TM2500+ Mobile Aeroderivative Gas Turbine Product Sheet

GE Power & WaterDistributed PowerGE Power & Water now offers a faster, more reliable solution for bridging the gap between energy outages and dependablepower generation. As the newest enhancement of GE’s trailer-mounted unit, the TM2500+ offers a 31% increase inpower in a more compact footprint with less time than everbetween contract and commissioning.Perfect for on-demand power, the TM2500+ is capable of producing up to 31 megawatts of power—achieving full power inless than 10 minutes.Key Product Features and Benefits• Developed specifically to respond to the need for fast or mobile power• Small Footprint 24 m x 7 m (78 ft x 21 ft)• Flexible to operate on either natural gas or liquid distillate fuels• Dual Frequency—50/60 Hz quick conversion• Low emissions with demineralized water injection 25 ppm (gas)/42 ppm (liquid)• Quick to dispatch• Easy to operate and maintainTM2500+™ Mobile Gas Turbine Generator50/60 Hz Applications fact sheetfact sheetExhaust Stack SwitchgearTransportationStingerBrush BDAX 62-170ER GeneratorGE LM2500+Gas TurbineTransportationJeepTrailerGooseneck InletPlenumInlet FilterAssemblyControl Room& Battery RoomTurbine EnclosureFire SuppressionLube OilCoolersHydraulicStarterFuel/WaterPumpsFor more information, contact your GE representative or visit www.ge-aero.comTM2500+ is a trademark of the General Electric Company. Copyright © 2013, General Electric Company. All rights reserved.GEA17258I (10/2013)Improved DesignNow packaged on a two-trailer system with a top-mounted air inletfilter and exhaust assemblies, GE’s TM2500+ requires 77% lessspace than its predecessor. Both the inlet filter assembly and theexhaust duct are mounted directly on top of the main trailer assembly, making the TM2500+ easily transported by ship, air, or road to even the most remote locations around the globe. The improved TM2500+ design offers an increased number of quick-disconnect fittings, which simplifies and accelerates the installation process allowing for assembly and setupin just one day. Leveraging experience gained from over 60,000 hours of operationin a variety of applications around the globe, the TM2500+ is easilyconverted from 50 to 60 Hz and is capable of operating on eithernatural gas or liquid distillate fuels. The unit also offers the optionof water injection for NOx suppression down to 25 ppm. TheTM2500+ incorporates GE’s lightweight LM2500+ aeroderivativegas turbine with the Brush 170ER generator. ApplicationsGE has sold more than 2,000 LM2500 and LM2500+ units in powergeneration applications worldwide, making it the world’s mostexperienced, reliable gas turbine solution for temporary powerapplications.• Supplementing power to the grid for peak shaving or managing seasonal demands• Overcoming generation constraints such as hydropower shortages• Backup power to support maintenance, overhauls, or outages at power plants or for large-scale projects• Power for remote areas• Emergency power support during natural disasters• O&G and Mining applicationsTM2500+ General Arrangement Auxiliary TrailerModelWater Injection(NOx = 25 ppmvd@15% O2)Output(MW)Heat Rate(Btu/kWh)HeatRate(kJ/kWh)Efficiency(%)PressureRatioPower TurbineSpeed (RPM)Exhaust Flow(lb/sec)Exhaust Flow(kg/sec)ExhaustTemp (F)ExhaustTemp (C) 60 HZTM2500+ None 30.688 8830 9316 39 22.5 3600 192.2 87.2 959.1 515TM2500+ Yes 30.988 9285 9796 37 22.8 3600 196.6 89.2 906.0 485.650 HZTM2500+ None 26.190 9246 9755 37 21.2 3000 184.5 83.7 925.0 496.1TM2500+ Yes 26.190 9705 10239 35 21.3 3000 187.2 84.9 879.0 470.6*60 Hz based on a Brush air-cooled generator w/brushless excitation @ 0.90 PF, 59°F cooling air, 13.8 kV (50 Hz @ 11.5 kV), Ambient air: 59°F, 60% RH, Sea level