improvement in module-efficiency is +1 %.DIMENSIONSPowerMax® SMART 110 115 120 125 130 135Nominal power Pnom 110 W 115 W 120 W 125 W 130 W 135 WTolerance of nominal power Pnom -0/+5% -0/+5% -0/+5% -0/+4% -0/+4% -0/+4%Module efficiency * 10.4 % 10.9 % 11.4 % 11.9 % 12.3 % 12.8 %Aperture efficiency 11.5 % 12.1 % 12.6 % 13.1 % 13.6 % 14.2 %Open-circuit voltage Voc 56.6 V 57.5 V 58.5 V 59.5 V 60.5 V 61.5 VShort-circuit current Isc 3.10 A 3.10 A 3.11 A 3.12 A 3.13 A 3.14 AVoltage at mpp Vmpp 41.4 V 42.7 V 43.9 V 45.1 V 46.3 V 47.4 VCurrent at mpp Impp 2.65 A 2.69 A 2.73 A 2.77 A 2.81 A 2.84 ALimiting reverse current Ir 5.0 A 5.0 A 5.0 A 5.0 A 5.0 A 5.0 AMax. system voltage Vsys (IEC) 1,000 V 1,000 V 1,000 V 1,000 V 1,000 V 1,000 VMax. system voltage Vsys (UL) 600 V 600 V 600 V 600 V 600 V 600 VPowerMax® SMART 110 115 120 125 130 135NOCT 40.0 °C 40.0 °C 40.0 °C 40.0 °C 40.0 °C 40,0 °CNominal power Pnom 82.0 W 85.8 W 89.5 W 93.2 W 96.9 W 100.7WOpen-circuit voltage Voc 53.0 V 53.9 V 54.8 V 55.8 V 56.8 V 57.8 VShort-circuit current Isc 2.48 A 2.48 A 2.48 A 2.48 A 2.48 A 2.48 AVoltage at mpp Vmpp 38.5 V 39.8 V 41.0 V 42.1 V 43.3 V 44.4 VPowerMax® SMART ValueExternal dimensions 1,587 x 664 mm²Thickness 37.0 mmWeight 16 kgJunction box protection class IP65Dimensions of the junction boxes 70 x 64 x 13 mm³Cable lengths ( plug | socket) 170 | 300 mmCable cross section 2.5 mm²Connector type LC4Dimensions in mm• Qualified, IEC 61646• Safety tested, IEC 61730• UL 1703• Ammonia resistance tested• Periodic inspection105 110 115 120 125 130105 W 110 W 115 W 120 W 125 W 130 W-0/+5% -0/+5% -0/+5% -0/+5% -0/+4% -0/+4%10.0 % 10.4 % 10.9 % 11.4 % 11.9 % 12.3 %11.0 % 11.5 % 12.1 % 12.6 % 13.1 % 13.6 %56.0 V 56.7 V 57.4 V 58.1 V 58.8 V 59.5 V3.22 A 3.23 A 3.25 A 3.26 A 3.27 A 3.28 A39.0 V 40.2 V 41.4 V 42.5 V 43.7 V 44.9 V2.70 A 2.74 A 2.78 A 2.82 A 2.86 A 2.90 A5.0 A 5.0 A 5.0 A 5.0 A 5.0 A 5.0 A1,000 V 1,000 V 1,000 V 1,000 V 1,000 V 1,000 V600 V 600 V 600 V 600 V 600 V 600 V105 110 115 120 125 13040.0 °C 40.0 °C 40.0 °C 40.0 °C 40.0 °C 40.0 °C78.3 W 82.0 W 85.8 W 89.5 W 93.2 W 96.9 W52.4 V 53.1 V 53.8 V 54.4 V 55.1 V 55.8 V2.60 A 2.60 A 2.60 A 2.60 A 2.60 A 2.60 A36.2 V 37.3 V 38.5 V 39.6 V 40.8 V 41.9 V(37.0)