- Home
- Equipment
Refine by
Barysol Energy Equipment & Supplies
8 equipment items found
Manufactured by:Barysol GmbH based inWeikersheim, GERMANY
Whenever only a small amount of space is available, use is generally made of monocrystalline modules. Because the silicon content of the cells is purer, their efficiency is particularly high. Around 15 % less surface area is needed than with other modules for the same output. The cell voltage is normally also slightly higher. Monocrystalline modules currently have a life expectancy of over 30 ...
Manufactured by:Barysol GmbH based inWeikersheim, GERMANY
The most simple and most economical way of using the electricity from a photovoltaic installation is through a grid-connected system. The direct current generated by the modules is transformed by the inverter into 230 V alternating current and fed entirely into the public grid. The energy needed for the house is then purchased as before from the selected energy provider.Depending on the type of ...
Manufactured by:Barysol GmbH based inWeikersheim, GERMANY
These self-supporting units (sometimes described as "autarkic" in technical circles) are primarily found on objects that do not have any access to electricity from the mains, e.g. on camping sites or summer houses in gardens. In such cases, the operator's prime objective is to have his or her own power source. With the aid of storage batteries, insular solutions offer the possibility of being ...
Manufactured by:Barysol GmbH based inWeikersheim, GERMANY
String inverters are the most commonly used inverters in photovoltaics and are noted for their excellent value for money. They have higher voltages than module inverters and also have slightly higher ...
Manufactured by:Barysol GmbH based inWeikersheim, GERMANY
Central inverters are large inverters that are usually accommodated in a room of their own. The efficiency of these units is particularly high, but they need plenty of room and are relatively expensive, which is why they are generally only used for large photovoltaic ...
Manufactured by:Barysol GmbH based inWeikersheim, GERMANY
Polycrystalline modules have a somewhat lower silicon content, but are more environmentally friendly to manufacture. They therefore have a lower level of efficiency and need a greater surface area for the same output. Because the price per Watt often turns out lower, they are nevertheless frequently used for large installations. In terms of their service life and reliability, polycrystalline ...
Manufactured by:Barysol GmbH based inWeikersheim, GERMANY
Various chemical elements are used in the production of amorphous modules. The original output decreases heavily in the first 1,000 hours of service, but this degradation has already been taken into account in their manufacture, which is why amorphous modules have a higher output when first delivered. After the initial aging period, the output remains stable. Thanks to the new thin-layer ...
Manufactured by:Barysol GmbH based inWeikersheim, GERMANY
Solar cells are the key components and the smallest units of a photovoltaic system. Combined to form solar modules, arrays or panels, they capture the solar radiation that impacts them. Direct current is generated between the upper and lower surfaces of the ...