- Home
- Companies
- Tamuz Electronics Ltd.
- Products
- Tamuz - 12/24VDC Automotive Wireless ...
Tamuz - 12/24VDC Automotive Wireless Charger Module
Wireless charging is increasingly becoming the preferred method of maintaining battery power in mobile devices, with most of the latest designs from the major manufacturers including wireless charging as standard.
The AL2 series Podsole has been elegantly designed to allow passengers to charge both wireless and USB charging devices on the move. The two retaining clips and non-slip buttons secure the device into place permitting the wireless charging of all wireless-enabled smart devices, while the USB connector can charge another device like a phone/tablet simultaneously.
The Podsole is totally versatile and can be connected to both 12Vdc and 24Vdc electrical systems without adjustment. It has also been designed for both OEM and retrofit applications and can be mounted to any seat back using 4 screws that are hidden behind tamperproof covers. Due to the durable polyurethane compound encompassing the electronic components, comprehensive protection is provided against dust and liquid ingress to IP65.
The advanced electronic design will detect the charge status of the device and alter the charging process accordingly. This ensures that whatever device is connected, be it Apple, Android, iPad, phone, or tablet, it will always be charged as fully as time and capacity allow. Two LEDs indicate the chargers are operational.
Designed for integration into passenger vehicles.
Accepts both 12Vdc and 24Vdc.
- Approved EN50498, EN50155, and ISO7637-2. E marked (Reg10) and CE marked.
- Phone communicates every millisecond to establish correct charge.
- Foreign object detection & activation.
- Convenient wide input of 9-32Vdc in one standard casing.
- LED to confirm correct operation.
The Alfacharge range has been designed to meet the rigorous standards required for onboard commercial vehicle applications including EN50498, EN50155, ISO7637-2, and is both CE and E marked (Reg10). The casings are made from V0 rated (self-extinguishing) high impact polycarbonate and the PCB is populated by computer-controlled SMT for maximum accuracy and durability.
Input voltage range: 9-32Vdc
Output power: Wireless Charger: Nominal 5W; USB Charger: 10W for BC1.2 and 12W for Q.C 3.0
Application: Wireless Charger: Charges wireless-enabled devices; USB Charger: Charges all USB devices inc. Apple and Android
Transient voltage protection: Meets ISO7637-2 International standard for 12/24V vehicles and EN61000.4.4 and 4.5 for rail
Tx-Range: 5mm
Offload current (quiescent current): Combined 10mA
Power conversion efficiency: Wireless Charger: 50%-60%; USB Charger 90%
Operating temperature: -25ºC to +40ºC
Storage temperature: -25ºC to +100ºC
Operating humidity: 95% max., non-condensing
Casework: Grey polycarbonate body
Connections: Input: 6.3mm push-in flat blade connectors
Output: USB type ‘A’ single-socket – tested to 10,000 mating cycles
Output indicator: Green/blue LED output indication
Mounting method: Box with mounting screw holes – screws provided. Can also be installed by clips or another bespoke method
Safe area protection:
Overcurrent
Limited by the current sensing circuit
Overheat: Limited by the temperature sensing circuit
Overvoltage and Undervoltage: Limited by sensing circuit
Reverse Polarity: Limited by sensing circuit
Transients: Protected by filters and rugged component selection
Catastrophic protection: Internal fuse
Approvals: 2014/30/EU The general EMC directive
Regulation 10 The automotive directive
93/68/EEC The CE marking directive
Designed to: EN50498, EN61373, EN45545-2, EN50155, EN50121-3-2, ISO 7637-2 & R118
Markings: CE and E marked
IP Ratings: IP65 (Not USB connector)
Manufacture:
AlfaTronix
Input voltage range:
9-32Vdc
Application:
Wireless Charger: Charges wireless enabled devices; USB Charger: Charges all USB devices inc. Apple and Android
Transient voltage protection:
Meets ISO7637-2 International standard for 12/24V vehicles
Tx-Range:
5mm
Off load current (quiescent current):
Combined 10mA
Power Conversion Efficiency:
Wireless Charger: 50%-60%; USB Charger 90%
Storage Temperature:
-25?C to +100?C
Operating humidity:
95% max, non-condensing
Casework:
Grey polycarbonate body
Connections: Input Output Ground:
Input: 6.3mm push-in flat blade connectors Output: Wireless transmission <200kHz
Output Indicator:
Green/blue LED output indication
Mounting Method:
Box with mounting screw holes – screws provided. Can also be installed by clips or other bespoke method
Safe area protection: Over Current:
Limited by current sensing circuit
Approvals:
2014/30/EU The general EMC directive Regulation 10 The automotive directive 93/68/EEC The CE marking directive
Markings:
CE and E marked
IP Ratings:
IP65 (Not USB connector)
Output Power:
Wireless Charger: Nominal 5W; USB Charger: 10W for BC1.2 and 12W for Q.C 3.0