Transmitter-NT-32

NT-32 NanoTEM Transmitter GDP-32II with Embedded NanoTEM® Transmitter The NT-32 embedded NanoTEM® transmitter is the latest addition to the Zonge transmitter line. The transmitter is mounted in the card cage of a GDP-32II multifunction receiver. FEATURES ? Output: NanoTEM® (bipolar currents to 3.5 A peak) ? 50% duty cycle ? 1.5 microsecond shutoff into 20 m loop (NanoTEM®) ? Lightweight, battery powered ? Full Computer-Control using RS-232C Zonge Offices: Arizona, Alaska, Nevada, Colorado and Oregon Headquarters: 3322 E. Ft. Lowell Road, Tucson, AZ 85716, USA (800) 523-9913 Tel: (520) 327-5501 Email: zonge@zonge.com Fax: (520) 325-1588 Web: http://www.zonge.com 20130123 SPECIFICATIONS FOR THE NT-32 TEM TRANSMITTER Electrical Input voltage: 10 to 14 VDC Peak output current: 3.5 A Current monitor output: 1V / A Automatic over-current shutdown (set for 4.25 A) MOSFET IGBT power output current switch Automatic fault detection Transmitter control from GDP receiver, XMT-series controller, or external computer with RS-232C port Controls & Displays Control and display on the embedded version is managed through the keyboard and display of the GDP-32II Fault Conditions (Shown on the LCD display) Over/Under Voltage Over Current Over Temperature IGBT Failure Output Jacks Current monitor terminals (1 V/A) Output current terminals External battery: 10 to 14 VDC Power connector: 3-pin military twist-lock Power External battery: 10 to 14 VDC Power connector: 3-pin military twist-lock Options Waterproof case with sealed front panel and connectors Case size: 22 x 28 x 18 cm (8.7 x 11 x 7.1”) Weight: 5 Kg (11lb) (without batteries) Embedded NanoTEM® Transmitter Specifications subject to change without notice © Copyright 2013, Zonge International, Inc.