- Home
- Equipment
Refine by
Globecore Energy Equipment & Supplies
22 equipment items found
Manufactured by:GlobeCore - Biodiesel Division based inPoltava, UKRAINE
CMM-1.0LT unit is designed for thermal vacuum drying and filtration of industrial oils used in lubrication, sealing, hydraulic control systems of gas turbine and gas pumping units, gas engine compressors, and in transformers. In addition to oil purification, CMM-1.0LT may be used for heating and drying the oil-filled electrical ...
Manufactured by:GlobeCore based inPoltava, UKRAINE
The CMM mobile oil unit may be used for: Heating electrical equipment that contains dielectric insulating oil with hot oil, for vacuum drying of transformers; and for vacuumizing. The unit is best suited to facilities that install, repair and service oil filled electric power transformers and other oil filled electrical equipment. ...
Manufactured by:GlobeCore - Blending skid Systems based inOldenburg-Eversten, GERMANY
Essential operation and optimization of BioDiesel Blending systems in a flow is carried out by process engineers of the GLOBECORE company by whom it is developed and delivered on a mass production a number of mixing installations under the name “USB” of compounding of fuels and any liquids (from two to five components) in a flow including with components of a phytogenesis and ...
Manufactured by:GlobeCore - Blending skid Systems based inOldenburg-Eversten, GERMANY
Mixing (blending) of bunkering fuel oil using USB system. USB bunkering fuel oil mixers there are on oil barges, on piers, on the coast or in containers allow to make operators any type of fuel with the very precisely given a task viscosity and ...
Manufactured by:GlobeCore - Blending skid Systems based inOldenburg-Eversten, GERMANY
STRUCTURE AND PRINCIPLE OF COMPLEX OPERATION ON PRODUCTION OF BIODIESEL (biodiesel)The complex on production of the biodiesel consists of the following installations ...
Manufactured by:GlobeCore - Blending skid Systems based inOldenburg-Eversten, GERMANY
The GlobeCore Process is performed continuously on most energized transformers without the need to remove, replace, and dispose of contaminated Fuller’s Earth sorbent material. No hazardous waste and one man crew equals lower costs and efficient ...
Manufactured by:GlobeCore based inPoltava, UKRAINE
The GlobeCore CMM-0.6 Clean Marine unit is designed for purification1 and degassing2 of electric insulation oils3 on sea-faring vessels, off-shore platforms and wind-farms, in ship-works and wharfs. Water and ex-proof design allows to employ the unit in locations with high humidity, on open decks or in environments where flammable materials or explosive dust may form. CleanMarine is a ...
Manufactured by:GlobeCore based inPoltava, UKRAINE
The CMM-G unit is designed for a three-stage process of changing oil in wind turbine gearboxes (draining old oil, flushing the gearbox and filling it with new oil). The unit allows for quick and efficient servicing of wind turbine oil system. The unit can be used for servicing wind turbines made by many different manufacturers. The CMM-G can also heat clean ...
Manufactured by:GlobeCore based inPoltava, UKRAINE
GlobeCore regeneration units now offer two (2) revolutionary features: Energized transformer oil processing; and Automatic Sorbent Reactivation. The GlobeCore Process is performed continuously on most energized transformers without the need to remove, replace, and dispose of contaminated Fuller’s Earth sorbent material. No hazardous waste and a one man crew equals lower costs and efficient ...
Manufactured by:GlobeCore - Biodiesel Division based inPoltava, UKRAINE
CMM-10RL is designed for regeneration of transformer oils. The oil reclamation process involves the oil flowing through ten columns, ...
Manufactured by:GlobeCore - Biodiesel Division based inPoltava, UKRAINE
GlobeCore’s oil regeneration process restores used oils to a condition close to new oil. This process makes it possible to fill transformers with oil that would otherwise have been disposed of. The oil can be used in the transformer without replacement throughout its entire service ...
Manufactured by:GlobeCore - Biodiesel Division based inPoltava, UKRAINE
The CMMur-1L continues the excellent functionality of this series of equipment, but is designed to be more compact and ...
Manufactured by:GlobeCore based inPoltava, UKRAINE
The CMM-R transformer oil regeneration unit has been developed to extend transformer service life by restoring the dielectric strength and chemical composition of electrical insulation oil. The process of restoration involves removal of oil decomposition products and acidic compounds of the oil, which increases its oxidation stability and reduces gas solubility. The unique feature of the CMM-R ...
Manufactured by:GlobeCore - Blending skid Systems based inOldenburg-Eversten, GERMANY
Oil is high-molecular, heterogeneous liquid. Molecules are difficult focused with an atmospheric pressure and normal temperature. This energetically favorable balance of intermolecular and external forces is ...
Manufactured by:GlobeCore - Blending skid Systems based inOldenburg-Eversten, GERMANY
СММ-R12 Transformer Oil Regeneration Plant. Design and Operation. The unit comes in several configuration ...
Manufactured by:GlobeCore - Blending skid Systems based inOldenburg-Eversten, GERMANY
GlobeCore regeneration units now offer two (2) revolutionary features: (1) Energized transformer oil processing; and (2) Automatic Sorbent Reactivation. The GlobeCore Process is performed continuously on most energized transformers without the need to remove, replace, and dispose of contaminated Fuller’s Earth sorbent material. No hazardous waste and one man crew equals lower costs and ...
Manufactured by:GlobeCore - Blending skid Systems based inOldenburg-Eversten, GERMANY
This CMM 4/7 mobile oil processing unit is designed for degassing, removal of solids and heating of oil for power transformers with voltage up to 1,150 ...
Manufactured by:GlobeCore based inPoltava, UKRAINE
The GlobeCore regeneration process restores used oils to new like condition. This process makes it possible to fill transformers with oil that would previously require disposal. The oil in the transformer can be used without replacement for the entire service life of the transformer. The GlobeCore CMM-R systems are designed to extend transformer service life by restoring the dielectric ...
Manufactured by:GlobeCore based inPoltava, UKRAINE
This CMM 4/7 mobile oil processing unit is designed for degassing, removal of solids and heating of oil for power transformers with voltage up to 1,150 kV. The unit can be used to: heat electrical systems that contain insulating oil with hot oil, for vacuum drying of transformers and for vacuumizing. The unit is best suited to facilities that install, repair and service oil filled electric power ...
Manufactured by:GlobeCore based inPoltava, UKRAINE
The CMM-5M purifies removes water and particulate matter from industrial oil. The purification is achieved by pumping the oil through a special filter element with magnets. Filtration rate depends on the type of filter element installed. The machine operates in input, output and internal circulation ...