Only show results in Virginia? Ok

Gas Infrastructure equipment for Fossil Energy

  • Premium

    MCZ - Inspection Station and Test Bench for Fuel Cells

    Automatic test bench to check fuel cells with automatic recording of characteristic U/I line, characteristic gas stoichiometry line, dynamic load behavior, characteristic line with different cell temperatures, gas dampening states, and operating pressures.

    By Umwelttechnik MCZ GmbH based in Bad Nauheim, GERMANY. from Inspection Station and Test Bench for Fuel Cells Product line

  • Premium

    AEREON - Model 245 - Flame Front Generator Pilot

    The Model 245 Fuel Efficient Flare Pilot is a high alloy, stainless steel pilot composed of fuel gas line, ignition line, inspirator and optional thermocouple. The pilot head assembly includes a 310 stainless steel flame retention nozzle and wind shroud for extended service life capable of sustaining a stable flame in winds of up to 150 mph. Fuel ...

    By AEREON based in Austin, TEXAS (USA). from Flame Front Generator Pilot Product line

  • Premium

    AEREON Retrax - Model 270 - Electronic Pilot

    The Model 270 RETRAX is a high-tech, retractable, electronic pilot which meets the technical requirements of our clients. This advanced design allows the plant operators to lower the RETRAX pilots individually or all at once for ease of maintenance. Since the RETRAX can be lowered from grade, operators need not wait for a plant shut down to ...

    By AEREON based in Austin, TEXAS (USA). from Electronic Pilot Product line

  • Premium

    Hilliard - Pneumatic Start Assembly

    Hilliard produces a broad line of pneumatic starters. These starters are positive displacement, expander type motors powered by either air or gas. The starter carries more acceleration torque and cranking speed characteristics than what is needed to start industrial type gas engines. The starter is equipped with a clutch option. Hilliard's ...

  • Premium

    Custom Filtration Systems

    HILCO's staff of engineers is always willing to design a system for your particular needs. Call today with your specific application requirements.

  • Premium

    Hilliard - Hyflow Reclaimers

    Hilliard reclaimers are ideally suited for reclaiming insulating or refrigeration compressor oils or for any application which requires a high degree of purification. Reclaimers restore contaminated oils to a like-new condition. Dirty oil can be purified and re-used to save on oil costs. Simple to operate, easy to maintain, this system extends ...

    By The Hilliard Corporation - Star Systems Filtration Division based in Elmira, NEW YORK (USA). from Hyflow Reclaimers Product line

  • Premium

    AEREON Energex - Model 250 - High Alloy, Stainless Steel Pilot

    The Model 250 Energex Pilot is a high alloy, stainless steel pilot which combines a high voltage electronic excitor and a high energy spark rod to provide rapid, reliable ignition. More importantly, the Energex pilot provides instantaneous re-ignition if the pilot should ever lose its flame. This pilot system uses a fuel gas line much like other ...

    By AEREON based in Austin, TEXAS (USA). from High Alloy, Stainless Steel Pilot Product line

  • Premium

    Rotork - Model HPG Range - Pipeline Actuators

    The HPG range of pipeline actuators are designed to use pipeline gas as the motive power source. They utilise our robust scotch yoke mechanism field proven the world over in all types of fluid power applications. Manual override is a standard feature of the range. Our design incorporates a separate cylinder for hydraulic override to ensure ...

    By Rotork plc based in Bath, UNITED KINGDOM. from Pipeline Actuators Product line

  • Premium

    Model QTW150 Range - Manual Quarter-Turn Gear Operators

    Robust, rugged manual gearboxes designed for use in the  water and gas pipeline markets. Torque range up to 150 Nm (111 lbf.ft).  Ratio 40:1.. Output flange F05 / F07. Bore Ø 22 mm. Self-locking gearing. IP65 minimum sealed unit. Standard temperature range -20 to +120 °C (-4 to +250 °F). Optional padlock See PUB131-001 for ...

    By Rotork plc based in Bath, UNITED KINGDOM. from Manual Quarter-Turn Gear Operators Product line

  • Premium

    Rotork - Model GO Range - Gas Over Oil Pipeline Actuators

    The GO range of pipeline actuators are designed to use pipeline gas as the motive power source. They utilise our robust GH and RH quarter-turn prime movers and are field proven in installations around the world. Control configurations are available to meet virtually any operational requirements.

    By Rotork plc based in Bath, UNITED KINGDOM. from Gas Over Oil Pipeline Actuators Product line

  • Premium

    Impact - High Integrity Modular Pneumatic Actuator

    The Midland-ACS IMPACT is a high integrity modular pneumatic actuator control assembly in 316L stainless steel, used for the control and sequencing of process valve actuators on oil and gas platforms/pipelines. Whether it be a standard shut off circuit or an intricate control system, IMPACT can be tailored to meet the requirements of your project.

    By Rotork plc based in Bath, UNITED KINGDOM. from High Integrity Modular Pneumatic Actuator Product line

  • Premium

    Shand & Jurs Biogas - Model 97200 - Flame Check

    The Shand & Jurs Biogas 97200 Flame Check provides an in-line barrier against flame flashback in small gas lines. They are typically installed in pilot lines supplying fuel burning devices used in flares and waste gas burners. They are also used in vent piping servicing manometer pressure taps and diaphragm regulators.

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA). from Flame Check Product line

  • Premium

    GE Jenbacher - Model Type-3 - Gas Engine

    Long service intervals, maintenance-friendly engine design and low fuel consumption ensure maximum efficiency in GE Energy’s type 3 engines. Optimised engine components prolonging service, life even when using non-pipeline gases such as landfill gas. The Type-3 stands out in its 500 to 1,100 kWe power range due to its technical maturity and ...

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Gas Engine Product line

  • Model PE80 - Natural Gas Pipe

    Produced from high density polyethylene pressure pipe applications, which is one of PE80 yellow. PE80 natural gas for homes and businesses used since 1960  in high pressure and shock-resistant and chemical-resistant because it can be used safely Long lasting and high performance across the globe due to having 95% Pe80 gas pipes are ...

    By Kuzeyboru based in Aksaray, TURKEY. from Natural Gas Pipe Product line

  • Model HCNG Series - High-Pressure Compressed Natural Gas Dryer

    Pressure through 5000PSIG/345 BarG. HCNG systems are ideal for large gas flow continuous duty service after the natural gas compressor. Systems are completely self-contained with pre-wired and pre-piped components. One tower purifies while the other regenerates.

    By Pioneer Air Systems based in Wartburg, TENNESSEE (USA). from High-Pressure Compressed Natural Gas Dryer Product line

  • Bolted Bonnet Globe Valves

    Sizes: 2' up to 60'. Pressure: 150 LBS up to 2500 LBS. Temperature: 600ºC. Standards: API, API6A, API6DSS, BS, MSS, ANSI, ASME, ASTM, DIN.

    By Ampo based in Idiazabal – Gipuzkoa, SPAIN. from Bolted Bonnet Globe Valves Product line

  • UnpluggedCNG - CNG Compressor

    The UnpluggedCNG combines a proven, industry-leading  CleanCNG™ non-lubricated ‘W’ compressor block with the world’s most popular natural gas combustion engine with 200 or 300 horsepower configurations.

    By Clean Energy based in Newport Beach, CALIFORNIA (USA). from CNG Compressor Product line

  • LNG Transport & Terminals

    Natural Gas is often sourced long distances from consumers. For shorter distances (less than 3000 km), transport by pipeline is generally used. Over longer distances, it is more economical to transform the Natural Gas into Liquefied Natural Gas (LNG) for transport. One cubic meter of LNG is equivalent to 600 m3 of Natural Gas, making the volume to ...

    By Cryostar SAS based in Hésingue, FRANCE.

  • Gravel Filters

    Gravel filters are in-line devices installed in biogas gas pipelines as condensate water traps and back-flame arresters. Filling material is usually coarse gravel with granular size between 30 and 60 mm. An external water trap device allows for continuous disposal of condensate water. PROGECO gravel filters can be fitted with several optional ...

    By Progeco srl based in Brescia (BS), ITALY. from Gravel Filters Product line

  • Humidur - Model E - Fast-Curing System

    Humidur® E is the fast-curing system within the Humidur® product range. This Norsok M-501 approved coating is used to protect infrastructure in workshops of larger volume. With this single-layer and fast-curing product, the client will reduce the production costs tremendously. When the downtime needs to be minimized, Humidur® E is the ...

    By Acotec NV based in Erembodegem, BELGIUM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you