- Home
- Equipment
Refine by
Electroair Energy Equipment & Supplies
9 equipment items found
Manufactured by:ElectroAir OÜ based inHarjumaa, ESTONIA
The power module IAC is designed to provide power to three-phase asynchronous motors with a frequency of 60 Hz during maintenance and commissioning in production. The power module can also be used for centralized power supply of work departments and test stands of ...
Manufactured by:ElectroAir OÜ based inHarjumaa, ESTONIA
The Battery driven ecogreen GPU APA-ECO series is designed to eliminate CO2 emissions with its unique technical characteristics. It can perform the complete service of aircraft at remote parking places with battery power, as well as the use of APA series GPUs indoors without any ...
Manufactured by:ElectroAir OÜ based inHarjumaa, ESTONIA
The frequency converters of our EAC series are developed for the ground servicing of all aircraft types with a frequency from 400 Hz up to 1000 kVA. EAC series converters assist with the fast, reliable and safe launch of aircraft engines. They provide an uninterrupted power supply when the aircraft is on the ground, reducing the amount of exhaust fumes and noise level within the airport area. ...
Manufactured by:ElectroAir OÜ based inHarjumaa, ESTONIA
The frequency converters of our EAC series are developed for the ground servicing of all aircraft types with a frequency from 400 Hz up to 1000 kVA. EAC series converters assist with the fast, reliable and safe launch of aircraft engines. They provide an uninterrupted power supply when the aircraft is on the ground, reducing the amount of exhaust fumes and noise level within the airport area. ...
Manufactured by:ElectroAir OÜ based inHarjumaa, ESTONIA
The EAC-PBB series units are meant to be installed under the passenger boarding bridge. The unit is neatly fitted under the bridge and the remote-control panel is installed in a location convenient for the operator. The under-bridge unit is usually supported with the power cable coil which is fully automated. The coil block is detachable, which makes it possible to customize the unit set location ...
Manufactured by:ElectroAir OÜ based inHarjumaa, ESTONIA
The new Generation EAR series rectifiers are designed to power on-board electrical equipment and launch aircraft and helicopters with a voltage of 28.5 VDC and a rated current of up to 1500 A continuously upon request they can be manufactured with great source output parameters), with an overload of up to 2500 A. The new Generation rectifiers are equipped with a MPCU microprocessor control plate, ...
Manufactured by:ElectroAir OÜ based inHarjumaa, ESTONIA
EA-HEATER is a high-performance diesel heater designed for heating aircraft using ventilated hot air during ground service and pre-flight preparation. The equipment is powered by a Kubota 4E60-OC engine with a 4.5 kW output, ensuring reliable operation even in extreme conditions. The unit supports a maximum output temperature of up to 130°C and an air delivery rate of up to 1725 CFM, making ...
Manufactured by:ElectroAir OÜ based inHarjumaa, ESTONIA
This is an exceptionally small Hybrid Diesel 28VDC GPU APA-10 for business jets and helicopters. APA-10 is especially designed to operate on diesel and Jet fuel. It is an excellent solution for providing 28,5V for helicopter facilities, business jets, and aviation training centers. The APA-10 is a hybrid GPU equipped with diesel engine for continuous power and batteries for engine starting mode. ...
Manufactured by:ElectroAir OÜ based inHarjumaa, ESTONIA
APA-GPU is Support equipment for checking the pneumatic, power (AC, DC) and hydraulic systems for engine start on the ground in the Surion(KUH) aircraft Unit is ready to start T700 series ...
