- Home
- Equipment
Refine by
Ees Energy Equipment & Supplies
11 equipment items found
Manufactured by:EES - Environmental Energy Services based inSandy Hook, CONNECTICUT (USA)
CoalTreat® is EES’ fuel chemistry innovation that has proven to be highly effective in mitigating problems attributed to furnace slagging and heat transfer surface fouling in coal-fired utility and industrial boilers. CoalTreat® is applied to the fuel pre-combustion, customized to each plant’s fuels and specific objectives, and has been successfully deployed on several large ...
Manufactured by:EES - Environmental Energy Services based inSandy Hook, CONNECTICUT (USA)
The MH Series employs customized Magnesium based chemical solution to address SO3 slagging and fouling issues for a range of oil fired units improving heat transfer efficiency and reducing air ...
Manufactured by:Elektra Elektronik GmbH & Co Störcontroller KG (EES) based inBacknang, GERMANY
In control and monitoring systems, there is a frquent demand for a simple fault indicator to be used as universally as possible. The wiring effort should be limited to a minimum; there is no space for additional controlling elements left. The devices of the series SSM are simple, very compact fault annunciator units for switchboard panel mounting. They provide LED displays with wide reading ...
Manufactured by:Elektra Elektronik GmbH & Co Störcontroller KG (EES) based inBacknang, GERMANY
The two-wire transmission system ZS8A was especially designed for cable-saving and immune to disturbance transmission of messages, commands and analog values over control lines with up to 15 km distance. The ZS8A system has no certain demand on the quality of the used cable fortransmission, it has a high disturbance immunity against couplings from supply or signalling lines run in parallel. ...
Manufactured by:Elektra Elektronik GmbH & Co Störcontroller KG (EES) based inBacknang, GERMANY
The two-wire variant of the modular telecontrol system MFW was especially designed for data transmission on electrically isolated two-wire cables. There is no need of laying special cables in the ground. The common, often existing signal cables can be used for data transmission. There are no specific cable quality requirements, so that even on very old cables transmission is often possible. Only ...
Manufactured by:Elektra Elektronik GmbH & Co Störcontroller KG (EES) based inBacknang, GERMANY
This variant of the MFW modular telecontrol system was developed for data transmission on "singlemode" or "multimode" optical fibres. The telecontrol system always consists of 2 stations which transmit the respective data in point-to-point configuration. The use of optical fibres as transmission medium guarantees a robust, interference-free transmission over long distances, even in harsh, ...
Manufactured by:Elektra Elektronik GmbH & Co Störcontroller KG (EES) based inBacknang, GERMANY
The MFW offers a wide range of transmission media for the transmission of e.g. digital and analogue values or states from measuring instruments which are coupled via field buses. A unique feature is the radio transmission over different frequency bands which are free of charge and registration free as well as radio subject to ...
Manufactured by:Elektra Elektronik GmbH & Co Störcontroller KG (EES) based inBacknang, GERMANY
For unoccupied or large installations an on-site fault annunciator equipment is not sufficent. The supervisors must be informed continuously about the operation and failure conditions and if necessary to be able to take action also from the ...
Manufactured by:Elektra Elektronik GmbH & Co Störcontroller KG (EES) based inBacknang, GERMANY
EES has been known for over 40 years as a manufacturer of reliable and innovative fault indication technology. The indication modules are the simplest form of fault annunciating ...
Manufactured by:Elektra Elektronik GmbH & Co Störcontroller KG (EES) based inBacknang, GERMANY
The basic fault annunciator series BSM-C - easily adaptable to your application with just a few settings. The BSM-C is available in 6 different sizes from 8 to 48 signal inputs. Because of its easy and intuitive handling and parameterisation via DIP switches the BSM-C is suitable for all classic annunciator applications. Numerous options like integrated repeat relays, redundant power supply or ...
Manufactured by:Elektra Elektronik GmbH & Co Störcontroller KG (EES) based inBacknang, GERMANY
The MFW Modular Telecontrol Network has been specially designed for the signal transmisson on live cables and cable screens. If control cables are missing or there is no network coverage, the MFW Powerline telecontrol system is suitable, which uses a very safe carrier-frequency process for signal transmission and has therefore proven itself for use in harsh, interference-contaminated industrial ...
