- Home
- Equipment
Refine by
Schmid Energy Equipment & Supplies
10 equipment items found
Manufactured by:Schmid Energy Solutions based inEschlikon, SWITZERLAND
Clean boiler tubes are essential for the service life and efficiency of a system. All boiler tubes are cleaned with periodic compressed air pulses during ...
Manufactured by:Schmid Group based inFreudenstadt, GERMANY
Based on n-type material PERL cells have a long life expectancy and achieve an efficiency potential of 25 %. Combined with the per se bifaciality of this cell architecture up to 40 % higher energy harvest in PV installations can be achieved. The simple manufacturing process based on the SCHMID co-diffusion leads to best of class conversion ...
Manufactured by:Schmid Energy Solutions based inEschlikon, SWITZERLAND
With the “HLT-100 compact” hot air turbine, electricity can be generated with a wood firing system from a thermal offtake of 300 kW. Due to their complexity and maintenance requirements, other systems – such as ORC systems or steam turbines – only become worthwhile as large-scale systems with a thermal capacity above 2 MW. In many cases, heat offtake all year round cannot ...
Manufactured by:Schmid Group based inFreudenstadt, GERMANY
In a unique and innovative process, the Multi Busbar Connector connects solar cells to strings with 12 round wires and 20 soldering pads per wire at high-speed. The aesthetic cell design turns modules into a premium product with 6 – 9 W more power ...
Manufactured by:Schmid Energy Solutions based inEschlikon, SWITZERLAND
Up to 900 kW nominal capacity and up to a maximum fuel moisture content of M 35, electrical industrial hot air blowers are available for igniting the fuel in the combustion tray or on the moving grate. From a nominal capacity of 900 kW and up to a maximum fuel moisture content of M 55, ignition burners run with propane gas can be used for the UTSR and UTSW combustion ...
Manufactured by:Schmid Energy Solutions based inEschlikon, SWITZERLAND
Fuels with an extremely high calorific value or low ash melting point, such as particleboard waste, old timber, corn, rice ...
Manufactured by:Schmid Energy Solutions based inEschlikon, SWITZERLAND
The UTSR boiler unit is equipped with a flat feed grate and also suitable for fuel with a high ash content. The fuel is passed into the furnace from the rear of the furnace on the flat feed grate with high-alloy casting grate bars. The grate bars are designed that they overlap on both sides and the minimum fuel slips through the grate. Furthermore, the grate is designed to enable a clear, uniform ...
Manufactured by:Schmid Group based inFreudenstadt, GERMANY
In recent years SCHMID has developed several equipment for the production of bifacial solar cells. This cell type absorbs light and generates electricity on both surfaces and achieves up to 30 % higher yield than conventional cells, if suitably installed in open areas or flat ...
Manufactured by:Schmid Group based inFreudenstadt, GERMANY
A large part of the red light (long wave) penetrates conventional solar cells without power generation. Since the introduction of PERC (Passivated Emitter Rear Cell) technology this light is exploited as well: A dielectric layer on the back of the cell reflects the light which penetrates through to the rear side without generation of charge carriers. The photons thus obtain a “second ...
Manufactured by:Schmid Group based inFreudenstadt, GERMANY
Unlike standard cells and PERC, which both use an aluminum-alloy BSF, PERT (Passivated Emitter Rear Totally Diffused) cells have a diffused rear surface. That means, with p-PERT the emitter of p-type based wafer is formed with phoshphorus diffusion and BSF is realized with boron doping. PERT cells do not show the considerably light-induced degradation and can be adapted to ...