TiSUN - Solar Water Heating System

THERMOSIPHON CLOSED LOOP SYSTEM SIMPLE AND EFFICIENT SOLAR HOT WATER SYSTEM SOLAR SYSTEMS FOR THE ROUGH REALITY ECO-FRIENDLY SECURE IN SUPPLY ENERGY-EFFICIENT DURABLE THANKS TO MATURE TECHNOLOGY COST-EFFICIENT The image shown THSY 300- 2H Unit. BIS APPROVED COLD WATER HOT WATER E T R S O L A R R U N SOLAR FLOW SPECIFICATION * Alternatively SS316. Unit No. 3/3A, Survey No. 56, Opp. Mittal Print & Pack, Bilalpada, Gaurai Pada, Vasai (E), Thane - 401 208. Tel.:+91-250-6590111 / 6590112 | E-mail:info.india@tisun.com | www.tisun.com Designation THSY 150 1H THSY 300 2HTHSY 125 1H Quantity Dimension Gross Area Aperture Area Coating Absorber Type Heater Cover Glass Looks Frame Rear wall insulation Side insulation Solar Collector THSY 250 2H 1 1030 x 2030 mm 2.09 m² 1.92 m² High- selectivity Harp 9 Nos. of Al Fins 4 mm thick solar glass Without Rivets / Screws Al Section Powder Coated 50 mm mineral wool layer 20 mm mineral wool layer Tank LPD Diameter Length Corrosion protection Max. water pressure Max. water temp. Insulating material Insulation thickness Connections Shell Material Shell Thickness Inner Coating Dish End Thickness Heat exchanger Heat exchanger Area Max. pressure (solar fluid) Tank outer Cover Material Empty weight Full weight with safety valve 125 L 500 mm 1150 mm Magnesium anode 3 bar o90 C Rigid polyurethane foam 50 mm ½” *SS 304 1.0 mm Passivated 1.2 mm Jacketed shell 2 0.975 m 2 bar Prepainted Galvanized MS Sheet 32 kg 157 kg 150 L 500 mm 1300 mm Magnesium anode 3 bar o90 C Rigid polyurethane foam 50 mm ½” *SS 304 1.0 mm Passivated 1.2 mm Jacketed shell 2 0.975 m 2 bar Prepainted Galvanized MS Sheet 39 kg 189 kg 250 L 580 mm 1800 mm Magnesium anode 3 bar o90 C Rigid polyurethane foam 50 mm ½” *SS 304 1.0 mm Passivated 1.4 mm Jacketed shell 2 1.161 m 2 bar Prepainted Galvanized MS Sheet 46 kg 296 kg 2 1030 x 2030 mm 2 x 2.09 m² 2 x 1.92 m² High- selectivity Harp 9 Nos. of Al Fins 4mm thick solar glass Without Rivets / Screws Al Section Powder coated 50 mm mineral wool layer 20 mm mineral wool layer 300 L 580 mm 1800 mm Magnesium anode 3 bar o90 C Rigid polyurethane foam 50 mm ½” *SS 304 1.0 mm Passivated 1.4 mm Jacketed shell 2 1.57 m 2 bar Prepainted Galvanized MS Sheet 54 kg 354 kg TP VALVE CLOSED LOOP Material Thickness Corrosion Protection Frame Collector Tank Connections Inter connecting Pipe Material, Diameter Insulating Material THSY 500 4H 4 1030 x 2030 mm 2 x 2.09 m² 2 x 1.92 m² High- selectivity Harp 9 Nos. of Al Fins 4mm thick solar glass Without Rivets / Screws Al Section Powder coated 50 mm mineral wool layer 20 mm mineral wool layer 500 L 580 mm 2400 mm Magnesium anode 3 bar o90 C Rigid polyurethane foam 50 mm ¾” *SS 304 1.0 mm Passivated 1.4 mm Jacketed shell 2 2.73 m 2 bar Prepainted Galvanized MS Sheet 79 kg 579 kg North Office : 2107, Sector 71, Mohali, Punjab-160062 Contact : 0172- 2229000 / 9717593776 / 9779096858 / 9357894840 TiSUN-EDES Solar (India) Pvt. Ltd. Steel 2.5 mm Hot dip Galvanized + Powder coated Compression fitting dia. 22 mm 1 3 /", with double nipple and elbow to /" for solar connection 2 4 SS Corrugated Hose Elastomer rubber with protective PE film Page 1 Page 2