Logo Energy XPRT
Companies
Products
Services
Software
Training
Applications
Sign in
List your business
Huntron
About
  2. Companies
  3. Huntron
  4. Products
  5. Huntron - Model 2800S - Conventional ...

Huntron - Model 2800S -Conventional Test Instruments

SHARE
The Huntron Tracker 2800S is designed to complement conventional test instruments in the debug and troubleshooting process. Using the proven power-off test method known as Analog Signature Analysis it eliminates the risk of further circuit damage, which often occurs when power is applied. The Huntron Tracker 2800S is suited for today's varied signal circuit cards where Analog and Digital are mixed together. The Tracker 2800S features variable range parameters resulting in over 100 combinations of voltage, source resistance, and frequency. The Tracker works by applying a current-limited AC signal across two points of a component. The current flow causes a vertical signature deflection, while the applied voltage causes a horizontal deflection. Together they form a unique V/I signature that represents the overall health of the device under test. Analyzing the signature can quickly determine whether the component is good, bad, or marginal.
Most popular related searches
voltage testing system
power testing
power test
cable tracker

The Tracker 2800S features two 40 pin IDC connectors (one per channel) where custom cable interfaces can be used to quickly scan PCB connectors as a type of "first pass" test. If signature differences are detected then you can trace the connector pin to the component level saving you troubleshooting time.

  • Optional Software Control using Huntron Workstation
  • Enhanced Range Selections
  • Full Screen Signature Zoom
  • Color Touch Screen controls
  • Huntron SigAssist® built-in
  • Built-in DC Voltage Source for testing gated devices (i.e. SCRs, relays, etc.)
  • Up to 40 pin scanning with the Tracker 2800S

Part Numbers: 99-0402; 99-0423 with Workstation software
Number of Voltages plus values: 6 voltages: 200mV, 3V, 5V, 10V, 15V, 20V
Number of Resistances plus values: 9 resistances: 10Ω, 50Ω, 100Ω, 500Ω, 1kΩ, 5kΩ, 10kΩ, 50kΩ and 100kΩ
Number of Frequencies plus values: 6 frequencies: 20Hz, 50Hz, 60Hz, 200Hz, 500Hz and 2kHz
Range Selection: Manual or use Auto Scan; Optional Software control
Front Panel Connections: Banana jacks for A/B Test channels and Common; A and B 40 pin IDC connectors for cable based scanning (i.e. interface to PCB connectors)
DC Voltage Source for testing gated devices: Variable voltage from 0 to 10VDC; 200mA max.