Electrical Engineering Equipment For Energy Management
-
PremiumManufactured by Harp Renewables Limitedbased in IRELAND
Another element of Harp Renewables is LED Lighting solutions. We offer energy reduction solutions with LED lighting and take a full view of every aspect of energy usage in order to determine the very best method to save money and reduce carbon emissions. Part of being an LED installer, our electrical engineer’s design, choose and spec the correct type of fitting to meet your requirements. ...
-
PremiumManufactured by Eliopig S.r.l.based in ITALY
Stainless steel tubs and tanks: Eliopig proposes tanks for green maize made of stainless steel AISI304, complete with mixing groups and with an electric engine of 5,5 HP. Tanks have a capacity that varies from 100q to 500q. Eliopig also produces stainless steel tanks, both insulated and for the water and whey storage from 100q to 400q. Furthermore, there is the possibility to install cooling ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating with superheated steam is similar to heating with ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The sets contain all -required components for the relevant application, from gas sampling to operator control and display units in a compact design. Sets are easy to configure and provide considerable user benefits thanks to reduced requirements for planning, engineering, installation, training, and maintenance. The Set BGA measuring system consists of the four measuring components ULTRAMAT 23 ...
-
Manufactured by Beijing GFUVE Electronics Co., Ltd.based in CHINA
GF1021 single phase portable energy meter test system used to test single phase energy meter error. Adopt mature signal synthetic and power amplifier technology, high precision voltage source and current source output. Widely used in lab and field, and then as single phase standard source. The portable meter test equipment offers high functionality combined with an excellent menu guided operation ...
-
Manufactured by Star Packer Drilling Equipmentbased in TURKEY
Engine 2,2 kw 1400 rev/min (Electrical Engine). Volume 575 It. Diameter of the mixer output 2 inch ...
-
Manufactured by Vision Turning Componentbased in INDIA
Vision Turning Component is an Industrial Earthing Parts Manufacturer, we are committed to providing customized solutions that meet our customers’ unique needs. In the world of electrical engineering and safety, the significance of proper earthing cannot be overstated. Earthing plays a crucial role in safeguarding lives, equipment, and infrastructure from electrical faults and ...
-
Manufactured by Capstone Green Energybased in USA
Can be paralleled up to 30MW of ...
-
based in CANADA
End-to-end electric vehicle consulting and engineering services. Solutions for organizations pursuing mobility product electrification. Electric Vehicle Consulting & Engineering Solutions: Exro Vehicle Systems offers electric vehicle consulting and engineering services that optimize the generation and management of electric power through intelligent controls. Connect with the Exro Vehicle ...
-
Manufactured by Tianjin Lishen Battery Joint-Stock Co., Ltd.based in CHINA
Lishen automotive battery adopts power battery with LFP and NCM technical route, which is applied in electric passenger vehicle, electric bus, and electric special vehicle. "Consumer electronic li-ion battery for foundation, Power li-ion Battery for development", Lishen is dedicated to providing customers with first-class products and services. Lishen ESS Battery adopts power battery that is ...
-
based in FRANCE
Specific drone development or customization of light drone (ULM Class 6). ASMAN Technology offers a range of rotary wing drones specifically developed for carrying payload from 5 to more than 200kg over more of less distances and in harsh environments. Equipped with electric or 4-stroke engines, single rotor or counter-rotating rotors, they cover a very wide range of uses: surveillance mission ...
-
Manufactured by Hailo Wind Systems Gmbh & Co. Kgbased in GERMANY
Our TOPlift+ – ladder-guided service lifts, prized across the globe and in accordance with the most-modern safety standards. The TOPlift+ is ideally suited for retrofitting into pre-existing wind farms as well as for offshore uses and lattice ...
-
Distributed by Electric Motor Service Limitedbased in CANADA
At Electric Motor Service Limited's Apparatus Service Division, we have two shop locations. We have the capability to repair AC Motors, DC Motors, and Generators up to 20,000HP. All repairs are carried out in house including machine work. We have lathes up to 48' swing, balancing up to 25 Ton, Babbitt bearing repair, mig or tig welding, and our rewind department uses a Samatic automatic-winding ...
-
Manufactured by Switchgear Power Systems LLCbased in USA
The Switchgear Power Systems Power Distribution Centers are custom engineered, environmentally controlled, pre-fabricated enclosure built to house electrical equipment. Each PDC is designed to meet the specific needs of a project. SPS Power Distribution Centers set the standard for flexibility, reliability and performance. ...
-
Manufactured by Cleveland-Cliffs Inc.based in USA
Modern vehicles use a variety of structural components to protect passengers and internal systems. In the event of a collision, you want the structural components to absorb energy and/or deform in a controlled and predictable way. Cliffs’ Steel Tubes As Reinforcement – known as C-STAR™ protection - when used in combination with structural components, contributes to the ability ...
-
Manufactured by Zhengzhou Azeus Machinery Co,.Ltdbased in CHINA
Flexible and movable biopellet machine design; widely used in small wood pellet plant or home fuel pellets making. Capacity ranges from 40KG/H to 550KG/H, various models for choice. For more details. please contact ...
-
Manufactured by O.C.R.E.M. srlbased in ITALY
O.C.R.E.M. is a reference point for the construction of generator sets for single machines and power plants. Continuous investments in technology combined with constant attention to researching and developing new solutions have earned the company a leading position in the production of 3 to 2,500 kVA generator sets. The engines used in constructing the generator sets are furnished by leading ...
-
Manufactured by Enginuity Portable Grid (EPG)based in USA
The CQ-800 is a sound attenuated power module housed in a 30’ ISO container with 4” insulation and is rated for 800 kW standby power. It has a critical grade silencer, an on board voltage selection switch, a Cummins QST-30 engine, PCC digital controls with full unit to unit paralleling, 110% containment of all engine fluids, and World Class ...
-
Manufactured by Aetna Plastics Corp.based in USA
ETFE (ethylene-tetrafluoroethylene modified copolymer) is often referred to by DuPont’s trade name, Tefzel®. ETFE provides excellent resistance to chemicals, abrasion, corrosion and weather as well as excellent mechanical strength and stiffness. It also has a low dielectric constant, uniform electrical properties, a continuous service temperature of 300° F and retains its abrasion ...
-
Manufactured by OEM Data Delivery, Division of OEM Controls Inc.based in USA
OEM Data Delivery’s BT (Bluetooth) Tracker is a simple device that can go on any and all equipment, attachments and tools to collect crucial utilization and location data on fuel-powered engines, electric-powered motors, and even non-powered equipment. At construction, mining, aggregate, utility, agriculture, and other jobsites, the BT Tracker is ideal for managing earth-moving equipment, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you