Solar Modules DCH 235

0,000,801,602,403,204,004,805,606,407,208,008,80AU-I-Kennlinien bei 25 °C5,0 10,0 15,0 20,0 25,0 30,0 35,0 40,0VU-I-Kennlinie 100 W/m² U-I-Kennlinie 200 W/m²U-I-Kennlinie 500 W/m² U-I-Kennlinie 800 W/m²U-I-Kennlinie 1.000 W/m² ? Use of pre-selected cells only ? Narrow output tolerance ? Plus-sorted modules delivered ? Optimal utilization of low insolation ? Wide temperature range ? High resistance to mechanical loads ? UV—and ozone-resistant ? Flash data for each module provided ? Self-supporting aluminium frame ? System voltage up to 1000 V Technical data subject to change. Last update 12/2011 Presented by: DCH 230P 230 Wp DCH 235P 235 Wp www.dch-group.de from the Raw material to the finished Module 10 Year Product Warranty 10 Year Limited Performance Warranty for 90% of nominal power 25 Year Limited Performance Warranty for 80% of nominal power DCH 235P Ihr Solar und LED Experte Your solar und LED expert DCH Energy GmbH In der Wehbach 17 57080 Siegen-Germany info@dch-group.de www.dch-group.de 0102030405060708090100110120%Leistungskennlinie100 200 300 400 500 600 700 800 900 1.000W/m²rel. Wirkungsgrad 0 °C rel. Wirkungsgrad 25 °Crel. Wirkungsgrad 50 °C rel. Wirkungsgrad 75 °CModule Efficiency up to 14,4% DCH Energy GmbH In der Wehbach 17 57080 Siegen-Germany info@dch-group.de www.dch-group.de Electrical data: Technical Data subject to change. Last update 12/2011 Characteristic data: Boundary values : Mechanical data: DCH 235P Ihr Solar und LED Experte Your solar und LED expert 40 Nominal power 230 Wp 235 Wp Voltage at max. power Umpp 29,81 V 30,18 V Current at max. power Impp 7,72 A 7,79 A Open circuit voltage Uoc 36,86 V 37,06 V Short circuit current Isc 8,30 A 8,39 A Nominal power tolerance -0/+3% -0/+3% Temperature coefficient Isc 4,66mA/K 4,66mA/K Temperature coeffizient Usc Module efficiency -145,19mV/K 14,1% -145,19mV/K 14,4% Number of bypass-diodes 6 pcs 6 pcs Junction box Protection type: IP65 with spring-cage term. Data applies to Standard Test Conditions (STC): Insolation 1000W/m² with an AM of 1,5 and a cell temperature of 25°C Solar cells per module 60 Solar cell type Poly-crystalline high-efficiency cells 156 x 156 mm² (quadratic) Connection Junction box with 6 bypass-diodes Cable/connector 4 mm² PV wire with MC4®-connectors Cable length Ca. 900 mm each Maximum system voltage 1000 VDC Operating temperature range -40 + 85°C Dimensions (tolerance +/- 1 mm) 1655 mm x 989 mm Frame height (tolerance +/- 1 mm) 40 mm Weight ca. 19,6 kg Laminate/Glass 3,2 mm ESG extra-white impact resistance acc. to IEC 61215 Colouring Back side: white Hail test Max. pressure allowed: Max. 5400 N/m² Maximum diameter of 25mm with an impact speed of 23 m/s 35 Front: hardened safety glass 60 polycrystalline solar cells 156 mm x 156 mm in EVA (Ethylene-vinyl-acetate) Back side: Tedlar foil Design 989 mm 1655 mm