Charcoal Briquette Machine Uses In The Small Charcoal Briquette Production Line
Charcoal Briquette Machine
Protecting the environment is the responsibility of people. Nowadays, environmental protection is very important in various countries, and policies related to environmental protection are constantly being introduced. The burning of traditional charcoal is also a major factor causing environmental pollution. So now is the time to invest in charcoal briquette machine equipment, the use of wood chip charcoal determines its economic benefits.
Small Charcoal Briquette Production Line
The minimum output of the charcoal briquette machine is 1 ton per day, so the characteristics of the small-sized charcoal machine equipped with the air dryer are particularly reasonable. High thermal efficiency: Airflow drying uses material and gas co-current operation. The material temperature and air temperature can reach the proper state from the beginning to the end, and the drying time is short, so the higher drying temperature can be used. The airflow carbonization furnace carbonizes the quality and output of the finished carbon, so the application of the carbonization furnace in the charcoal briquette production line is very important.
At the same time, the negative gasification surface is continuously renewed due to the dispersion and agitation during drying, and therefore, the heat transfer process of the drying is strong. The small charcoal briquette production line includes raw materials hammer mill, dryer, charcoal briquette machine, and carbonization furnace. These links are complementary. The airflow dryer has the following advantages: because the airflow speed is high, the material is well dispersed in the gas phase, and the entire surface of the material can be used as an effective area for drying. Therefore, the limited area of drying is greatly increased. The mechanism charcoal produced by charcoal briquette machine can replace non-renewable resources such as coal and gas not only environmental protection and sanitation.
Small Charcoal Briquette Production Line Processing Method
1. Crushing. The raw material is crushed into particles by a pulverizer.
2. Drying. Then the particles through the dryer drying, do not want to grasp the moisture.
3. Mechanism Charcoal Making. After drying the material through the charcoal briquette machine into a stick.
4. Finally, through carbonization furnace carbonization. After cooling, forming the finished charcoal.
Mechanism Charcoal Characteristic
Mechanism charcoal is a waste renewable energy fuel, calorific than the same raw materials of charcoal, higher than the general coal, smokeless, tasteless, clean sanitation. It can be widely used for home heating, barbecue food international market demand is large. It can replace coal or heavy oil fired steam boiler in industry, also be used as chemical raw materials for deep processing of activated carbon, silicon carbide, crystalline silicon, and so on. Mechanism charcoal is the carbon disulfide plant, mosquito - repellent incense plant, copper processing plant, foundry essential raw materials. Fusmar machinery as a responsible manufacturer, the purpose is to create good equipment for the majority of customers.
Charcoal briquette machine equipment produces the mechanism charcoal for people to use while ensuring environmental protection. Fusmar charcoal briquette machine equipment has complete specifications, perfect detection means, novel design, stable performance, and convenient operation. The products are sold all over the country and exported to overseas. It is your best choice.
No comments were found for Charcoal Briquette Machine Uses In The Small Charcoal Briquette Production Line. Be the first to comment!