Blackhawk - Model USB2000 - JTAG Emulator
The USB2000 JTAG Emulator has been replaced by the USB200 JTAG Emulator (P/N: BH-USB-200, SKU: 12208). While manufacturing of the USB2000 model has been discontinued, support for customers using this model continues. The Blackhawk USB2000 Controller is a small and lightweight controller designed for the unique requirements of the Texas Instruments TMS320C2000 DSP developers. Built upon the advanced technology of the highly-popular USB510, this 3rd generation controller achieves the cost/performance balance required by the C2000 development community. The compact controller pod requires no external power source. Power is derived directly from the PC’s USB port.
The controller supports the standard 14-pin JTAG h...
The controller supports the standard 14-pin JTAG header and voltage ranges from 3.3 to 5.0v. The USB host port permits communications with the host PC and the bi-color status LED gives visual indication of the controllers state.
A free add-on to the USB2000 Controller is the Blackhawk FlashBurn utility. This scriptable utility follows the freely available Texas Instruments API and algorithms for programming C2000 devices with on-chip flash. BHFlashBurn integrates seamlessly with the Flash API allowing the ability to Clear, Erase and Program on-chip flash on the target device.
Blackhawk also has available an optional Isolation Adapter which protects from ground loop voltage, harsh environments and new, untested designs. Supports 3.3-5.0v targets with TI 14-pin connections.
Blackhawk JTAG Emulators are available from a world wide network of industry resellers.
Features
- Low-Cost XDS510™-class Controller
- Plug n’ Play USB Host Interface.
- Bus powered, no external power required.
- Supports TI C2000 Digital Signal Processors:
- F283xF281xF280xF280xxLF240x
- 3.3/5.0 volt device I/O support.
- Bi-Color Status LED (red/green).
- Standard 14-pin JTAG Header Connector.
- Blackhawk FlashBurn utility add-on.
- Optional Isolation Adapter available.
Benefits
- Inexpensive Alternative
- Easy to Install
- Compact, simple and reliable
- Will not need to be replaced for updated DSPs
- Visual Indicator shows status continuously
- Add-on's and Options for a small investment
SYSTEM REQUIREMENTS AND COMPATIBILITY
Operating Systems
- Windows® 2000/XP/Vista/7/8 (32-bit)
- Windows® XP/Vista/7/8 (64-bit)
Development Environments
- Code Composer Studio v3.3
- Code Composer Studio v4 (eclipse)
- v4.0, v4.1, v4.2, and later
- Code Composer Studio v5 (eclipse)
- v5.0, v5.1, and later
Other Requirements
- Available USB port
- CD-ROM drive for driver installation
- Target HW with TI 14-pin JTAG header or appropriate pin converter
IN THE BOX
- JTAG Emulator
- 6' (2m) USB Cable
- Installation CD
- Quick Start Guide
- Product Warranty Terms and Conditions
Customer reviews
No reviews were found for Blackhawk - Model USB2000 - JTAG Emulator. Be the first to review!