Only show results in Connecticut? Ok

Gasification Systems equipment for Fossil Energy

  • Premium

    CECO CCA - Low-NOx Burners (LNB)

    Through years of experience and knowledge, we have patented innovative technologies designed to reduce nitrogen oxide (NOx) emissions for new or existing coal, oil, and gas fired boilers. Our CCA brand Low-NOx Burners (LNB) are configured to stabilize the combustion process and allow the unit to be operated at lower excess O2 by utilizing a flame ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO CCA Combustion Systems Product line

  • Premium

    ZETIAN - Pulverized Coal Bunker CO/O2 Analysis System

    Pulverized coal bunker CO/O2 analyzer is an electrical instrumentation equipment designed for blast furnace coal injection system online continuous detection of gas composition. Gas in the mill is sampled by instrument sampling probe installed on the mill (or mill outlet piping).Under the action of jet pump, sampling gas through probe filtering, ...

  • Premium

    ANDRITZ - Model BDS - Biomass Belt Drying System

    Biomass drying - necessary pretreatment for further processes. ANDRITZ supplies the complete process, not only for sludge treatment, but also for biomass drying - from wet milling to drying, fine milling and pelleting, all from a single source.

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA. from Belt, Drum, and Fluid Bed Dryers Product line

  • Premium

    CECO CCA - Overfire Air (OFA) Systems

    Overfire Air (OFA) systems divert a portion of the combustion air away from the primary combustion zone. Our CCA Combustion Systems brand Overfire Air system, deeply stages combustion for enhanced nitrogen oxide (NOx) reduction. By utilizing a unique port design to ensure advantageous air and fuel mixing, our OFA system can minimize NOx, achieving ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO CCA Combustion Systems Product line

  • Premium

    ERG V-tex - Syngas and Biogas Cleaning

    Whether the requirement is for cleaning tars from biogases generated from a hot gasification process, or sulphurous compounds or VOCs from biofuels generated from an anerobic digestion process, V-tex can be the solution.

    By ERG (Air Pollution Control) Ltd based in Horsham, UNITED KINGDOM. from Scrubbing Technology Product line

  • EMISPEC - Gaseous Fuel Production for Endothermic Thermal Conversion Process

    Biomass gasification is an endothermic thermal conversion process whereby a solid fuel is converted into a combustible gas. The product gas consists of carbon monoxide, carbon dioxide, hydrogen, methane, trace amounts of higher hydrocarbons (ethane), water, nitrogen (with air as oxidant) and various contaminants, such as small char particles, ash, ...

    By EMISPEC based in Quebec, QUEBEC (CANADA).

  • Mothermik - Wood Electrification Systems

    The fully automatic working Mothermik® Wood Electrification Installation with a wood logistic system designed to work fully automatically is new and, so far, unique on the market.

    By Mothermik GmbH based in Pfalzfeld, GERMANY.

  • Biochar

    ZeroPoint Biomass Gasification Systems produce biochar as a by-product. Biochar is fixed carbon in the form of highly porous charcoal and is produced through thermo-chemical processes such as biomass gasification. Biochar is composed of carbon that plants extracted from the atmosphere through photosynthesis to form plant matter. When that plant ...

    By ZeroPoint Clean Tech, Inc. based in Potsdam, NEW YORK (USA).

  • Coal Gasifier - Model FT-CG013 - Coal Gasification System

    Now in Pakistan, Filtech International is pioneer in introducing Gasifier Technology which is another source of gas. No need of LPG and Natural Gas. New way of burning!Benefits of using Coal Gasifier System:It can save fuel consumption costs (compared to Diesel Oil, LPG and Furnace Oil) of about 70-80%• Returns very short investment (usage 16 ...

    By Filtech International based in Faisalabad, PAKISTAN.

  • Gasification Systems

    The Tulsa Combustion team has diverse experience in the use of non-conventional fuels and the processes needed to burn them cleanly.  Gasification and other process steps may be necessary to obtain low emissions and to accommodate corresponding mechanical and metallurgical requirements. Applications in which such special needs arise are air ...

    By Tulsa Combustion based in Sand Springs, OKLAHOMA (USA).

  • Combined Heat and Power (CHP)

    Combined heat and power (CHP) integrates the production of usable heat with power (electricity), in one single, efficient process. CHP generates electricity whilst also capturing usable heat that is produced in this process. This contrasts with more conventional ways of generating electricity where a vast amount of heat is simply wasted.  In ...

    By Energy Innovations based in Leiston, UNITED KINGDOM.

  • Gasification Systems

    Best suited for hard and dry materials including; plastic, paper, wood, cardboard, fabrics, bubble wrap, plastic film, rubber, etc. Material is shredded and then milled to a fine powder. The powder is then transformed into pellets of a consistent size and density. The pellets are then fed into the gasifier where, under high temperatures, the ...

    By TerraStar Energy, LLC based in Lumberton, NORTH CAROLINA (USA).

  • Novo Energy - Advanced Gasification System

    Novo has continuously refined and advanced the patented features of the ACS technology, including the pneumatic pulsing of the fuel bed.  Novo’s technology advancements include a pulse bed gasification system, the Aireal Gasification System (“AGS”).  The AGS technology is designed for gasification of various biomass ...

    By Novo Energy, LLC based in Fort Collins, COLORADO (USA).

  • Novo Energy - Biomass Energy Systems

    Novo provides innovative, community-scaled solutions for renewable energy generation from woody biomass and other solid fuels. The biomass energy systems that Novo provides can either employ the Aireal Gasification System or the Aireal Combustion System to best fit the client requirements for energy conversion.

    By Novo Energy, LLC based in Fort Collins, COLORADO (USA).

  • Biomass Conversion Boiler

    Biomass is regarded a carbon-neutral, renewable and often abundant energy source, and as such it can be a sustainable alternative to fossil fuels. There is a strong political desire to implement renewable energy and especially local supply of it in many countries. This has led to economic incentives for conversion to biomass-based energy ...

    By Burmeister & Wain Energy A/S (BWE) based in Allerød, DENMARK.

  • KRR - Model PWT - Mobile Pressure Wave System

    The technology used to deliver the KRR Mobile Pressure Wave Technology (Bang & Clean) service was developed by the Swiss company BANG&CLEAN TECHNOLOGIES AG. It has been continually evolved for more than a decade to provide optimum cleaning efficiency. Shock waves are created using a finely controlled gas mixture to gradually remove ...

    By KRR ProStream based in Guildford, UNITED KINGDOM.

  • Combined Heat and Power (CHP) System

    High efficiency due to lean burn combustion: Maximized fuel efficiency in fixed installations of combustion engines is generally achieved by applying the concept of lean burn. Due to this principle, the engine can use a higher compression ratio and thus a higher level of efficiency and more efficient fuel use. However, lean burn engines demand ...

    By Meva Energy AB based in Hisings Backa, SWEDEN.

  • Model 101 - Gasification Technology (SGT)

    The SES Gasification Technology (SGT) process is differentiated from other commercially proven gasification technologies due to its ability to cleanly and economically convert nearly all solid carbonaceous fuels into synthesis gas, or “syngas”—the building block of a multitude of energy and chemical products.

    By Synthesis Energy Systems, Inc. (SES) based in Houston, TEXAS (USA).

  • EKOMAT - Hot Water and Heating Oil Boiler

    EKOMAT - Hot water and heating oil EKOMAT boilers designed for economic heating of heat carriers, such as water or heating oil, with output ranging from 200 to 6,000 kW, built-in Weishaupt natural gas burners. 95 % thermal efficiency of hot water boiler with pre-heated combustion air, at water output temperature of 190 C. The unit is suitable for ...

    By ENVITEAM s.r.o. based in Vysoká pri Morave, SLOVAKIA.

  • Model 7000 - Ace Minicem

    Instrument can operate on fuels ranging from Kerosene, LCD, HSD, LSHS, F.O, NATURAL GAS, COAL etc. Customer can feed the program for non-standard fuel codes. Calorific value is based on locally available fuels. CO2 Excess Air and combustion efficiency reading are calculated as per BS 845 User friendly interface with the operator by means of ...

    By Acegas based in Mumbai, INDIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you