- Home
- Equipment
Refine by
Lab Energy Equipment & Supplies
15 equipment items found
Manufactured by:Multi Lab based inNewcastle upon Tyne, UNITED KINGDOM
For use resistance to Very high thermal shock resistance is required, along with hundreds or even thousands of rapid heating & cooling cycles are ...
Manufactured by:Multi Lab based inNewcastle upon Tyne, UNITED KINGDOM
BNP2 has all but identical properties to that of Shapal M and is a very cost effective alternative, it should be machined & treated in exactly the same ...
Manufactured by:All Power Labs based inBerkeley, CALIFORNIA (USA)
The PP30 is the latest generation of the Power Pallet biomass gasifier genset system. It represents the largest upgrade of the capabilities and convenience of the Power Pallet up to this ...
Manufactured by:LAB-KITS, brand of U-THERM International HK Limited based inKowloon, HONG KONG
The Abrasive Index (AI) tester for coal is designed and developed according to GB/T15458-2006 "Method for Measuring Abrasive Index of Coal". It is specially designed to measure the degree of abrasiveness and tear of the lignite, bituminous coal and anthracite coal under the specified conditions when being ground, that is, the harder the coal, the greater the AI value. This is an important ...
Manufactured by:Spectra Lab Instruments Pvt. Ltd. based inNavi Mumbai, INDIA
These are basically miniature Thermoelectric Solid State Systems, designed on the principle of peltier effect. In many situations in day to day laboratory analysis, need of analysis at subambient temperature arises. The lab chemist has to use either an elaborate and bulky compressor based cooling system or use ice. Both these options have their own ...
Manufactured by:Entropea Labs based inLondon, UNITED KINGDOM
Rankine cycles have been used throughout the industrial history to convert thermal energy into kinetic energy and/or electricity. Rankine cycles work by evaporating a working fluid at a high pressure (cycle top pressure), energy is subsequently extracted from the working fluid by means of an expansion process (pressure reduction to bottom pressure), and finally the working fluid is condensed and ...
Manufactured by:Guangzhou RaySky Scientific Instruments Ltd based inYuelu District, CHINA
Performance reliability: overall composite rotor, high strength, stable performance. Clean oil-free: adopt with grease lubricated precision ceramic bearings .no oil vapor contamination. Any angle: can be installed at any angle for easy system integration. Easy to use: water, electricity, gas interface connection simple and convenient, customers can choose air or water cooled depending on the ...
Manufactured by:All Power Labs based inBerkeley, CALIFORNIA (USA)
Our biochar specs vary somewhat with feedstock, but the following is a representative example of a biochar made with wood chips using our CharPallet biochar reactor. Highest processing temperature (HTT): 1,100°C . Feedstock: wood chips (unknown species; sourced from urban green waste). Sample name: PP30 V3.0 Proto1 Old Wood Chips ...
Manufactured by:All Power Labs based inBerkeley, CALIFORNIA (USA)
Polycyclic Aromatic Hydrocarbons (PAHs) are persistent organic pollutants that form out of the evolution of tar exposed to excessively high temperatures. The CharPallet has the remarkable ability to consistently produce biochar with extremely low tar levels. Total PAHs are typically less than 2mg/kg ...
Manufactured by:P. Energy based inFontaniva (Pd), ITALY
LAB-LAMINATOR L036LAB is an automated photovoltaic module laminator. LAB-LAMINATOR L036LAB is the right solution for Schools, Universities, Laboratories, R&D Centres. It is the best laminator to encapsulate little laminates as standard modules made with plastic, glass or other material. It permits to laminate in standard mode using a standard cure EVA or using a fast cure ...
Manufactured by:All Power Labs based inBerkeley, CALIFORNIA (USA)
The ALL Power Labs CharTainer is a compact, high-volume, Combined Heat and Biochar (CHAB) pyrolyzer system enclosed within a standard 20-foot shipping container. The system is fully automated and complete – from biomass hopper, gasifier-retort, and clean-burning flare with heat exchangers to biochar takeoff – all integrated within the shipping container envelope. The CharTainer uses a ...
Distributed by:Plas-Labs, Inc. based inLansing, MICHIGAN (USA)
Plas-Labs now offers an 'Illuminated Rodent Tail Vein Injection Cone'. The 562-IRC features our 'bright light' illumination system, rechargeable batteries and recharge unit, clear plastic tail insertion cone, formed white base housing batteries, on/off switch, base and plug for recharging batteries. Clear plastic tail insertion cone. Formed white base housing batteries, on / off switch, and ...
Manufactured by:All Power Labs based inBerkeley, CALIFORNIA (USA)
The 80 kWe containerized Power Pallet system also provides 100 kWth of thermal energy via the integrated CHP systems from the two PP30s. Also included is a battery storage system and inverter to allow the continuous 50 kW output of the Power Pallets to be combined with an additional 30 kW from the batteries for a combined intermittent output of 80 kWe. These are bespoke systems that will be ...
Manufactured by:All Power Labs based inBerkeley, CALIFORNIA (USA)
The ALL Power Labs CharPallet 25 (CP25) integrates extensive innovations into our third-generation smart, compact, and versatile v3.0 biomass gasifier system which can convert up to 25 kg/hr of waste biomass into biochar, syngas, and heat. These developments are in response to increasing demands for reliable biomass processing for the biomass/biofuel research sector, efficient biomass waste ...
Manufactured by:LAB based inLyon, FRANCE
Flue Gas Condensation combined with combustion air humidification. Heat recovery is maximized by condensing moisture from the flue gas and by humidifying the combustion air. Increasing the humidity level in the combustion air enhances the latent heat potential, allowing more energy to be absorbed during the combustion process. ...