Professional Solar Products

SolarWedge - Model XD - Commercial Tilted Racking System Installation Guide

(805)486-4700 (805)486-4799 - fax 1551 S. Rose Ave. Oxnard, CA 93033 www.prosolar.com All Angles 6-1/2" +/- 3/4" Front Extension Height* 15 Degree 19" +/- 3/4" 10 Degree 14-1/2" +/- 3/4" 5 Degree 11" +/- 3/4" Rear Extension Height* *Height from roof surface to bottom of support rail Standard SolarWedge® Technical Information > Load Tested and engineered to 30 lbs. per ft2 (approx.110mph wind load equivalent) > Utilizes FoamJack® Laboratory tested to 2,870 lbs. vertical and 2,615 lbs. side lateral pull out using a 3/8" x 6" lag bolt (secured at approx. 6-1/2"). > Structurally attached to the roof - extremely important in areas with potential horizontal and vertical seismic movement such as California. > Available in 5o, 10o or 15o angles. Optimized to help reduce typical peak summer demand charges. Assembly of the SolarWedge® Components of the SolarWedge® system easily integrate with the new XD support rail. Three Sizes Available SW5-6 (5 Degree Kit) SW10-6 (10 Degree Kit) SW15-6 (15 Degree Kit) 12 ea. Leveling Studs 6 ea. 1" Dia. Aluminum Rear Posts 6 ea. 1" Dia. Aluminum Front Posts 12 ea. 1.5" Dia. Aluminum Bases 12 ea. Aluminum Compression Nuts 12 ea. Aluminum Lower Rail Supports 36 ea. 24 ea. 12 ea. 3/8" SS Flat Washers Attachment Parts List (Per Box) Shipped in a shoe box sized package, the SolarWedge XD attachment components offer easy handling and storage along with reduced shipping costs. Not to scale Rear View 3" XD Support Rail 8' Span between attachments for commercial construction only Fully Assembled 3" XD Rail Lower Support Compression Nut Jam Nut/ Jam Nut/ Jam Nut 12 ea. 3" x 3" Aluminum Seal Plates 5" 12" 6" 3.3 kW DC* Attachment Box Dimensions *using 210 WDC modules Each box contains enough attachments to install up to 3.3 kWDC 10 Degree Box Dimensions Illustrated 4' O.C. 8' O.C. SWXD20080219 Specifications are subject to change without notice. Patent #6,360,491 and D547262 Washer Washer 3/8" x 4" SS 3/8" SS Jam Nuts 3/8" SS Flat Washers SolarwedgeXD_brochure